Station Electrician C-A

American Electric Power•Columbus, OH

8d•$31 - $59•Onsite

About The Position

Perform all types of work involved in the construction, maintenance, rebuild, removal, operation, testing and inspection of energized or de-energized generation, transmission and distribution facilities. Assist in responding to emergency call-outs on station trouble and coordinating prompt restoration of service to customers as required. This role involves working on energized equipment up to 260 volts, and after six months, assisting with work on conductors and equipment energized at voltages above 750 volts with direct supervision. The position requires selecting proper prints and/or drawings, understanding them, and using various test equipment. Responsibilities include assisting in the maintenance and repair of station transformers, circuit breakers, rotating machinery, and other station equipment, as well as installing and maintaining station batteries. Tasks also involve assisting with station work such as installing conduit, pipe, cable, and wire, digging trenches, and climbing station structures. The role requires using various tapes, insulating materials, and understanding their application. It includes assisting in visual inspections, reading gauges, and applying start-run-stop tests on emergency generators and pumps. Replacing lamps, switches, and outlets, and installing/maintaining signal and communication systems are also part of the duties. The position involves assisting in electrical tests, station switching, checking equipment clearances, making de-energized tests, and placing grounds. Knowledge of steel and aerial lift rescue is required. The role also includes maintaining records, preparing reports, attending and participating in training, and assisting in training other employees. Use and operation of various company vehicles, specialized equipment, and hand/power tools are necessary. Performing duties incidental to the operation of such equipment, inspecting and storing personal protective equipment, and knowledge of various knots used in station work are also required. Performing similar or less skilled work as assigned, assisting employees of equal or higher classification, and directing the work of employees assigned to assist are expected. Adherence to the Company's safety rules, practices, resuscitation, First Aid, and operating regulations is mandatory.

Requirements

Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience.
Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician); or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another utility or contractor.
No previous work experience required for Station Electrician C.
Must be available to work overtime, call-out overtime and shift work, as required.
Travel requirements are expected > 50 % of the time.
Minimum of 24 months satisfactory work experience as a Station Electrician C or the equivalent for Station Electrician B.
Minimum of 24 months satisfactory combined work experience as a Station Electrician B or Station Electrician B-Certified or the equivalent for Station Electrician A.
Valid Class A CDL is required.
Knowledge of print reading sufficient to interpret and apply information from drawings, instruction manuals, one-line diagrams, and associated documents.
Must satisfactorily complete, in such time frames as may be established by the Company, all required training to advance to the next higher classification in the line of progression, or vacate the current classification.
Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Station Electrician A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company.
Ability to deal with customers and other employees in a courteous and professional manner.
Ability to plan work and to properly instruct and brief others.
Employee shall obtain the appropriate valid commercial driver's license prior to the end of the designated probationary period.
Must meet all vehicle operation requirements as designated by federal and/or state law.
Considerable travel and overtime may be required to complete work assignments.
Must successfully complete Physical Abilities Test (PAT).
Successful candidate must live or be willing to relocate within 45 minutes of the Columbus Transmission Service Center (580 Old Morrison Road Columbus, Ohio 43213).
Minimum Requirement Station Electrician: Amount of Weight Lifted from Floor/Ground to Waist Level: 75 lbs.
Amount of Weight to be Carried for 20 Feet: 60 lbs.
Amount of Weight Lifted to Chest Level: 50 lbs.
Amount of Weight Lifted to Eye Level: 30 lbs.
Distance to Walk Accumulated over the Course of an 8-Hour Shift: ½ Mile.
Distance in Feet to Climb and Work on a Ladder/Structure: 50 and Higher.
Distance in Feet to Ascend to and Work in a Bucket/Lift: 100 and Higher (Tested at 60’).
Ability to Discriminate between Colors: Yes (Tested).

Responsibilities

Work on energized equipment up to 260 volts.
Assist in work on conductors and equipment energized at voltages above 750 volts with direct supervision or assistance of personnel in higher classification after six months.
Select proper prints and/or drawings for various work and have a basic understanding of each.
Use voltmeters, ohmmeters, ammeters, insulation meggers and other test equipment associated with station work.
Assist in disassembling and reassembling, inspecting, maintenance, and repairing of station transformers, circuit breakers, portable substations, rotating machinery, network protectors and transformers, air ducts and heat exchangers.
Install and maintain station batteries.
Replace nitrogen bottles and air filters.
Assist in station work such as installing conduit, pipe, cable and wire.
Use hand lines to pass tools and materials.
Dig and backfill trenches.
Remove and spread stone.
Uncrate equipment and material.
Install and remove portable substation fences, barriers and safety signs.
Paint structures and equipment.
Climb station structures.
Use various kinds of tapes, insulating materials, protective and insulating paints and varnishes, and understand proper application of each.
Assist in making visual inspections such as check lights, heaters, circuit breaker counters, oil levels, and bus connections.
Read gauges such as voltmeters, ammeters, hydrometers, pressure and level gauges.
Apply start-run-stop tests on emergency generators, water and sump pumps and fire engine motors.
Report abnormal conditions.
Replace lamps, switches, duplex outlets, dry cells.
Install and maintain signal and communication systems.
Assist in various tests involving oil samples, connecting and operating portable and stationary oil handling equipment.
Assist in electrical tests, TTR, Doble, core megger and resistance for transformer testing, etc.
Assist in station switching including use of radio communication and/or direct instruction from higher classification.
Assist in checking equipment clearances and making de-energized tests.
Place grounds as directed.
Knowledge and proficiency in steel and aerial lift rescue.
Maintain records and prepare and submit reports as required.
Attend and participate in training and assist in the training of other employees as assigned.
Use and operate various company vehicles, specialized equipment, hand and power tools.
Operate company vehicles, cranes, aerial lifts and specialized equipment.
Perform duties incidental to the operation of such equipment.
Use hand and power tools.
Operate portable generators, blowers and pumps.
Inspect and store personal protective equipment.
Knowledge and use of various knots used in station work.
Perform similar or less skilled work as assigned.
Assist employees of equal or higher classification.
Direct the work of employees assigned to assist.
Become familiar with the Company's safety rules and practices and in the application of resuscitation and First Aid as presented in the Company's Safety Manual.
Perform duties in accordance with the Company's safety rules and operating regulations and practices.