Rotary Kiln Operator - Night Shift

RHI Magnesita•West Manchester Township, PA
•Onsite

About The Position

As a Rotary Kiln Operator at RHI Magnesita, you will monitor and adjust kiln operations from the control room, coordinate with field operators, and use quality test results to keep production on specification. The position also involves working on the plant floor, operating mobile equipment, and handling materials that keep the kilns running. You will train and test on the Feed End, Finish End, and Rotary Burner positions; time spent in each position varies by assignment and seniority. Work takes place indoors and outdoors and may involve heat, cold, dust, noise, elevated work areas, and confined spaces. The job requires standing, walking, bending, kneeling, pushing, pulling, climbing, lifting and carrying up to 75 pounds, and climbing ladders or stairs up to three or four stories several times per shift. Required personal protective equipment includes a hard hat, safety glasses, safety shoes, and gloves. A respirator is required in designated areas, and employees must successfully complete a medical evaluation and fit test. Fall protection harness use requires successful fitting and training. All work must follow RHI Magnesita’s Health and Safety, EHS, and IMS policies and procedures.

Requirements

  • Ability to work the overnight 3/1/3 rotating schedule.
  • Ability to train and successfully test on the Feed End, Finish End, and Rotary Burner positions.
  • Ability to operate trucks, haulers, loaders, and forklifts using standard hand and foot controls.
  • Ability to meet the physical demands and personal protective equipment requirements described in the job posting.
  • Ability to lift and carry up to 75 pounds and climb ladders or stairs up to three or four stories several times per shift.
  • For designated respirator use, successfully complete a medical evaluation and fit test.
  • Successfully complete fitting and training for fall protection harness use.

Responsibilities

  • Operate and monitor rotary kiln systems, including monitoring, analyzing, and adjusting both kilns from the control room and starting up or shutting down equipment as needed.
  • Monitor equipment from the stone feed bins through the finished grain bins in the Old Sizing Plant, including conveyors, exhaust systems, baghouses, kiln coolers, and stacks.
  • Support and provide direction to field operators to coordinate plant operations.
  • Promote safe work practices, keep plant areas clean and orderly, and communicate equipment issues and process changes to the incoming shift; record updates in the Plant Notes Program.
  • Collect brick grain samples at designated times and test them for bulk density.
  • Review lab results and adjust process settings to maintain product quality.
  • Record daily kiln production, inventory transactions, and environmental compliance data in SAP; compare physical bin inventory with SAP records and adjust as needed.
  • Operate articulated haulers, wheeled loaders, skid steers, and forklifts.
  • Load bulk trucks with designated materials, including Mag, dust, and brick grain.
  • Haul dust to the waste pile or load customer dust trucks as needed.
  • Keep coal and coke bins filled and stockpiles orderly and safe.
  • Follow RHI Magnesita’s Health and Safety, EHS, and IMS policies and procedures.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service