Utility 17- Slitting Line Operator

ABB•Saint Louis, MO

9d•Onsite

About The Position

At ABB, we help industries run leaner and cleaner. This position reports to the Manufacturing Manager - NEMA. The Utility 17 - Slitting Line Operator is primarily responsible for operating the slitting line, but must also be flexible to perform other positions as needed, including Auto Press, Punch Press, Annealing Lead, and Crane operations, without compromising safety. The role requires performing essential job functions for a minimum of 8 hours per day, 5 days a week. ABB will discuss and attempt to provide reasonable accommodations if an employee is unable to perform these essential functions.

Requirements

Understand and follow all ABB safety policies, safety training, and hazard communication requirements.
Wear proper personal protective equipment (PPE) including safety glasses, hearing protection, safety shoes, cut-resistant gloves, and safety sleeves when required.
Locate and verify Emergency Stops and light curtains function properly.
Verify Press Release Forms (QFSL-A001) are supervisor-signed before operation.
Ability to lift and/or carry up to 50 pounds.
Frequently grip with hands, turn, push, and bend.
Occasionally reach above shoulder level and pull.
Walk and/or stand for extended periods and maintain pace with demanding production requirements.
Operate electric pallet trucks, cranes, and material handling equipment.
Possess dexterity and hand-eye coordination to operate various hand tools, power tools, and equipment including electric chain hoists, pneumatic shears, pneumatic wire twisters, electric and manual pallet jacks, and press controls with knobs and buttons.
Assist in performing press-line equipment set-up and clearing die jams.
Perform equipment shutdown procedures and end-of-run die cleaning.
Ability to perform quality inspections including visually inspecting parts for burrs, chips, slug marks, bent teeth, and missing features.
Inspect parts before continuous runs.
Conduct flatness checks three times per coil using back-to-back method.
Match parts to blueprints.
Verify inventory tags, coil numbers, and blueprints match work orders to ensure quality standards.
Ability to comprehend and follow written and verbal instructions.
Read, write, and use a calculator.
Read and interpret work orders, blueprints, inventory tags, and shipping labels.
Complete required documentation including Non-Con Red Tags for defective material.
Follow established procedures and work instructions.
Maintain regular work attendance including arriving on time and remaining at work until end of scheduled workday.
Demonstrate reliability and commitment to scheduled work hours.
Ability to work daily and weekend overtime, including overtime on short notice, to meet production demands.

Nice To Haves

Flexibility to perform other positions as needed, including Auto Press, Punch Press, Annealing Lead and Crane operations.

Responsibilities

Operate the slitting line.
Perform other positions as needed, including Auto Press, Punch Press, Annealing Lead, and Crane operations.
Understand and follow all ABB safety policies, safety training, and hazard communication requirements.
Wear proper personal protective equipment (PPE) including safety glasses, hearing protection, safety shoes, cut-resistant gloves, and safety sleeves when required.
Locate and verify Emergency Stops and light curtains function properly.
Verify Press Release Forms (QFSL-A001) are supervisor-signed before operation.
Work safely and report injuries, accidents, and near misses immediately.
Lift and/or carry up to 50 pounds.
Frequently grip with hands, turn, push, and bend.
Occasionally reach above shoulder level and pull.
Walk and/or stand for extended periods and maintain pace with demanding production requirements.
Operate electric pallet trucks, cranes, and material handling equipment.
Possess dexterity and hand-eye coordination to operate various hand tools, power tools, and equipment including electric chain hoists, pneumatic shears, pneumatic wire twisters, electric and manual pallet jacks, and press controls with knobs and buttons.
Assist in performing press-line equipment set-up and clearing die jams.
Perform equipment shutdown procedures and end-of-run die cleaning.
Perform quality inspections including visually inspecting parts for burrs, chips, slug marks, bent teeth, and missing features.
Inspect parts before continuous runs.
Conduct flatness checks three times per coil using back-to-back method.
Match parts to blueprints.
Verify inventory tags, coil numbers, and blueprints match work orders to ensure quality standards.
Comprehend and follow written and verbal instructions.
Read, write, and use a calculator.
Read and interpret work orders, blueprints, inventory tags, and shipping labels.
Complete required documentation including Non-Con Red Tags for defective material.
Follow established procedures and work instructions.
Maintain regular work attendance including arriving on time and remaining at work until end of scheduled workday.
Demonstrate reliability and commitment to scheduled work hours.
Work daily and weekend overtime, including overtime on short notice, to meet production demands.

Benefits

Health insurance (PPO plan or High Deductible Health Plan with HSA)
Dental insurance (Core and Core Plus)
Vision benefit
Company paid life insurance (2X base pay)
Company paid AD&D (1X base pay)
Voluntary life and AD&D
Short Term Disability (up to 26 weeks, Company paid)
Long Term Disability (60% of pay, Company paid, with option to buy up to 66 2/3%)
Supplemental benefits (Accident insurance, hospital indemnity, critical illness, pet insurance)
Parental Leave (up to 6 weeks)
Employee Assistance Program
Health Advocate support resources
Employee discount program
401k Savings Plan with Company Contributions
Employee Stock Acquisition Plan (ESAP)
11 paid holidays
Full vacation accrual