Punch Press Operator

ABB•Saint Louis, MO
•Onsite

About The Position

ABB is hiring a Punch Press Operator for its NEMA Motors Division. This onsite, second-shift role operates punch press equipment and supports safe, accurate production. The operator must be able to perform the essential functions for at least 8 hours per day, 5 days per week, following ABB safety policies and using required personal protective equipment. ABB will discuss reasonable accommodations when needed. The operator verifies press safety devices and job documentation, checks that parts and materials match the work order, and inspects parts for defects and required features. The role includes preparing and feeding material through the straightener and feeder, keeping the strip lubricated, monitoring equipment and scrap flow, and maintaining an organized work area. Operators also manage containers and packaging, rotate tasks with a partner, complete job documentation, and properly shut down equipment and handle nonconforming material at the end of a run. The position reports to Rob Snider, Production Supervisor (2nd Shift). The role is onsite and pays $21.89–$27.92 per hour, with a shift premium for second and third shifts.

Requirements

  • Be able to perform the essential job functions for a minimum of 8 hours per day, 5 days per week.
  • Follow ABB safety policies and PPE rules, including use of safety glasses, hearing protection, safety shoes, cut-resistant gloves, and sleeves.
  • Be able to lift, carry, and handle up to 50 pounds.
  • Be able to stand for long periods and reach, grip, push, pull, and bend.
  • Complete training on all job steps, the electric pallet truck, press controls, and the Emergency Stops for the press operated.
  • Check that Emergency Stops and light curtains work properly before running.
  • Inspect a part before running continuously and check flatness three times per coil (back-to-back).

Responsibilities

  • Follow ABB safety policies and PPE requirements; verify safety hand restraints and press controls, and check Emergency Stops and light curtains each shift.
  • Confirm job assignments and review the assignment sheet, process sheet, print, clipboard, container tags, and part numbers before running a job.
  • Verify that the Press Release Form (QFSL-A001) is present and supervisor-signed, and that inventory tags, coil numbers, blueprints, and work orders match.
  • Inspect parts for damage, burrs, chips, slug marks, bent teeth, missing features, and other specified conditions; gauge parts when required by Work Instructions.
  • Feed material through the straightener and feeder to the die starting point, inch it through slowly, maintain lubrication, and monitor the loop between presses and the scrap conveyor.
  • Use proper tools and keep the die area clear; dispose of scrap as instructed and follow the Die Setter's lubrication requirements.
  • Manage full containers and follow the process sheet or instructions for packaging final-process shipments.
  • Operate the electric pallet truck only after training.
  • Rotate tasks with a partner, usually after lunch; clean the press area before rotating and at the end of the shift.
  • Complete the operator section of QFSP-0004 for each job.
  • Use an air wire twister to wire lamination stacks.
  • At the end of a run, shut down the press, dereeler, straightener, and feeder; remove the end-coil strip and send it to the Tool Room with the die; wipe oil from the die and clean the area.
  • Complete a Red Tag for all nonconforming material and move it to the Non Con area.
  • Report injuries, accidents, and near misses to the Supervisor immediately.

Benefits

  • Choice of two medical plan options: PPO Copay Plan or High Deductible Plan with a Health Savings Account.
  • Choice of two dental plan options: Core and Core Plus.
  • Vision benefit.
  • Company-paid life insurance equal to 2 times base pay.
  • Company-paid accidental death and dismemberment insurance equal to 1 times base pay.
  • Voluntary life and AD&D coverage, employee-paid.
  • Company-paid short-term disability for up to 26 weeks.
  • Company-paid long-term disability at 60% of pay, with an option to increase coverage to 66 2/3% of pay.
  • Supplemental employee-paid benefits, including accident insurance, hospital indemnity, critical illness, and pet insurance.
  • Paid parental leave.
  • Employee Assistance Program.
  • Health Advocate support for mental and behavioral health, health navigation, virtual health, and infertility and adoption resources.
  • Employee discount program.
  • 401(k) Savings Plan with company contributions.
  • Employee Stock Acquisition Plan (ESAP).
  • 11 paid holidays.
  • Vacation based on years of service for hourly and non-exempt positions.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service