About The Position

Responsible for installing, programming, testing, and maintaining protective relaying and metering systems used in transmission and distribution operations. The role supports electrical system reliability and safety through diagnostic evaluations, interpretation of schematics, and coordination of repairs. The engineer performs acceptance and maintenance testing of electrical power systems and protective relays, circuit breakers, switchgear, transformers, and related equipment. Work includes commissioning installations, troubleshooting failures, analyzing test results, documenting findings, coordinating with engineers, project managers, clients, and other department personnel, and providing technical guidance to junior technicians as needed. The position involves work in energized electrical rooms, vaults, substations, industrial sites, data centers, and utility environments, as well as domestic and international travel.

Requirements

  • At least 10 years of relevant electrical experience, or an associate degree and at least 8 years of relevant electrical experience, or a bachelor's degree and at least 5 years of relevant electrical experience.
  • Valid and active U.S. work authorization.
  • Willingness and ability to travel domestically and internationally up to 25%–50% of the time.
  • Ability to interpret electrical schematics, wiring diagrams, and technical manuals.
  • Strong understanding of ANSI, IEEE, NETA, NFPA, NEC, and OSHA electrical safety standards.
  • Proficiency in operating and troubleshooting protective relays, circuit breakers, transformers, switchgear, and other electrical equipment.
  • Experience with electrical test equipment such as Doble, Omicron, Megger, Vanguard, and Fluke meters.
  • Understanding of insulation resistance, power factor, contact resistance, and high-potential testing procedures.
  • Knowledge of medium- and high-voltage systems up to 500 kV, including arc-flash hazard analysis.
  • Strong troubleshooting and analytical skills, including the ability to diagnose system failures.
  • Ability to work safely under minimal supervision and follow industry best practices.
  • Ability to work in industrial, data center, and utility environments.
  • May need to use a company vehicle and must have an acceptable driving record under company policy.
  • Ability to lift, carry, and move objects weighing up to 50 pounds regularly, using proper lifting techniques and safety protocols.
  • Ability to relocate a 12-foot stepladder without assistance.
  • Ability to work at heights up to 60 feet and climb and maintain balance on scaffolds, aerial lifts, catwalks, and ladders.
  • Ability to routinely and repetitively walk, climb, lift, squat, crawl, kneel, push, pull, and reach overhead.
  • Good vision, which may be corrected, ability to see colors, and ability to hear and communicate in English.
  • Ability to use a standard ladder without exceeding its weight limit while carrying tools.
  • Ability to recognize when something is wrong or likely to go wrong.
  • Ability to apply general rules to specific problems, combine information to form conclusions, and see details at close range.
  • Ability to listen to and understand information presented through spoken words and sentences.

Nice To Haves

  • NETA or NICET certification, or equivalent hands-on experience in electrical testing.
  • OEM-certified field service training program.

Responsibilities

  • Install, program, maintain, test, and repair protective relays, metering systems, associated wiring, and related equipment.
  • Perform electrical tests and repairs to evaluate in-service relays and prevent or remedy abnormal operation or failure of transmission and distribution equipment.
  • Use hand tools, power tools, meters, and test equipment in energized electrical rooms, vaults, and substations.
  • Read, interpret, review, and correct schematics, wiring diagrams, blueprints, and substation drawings.
  • Program and operate test equipment and follow safe work practices outlined in the company safety handbook.
  • Commission new relay and metering installations.
  • Coordinate testing, troubleshooting, and repairs with other department personnel.
  • Perform maintenance and testing on relays and associated equipment, including standby generators and display meters.
  • Troubleshoot, repair, and replace components involved in questionable equipment operation or failures.
  • Perform acceptance and maintenance testing of electrical power systems to ensure compliance with NETA standards.
  • Conduct protective relay testing, calibration, and programming for various manufacturers.
  • Perform circuit breaker and switchgear testing, including timing and primary and secondary injection tests.
  • Troubleshoot electrical faults and perform root-cause analysis of system failures.
  • Conduct transformer testing, including turns ratio, insulation resistance, and power factor tests.
  • Follow electrical safety protocols, including lockout/tagout procedures and PPE requirements.
  • Maintain detailed test reports and documentation for compliance and client review.
  • Collaborate with engineers, project managers, and clients to support system commissioning and startup.
  • Provide mentorship and technical guidance to junior technicians as needed.
  • Participate in emergency callouts.
  • Perform other duties, tasks, and special projects as assigned.

Benefits

  • Competitive salary
  • Medical, dental, vision, life, and disability insurance
  • Paid time off
  • Tuition reimbursement
  • 401(k) retirement plan
  • Military Reserve pay offset
  • Paid maternity leave
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service