Technical Operator, Packaging – 4th shift

Mylan Technologies•St. Albans, VT

13d•Onsite

About The Position

Viatris is a global healthcare company uniquely positioned to bridge the traditional divide between generics and brands, combining the best of both to more holistically address healthcare needs globally. With a mission to empower people worldwide to live healthier at every stage of life, we provide access at scale, currently supplying high-quality medicines to approximately 1 billion patients around the world annually and touching all of life's moments, from birth to the end of life, acute conditions to chronic diseases. The Technical Operator role will make an impact by performing and/or verifying all equipment related set-up activities, assuring that the set-up is conducted per SOP’s and related instructions. This role will also assure that the appropriate product dedicated equipment, kits, tooling, idlers, etc. are utilized for the process and that all process related equipment and change parts are cleaned according to procedure and are in good repair, prior to set-up activities and following batch runs. The Technical Operator will perform and/or verify all required system related checks, sensor checks, start-up/shift checks/testing prior to processing and assure that all results meet specification and are well-centered within control ranges (where appropriate). This role will monitor run performance of equipment through monitoring CPPs, KPPs, in-process quality checks/testing, yields, and overall run efficiencies to identify any adverse trends and/or failures of the equipment and/or control systems. The Technical Operator will respond to all equipment faults, alarms, jams, etc. to identify cause and remediate, and make appropriate adjustments when necessary. This role will lead equipment related problem solving and troubleshooting with Lead Operator and support groups and assure required actions are taken to resolve to issues and return the equipment to operating conditions. The Technical Operator will assist with equipment PMs and calibrations, as needed, and participate in defining user requirements for new systems and the execution of equipment/system IQ, OQ, PQ’s. This role will support content creation/review of technical instructions and training documents and provide oversight of training on technical-related tasks on the production lines. The Technical Operator will provide technical input into events or investigations on routine equipment/systems issues including assisting in identifying potential root causes and assisting in corrective and preventative actions. This role will work with Engineering Production Support and QA Validation in the recommendation, implementation and qualification of equipment and controls improvements as requested and participate in the execution of technical studies as needed. The Technical Operator may serve as back-up to Senior Operator/Lead Operator roles and perform other duties as assigned.

Requirements

Minimum of seven (7) years of relevant experience and a High School diploma (or equivalent) required.

Nice To Haves

A technical degree/certification and three (3) years relevant experience preferred.
A combination of experience and/or education will be taken into consideration.

Responsibilities

Performs and/or verifies all equipment related set-up activities, assuring that the set-up is conducted per SOP’s and related instructions.
Assures that the appropriate product dedicated equipment, kits, tooling, idlers, etc. are utilized for the process.
Assures that all process related equipment and change parts are cleaned according to procedure and are in good repair, prior to set-up activities and following batch runs.
Performs and/or verifies all required system related checks, sensor checks, start-up/shift checks/testing prior to processing and assures that all results meet specification and are well-centered within control ranges (where appropriate).
Monitors run performance of equipment through monitoring CPPs, KPPs, in-process quality checks/testing, yields, and overall run efficiencies to identify any adverse trends and/or failures of the equipment and/or control systems.
Responds to all equipment faults, alarms, jams, etc. to identify cause and remediate.
Makes appropriate adjustments when necessary.
Leads equipment related problem solving and troubleshooting with Lead Operator and support groups and assures required actions are taken to resolve to issues and return the equipment to operating conditions.
Assists with equipment PMs and calibrations, as needed.
Participates in defining user requirements for new systems and the execution of equipment/system IQ, OQ, PQ’s.
Supports content creation/review of technical instructions and training documents.
Provide oversight of training on technical-related tasks on the production lines.
Provides technical input into events or investigations on routine equipment/systems issues including assisting in identifying potential root causes and assisting in corrective and preventative actions.
Works with Engineering Production Support and QA Validation in the recommendation, implementation and qualification of equipment and controls improvements as requested.
Participate in the execution of technical studies as needed.
Perform other assigned duties in alignment with current training (i.e. may serve as back-up to Senior Operator/Lead Operator roles).
Perform other duties as assigned.