QA/QC Inspector I

ACCO Engineered Systems•Phoenix, AZ

About The Position

The QA/QC Inspector I performs visual inspection and verification of materials, equipment, piping systems, welding, and brazing installation work on assigned projects and in fabrication shops. The inspector records results as objective evidence and works to project specifications, applicable ASME piping codes, manufacturer requirements, customer site requirements, and ACCO’s welding program requirements. This is an entry-level inspection position below Inspector II and Inspector III. The inspector performs inspections within the scope of an inspection plan established by the QA/QC Area Supervisor or assigned Inspector III, and maintains complete, retrievable inspection records. Technical direction comes from an assigned Inspector II or III, or, if neither is assigned, the next QA/QC manager in line. The role supports fabrication, installation, and project management as part of the project team. Day-to-day field and shop coordination is provided by local project leadership, while inspection decisions and quality records follow the QA/QC reporting line. The position requires travel among offices, fabrication facilities, and project sites based on business needs. Work location varies by assignment, and overnight travel may be required. Hours and shifts follow project requirements; overtime, shift work, and weekend coverage may occur and are compensated according to company policy and applicable law. The role is non-exempt, and work and qualifying travel time must be recorded accurately. The position has no direct reports.

Requirements

  • At least three years of experience in construction or fabrication quality control.
  • One to two years of experience on semiconductor, high-purity, cleanroom, data center, or comparable technically demanding projects, such as cleanroom piping, process utilities, tool hook-ups, or chemical and gas systems.
  • Current ASNT or ACCP VT Level I or Level II certification, at the level set by assigned duties and project requirements, meeting the ACCO Standard Written Practice and examination requirements and approved by the ACCO ASNT Level III.
  • Annual Jaeger J1 near-vision examination.
  • Ability to read and interpret isometrics, P&IDs, shop drawings, specifications, and inspection reports.
  • Working knowledge of weld and braze visual acceptance criteria, mechanical piping systems, and high-purity cleanliness and workmanship standards.
  • Ability to write clear, factual inspection reports.
  • Regular and routine attendance.
  • Valid driver’s license and reliable transportation to assigned project sites.
  • Ability to travel to offices, regional branch offices, fabrication facilities, and project sites as business needs require, including overnight travel when required.
  • Ability to work project-dependent hours, which may include overtime, shift work, and weekend coverage.
  • Ability to accurately record hours worked, including time spent traveling between sites during the workday.
  • Ability to meet the described physical demands, with reasonable accommodations where applicable, including lifting, moving, walking, climbing, sitting, stooping, kneeling, crouching, crawling, and accessing elevated work areas and confined spaces using required fall protection and personal protective equipment.

Nice To Haves

  • Familiarity with PT, MT, UT, and RT sufficient to read a third-party examination report and understand what was examined, the criteria used, and the result; certification to perform these methods is not required.
  • OSHA 10 or OSHA 30 training.
  • Confined space training.
  • First aid and CPR training.
  • Experience with Box, Bluebeam, Smartsheet, Procore, or PlanGrid.
  • Conversational Spanish.

Responsibilities

  • Visually inspect welded, brazed, soldered, and mechanical joints, including grooved couplings, press fittings, flanges, and threaded connections.
  • Inspect pipe fit-up, alignment, joint preparation, cleanliness, support and hanger installation, and general workmanship.
  • Perform receiving inspections of materials and equipment against submittals, packing lists, and required documentation.
  • Perform in-process and final visual inspections of high-purity process piping, clean utilities, chemical and gas systems, hydronic systems, and HVAC mechanical systems.
  • Attend scheduled hold and witness points and participate in pressure tests, system walkdowns, punch-list inspections, and pre-turnover verification.
  • Verify compliance with project specifications, customer site requirements, applicable ASME and AWS codes, manufacturer requirements, and ACCO procedures.
  • Verify that welding procedure specifications in use are approved and applicable, and that welder qualifications and continuity are current for the process in use.
  • Verify material traceability, including heat numbers, material test reports, and lot identification, for inspected work.
  • Verify measuring and test equipment is within its calibration period.
  • Submit a daily inspection report with photographs for every project day worked, filing it to the project QA/QC folder the same day.
  • Complete inspection records, weld maps, fit-up logs, brazing logs, torque logs, and visual inspection records legibly and contemporaneously with the work.
  • Document nonconforming conditions with sufficient description, location, and photographic evidence for readers who were not present to understand the findings.
  • Maintain personal certification and training records and act on expiry notifications.
  • Communicate findings professionally to the Foreperson, Superintendent, and QA/QC leadership; support and accept work direction from Inspector II and Inspector III colleagues.
  • Participate in ACCO safety programs and demonstrate commitment to a goal of zero injuries or incidents.
  • Identify and document nonconforming material, workmanship, or documentation and bring it to the assigned Inspector III.
  • Hold the specific work being inspected and require that it not proceed past an inspection point until inspection is performed.
  • Reject receiving material that does not match the submittal, specification, or required documentation.
  • Stop work and immediately notify the Inspector III and Project Manager when work in progress presents an immediate quality or safety risk.
  • Perform other duties assigned by QA/QC leadership in conjunction with the project team.

Benefits

  • Potential $2,000 sign-on bonus for Inspector I, paid after six months of employment if role expectations are met.
  • Annual pay rate reviews and increases.
  • Discretionary performance bonuses following regular performance evaluations.
  • Relocation packages for qualified roles.
  • Competitive per diem allowances for project-based roles to support housing needs.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service