Shipper & Receiver

Jeld-Wen Inc.•Dodson, LA

7d•Onsite

About The Position

Qualified personnel are knowledgeable and efficiently perform all duties and responsibilities of a Shipper & Receiver. Individual is proactive in addressing different challenges and willing to adapt, based on the business needs. Individual understands tasks and/or duties may change based on business needs and training purposes. Management reserves the right to seek external candidates if needed.

Requirements

Wear hearing protection, safety glasses, and steel toe footwear at all times.
Stay aware of the job at hand and be alert for slippery floors.
Keep work area clean and free of debris.
Long hair must be tied back above collar.
Loose clothing is not allowed on plant floor including but not limited to: Dangling Pant Legs, Neck Ties, Long or Dangling Belts, and Hooded Sweatshirts.
No jewelry is allowed including but not limited to: Rings, Watches, and Necklaces.
Use proper lifting techniques.
Watch for forklift traffic.
Maintain three points of contact and use caution when climbing stairs and ladders.
Only use an approved low pressure device to remove fiber and sawdust from clothing.
Lockout/Tagout all sources before working on equipment.
Avoid contact with hot steam pipes.
Comply with all safety training including but not limited to: Do not operate any equipment or tools that have missing guards or safety devices, Lockout/Tagout, Confined Space, Fall Protection, Ergonomics, Forklift, PPE, Emergency Preparedness, Hazard Communication, Electrical Safety and Blood-borne Pathogen Prevention.
Discuss all non-routine tasks with your manager prior to start.
Eye Protection, Hearing Protection, Gloves when handling skins, and Fall Protection when working at unguarded heights above six feet or when traveling and/or operating any high lift equipment.
Face shield and safety glasses are required: When you are using or within 10 feet of any of the following: wire wheels, power wire brush, cut off wheel, portable grinder, bench grinder.

Responsibilities

Operate forklift in a safe and efficient manner.
Load trailers for outbound shipments.
Unload trailers with incoming shipments.
Assure proper relief before departing – Overtime may be required.
Ensure proper labeling and packaging of finished door skin loads.
Ensure trucks are loaded with correct quantities and products.
Ensure all shipping records are complete and accurately maintained.
Ensure loads are stacked correctly to avoid product damage.
Maintain forklifts and clean as needed.
Assist with primeline cleanups as needed.
Maintain housekeeping and organization in warehouse.
Communicate with Shipping Lead and Warehouseman throughout the shift regarding process and inventory conditions.
Communicate with oncoming and off going personnel to ensure continuity between shifts.
Communicate effectively with management regarding issues, adjustments, and changes that have taken place. Notify them of supply issues, maintenance needs, hazards, and accidents/injuries.
Maintain complete and accurate written and/or electronic records and data.
Complete daily forklift inspections.
Be familiar with components, sub-systems, support systems, and terminology of the equipment.
Perform/assist in maintenance and preventive maintenance tasks to minimize downtime.
Crosstrain and fill in for the Warehouseman and Packager as required.
Abide by all company policies and procedures.
Maintain required tools for use on the job.
Implement and understand 5S.
Perform all other duties assigned by management.