QA/QC Inspector I

ACCO Engineered Systems•Sparks, NV

About The Position

The QA/QC Inspector I performs visual inspection and verification of materials, equipment, piping systems, and welding and brazing installation work on assigned projects and in fabrication shops. The inspector records inspection results as objective evidence and works to project specifications, applicable ASME piping codes, manufacturer requirements, customer site requirements, and ACCO’s welding program. This is an entry-level inspection position that performs inspections within its scope and maintains complete, retrievable records according to an inspection plan established by QA/QC leadership or an assigned Inspector III. The role does not write the inspection plan. Daily technical direction comes from an assigned Inspector II or III, or from the next QA/QC manager in line when neither is assigned. The position supports fabrication, installation, and project management as part of the project team. It coordinates day-to-day site activities with local project leadership while inspection decisions and quality records follow the QA/QC reporting line. The inspector is expected to identify issues early, raise findings for resolution, and inspect work before it is covered. The role may work at project sites, fabrication facilities, regional branch offices, or the primary office; location varies by assignment, and overnight travel may be required. The position has authority to hold specific work at an inspection point, reject nonconforming material at receiving, and stop and report work presenting an immediate quality or safety risk. Nonconforming conditions must be documented and brought to the assigned Inspector III; nonconformance report issuance and disposition are decided by the QA/QC Area Supervisor or above jointly with the Project Team. The position does not qualify welders or brazers, approve or issue welding procedures, serve as the Certified Welding Inspector of record, approve repairs or design/procedure changes, issue or disposition nonconformance reports, or sign turnover documentation or final quality letters. This is a non-exempt position. Hours and shifts follow area project requirements and applicable law. Overtime, shift work, and weekend coverage may occur based on the project schedule and are compensated under company policy and applicable law. Work time, including travel between sites during the workday, must be recorded accurately. The stated wage range is $29.98–$38.79 per hour, with actual compensation determined by candidate- and location-specific factors.

Requirements

  • At least three years of experience in construction or fabrication quality control.
  • One to two years of experience on semiconductor, high-purity, cleanroom, data center, or comparable technically demanding projects, such as cleanroom piping, process utilities, tool hook-ups, or chemical and gas systems.
  • Current ASNT or ACCP VT Level I or Level II certification, at the level required by assigned duties and project requirements, meeting the ACCO Standard Written Practice and examination requirements and approved by the ACCO ASNT Level III.
  • Annual Jaeger J1 near-vision examination.
  • Ability to read and interpret isometrics, P&IDs, shop drawings, specifications, and inspection reports.
  • Working knowledge of weld and braze visual acceptance criteria, mechanical piping systems, and high-purity cleanliness and workmanship standards.
  • Ability to write clear, factual inspection reports.
  • Regular and routine attendance.
  • Valid driver’s license and reliable transportation to assigned project sites.
  • Ability to meet the role’s physical demands, including frequent lifting or moving up to 10 pounds, occasional lifting or moving up to 25 pounds, vision requirements, and walking, climbing stairs, sitting, stooping, kneeling, crouching, or crawling.
  • Ability to access active construction sites and fabrication shops, including elevated work areas and confined spaces, using required fall protection and personal protective equipment.

Nice To Haves

  • Familiarity with PT, MT, UT, and RT sufficient to read a third-party examination report and understand what was examined, the applicable criteria, and the result; certification to perform these methods is not required.
  • OSHA 10 or OSHA 30 training.
  • Confined-space training.
  • First aid and CPR training.
  • Experience with Box, Bluebeam, Smartsheet, Procore, or PlanGrid.
  • Conversational Spanish.

Responsibilities

  • Perform visual examinations of welded, brazed, soldered, and mechanical joints, including grooved couplings, press fittings, flanges, and threaded connections.
  • Inspect pipe fit-up, alignment, joint preparation, cleanliness, supports and hangers, and general workmanship.
  • Inspect received materials and equipment against submittals, packing lists, and required documentation.
  • Perform in-process and final visual inspections of high-purity process piping, clean utilities, chemical and gas systems, hydronic systems, and HVAC mechanical systems.
  • Attend scheduled hold and witness points and participate in pressure tests, system walkdowns, punch-list inspections, and pre-turnover verification.
  • Verify compliance with project specifications, customer site requirements, applicable ASME and AWS codes, manufacturer requirements, and ACCO procedures.
  • Verify that welding procedure specifications are approved and applicable and that welder qualifications and continuity are current for the process in use.
  • Verify material traceability, including heat numbers, material test reports, and lot identification, and verify that measuring and test equipment is within its calibration period.
  • Submit a daily inspection report with photographs for every project day worked and file it to the project QA/QC folder the same day.
  • Complete inspection records, weld maps, fit-up logs, brazing logs, torque logs, and visual inspection records legibly and contemporaneously with the work.
  • Document nonconforming conditions with sufficient description, location, and photographic evidence for someone not present to understand the finding.
  • Keep personal certification and training records current and act on expiry notifications.
  • Communicate findings professionally to the Foreperson, Superintendent, and QA/QC leadership; support assigned Inspectors II and III and accept their work direction.
  • Participate in ACCO safety programs and demonstrate commitment to the goal of zero injuries or incidents.
  • Identify and document nonconforming material, workmanship, or documentation and bring it to the assigned Inspector III.
  • Hold the specific work being inspected and prevent it from proceeding past an inspection point until inspection is performed; reject receiving material that does not match requirements.
  • Stop work and immediately notify the Inspector III and Project Manager when work in progress presents an immediate quality or safety risk.
  • Coordinate day-to-day work with local project leadership and perform other duties assigned by QA/QC leadership in conjunction with the project team.

Benefits

  • Potential $2,000 sign-on bonus for Inspector I, paid after six months of employment if role expectations are met.
  • Annual pay-rate reviews and increases.
  • Discretionary performance bonuses.
  • Relocation packages for qualified roles.
  • Competitive per diem allowances for project-based roles to support housing needs.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service