Pipe Welder/Fabricator
About The Position
This role involves various levels of pipe welding and fabrication, focusing on Victaulic standard and engineered products. The position requires proficiency in different welding processes (GMAW-P, GTAW, RMD) and adherence to ASME standards. Responsibilities range from machine setup and basic welding to advanced fabrication, rigging, crane operation, and mentoring. Level 1 focuses on Victaulic Standard Parts, including setup, upkeep, and welding certifications for various pipe materials and configurations. It also requires understanding shop drawings, weld symbols, and measurement devices. Level 2 builds upon Level 1 with additional certifications for different welding positions and processes, proficiency in rigging and crane operation, and welding of smaller and larger diameter Victaulic standard parts. Level 3 encompasses all Level 2 requirements and adds the ability to balance welding production, perform duties of a Level 1 Structural Welder, assist in trialing new part weldability, mentor junior welders, and possess advanced troubleshooting knowledge.
Requirements
- Certification to weld A53 pipe in 1G-R position using the GMAW-P process in accordance with ASME Sec. IX.
- Certification to weld A312 pipe in 1G-R position using the GMAW-P process in accordance with ASME Sec. IX.
- Certification to weld A53 O-Lets using the GTAW process for root and using the GMAW-P process on cap in accordance with ASME Sec. IX.
- Pass Visual test for SCH. 10 & 40 TEE Fittings in a 1G-R position using the GMAW-P Process.
- Pass a configuration / fitup test which includes an O-Lets and flange configured part.
- Proficient understanding of Victaulic ES1124 weld standard.
- Proficient understanding of part configurations via shop drawing.
- Proficient understanding of Victaulic weld symbols.
- Proficient understanding of measurement devices.
- Proficiently configure Victaulic standard parts 4” – 12” in diameter at any length.
- Proficiently weld Victaulic standard parts 4” - 12” in diameter at any length.
- Certification to weld A53 pipe in 2G position using the RMD & GMAW-P processes in accordance with ASME Sec. IX.
- Certification to weld A312 pipe in 2G position using the RMD & GMAW-P processes in accordance with ASME Sec. IX.
- Proficient Rigging & Crane operation for non-standard, long, and large parts.
- Proficiently weld Victaulic standard parts < 3” in diameter at any length.
- Proficiently weld Victaulic standard parts 12” + in diameter at any length.
- Perform the duties of a Level 1 Structural Welder.
- Advanced knowledge on troubleshooting procedures.
Nice To Haves
- Assist Welding Robot Operators with Fitup of Full Flow & Flange parts when required.
- Assist Welding Robot Operators with basic Weld Robot Operation when required.
- Balance welding related production where required.
- Assist in trialing new part weldability and feasibility.
- Assist in mentoring less skilled welders with best practices.
Responsibilities
- Consistently demonstrate proper machine / positioner setup & upkeep procedures.
- Certification to weld A53 pipe in 1G-R position using the GMAW-P process in accordance with ASME Sec. IX.
- Certification to weld A312 pipe in 1G-R position using the GMAW-P process in accordance with ASME Sec. IX.
- Certification to weld A53 O-Lets using the GTAW process for root and using the GMAW-P process on cap in accordance with ASME Sec. IX.
- Pass Visual test for SCH. 10 & 40 TEE Fittings in a 1G-R position using the GMAW-P Process.
- Pass a configuration / fitup test which includes an O-Lets and flange configured part.
- Proficient understanding of Victaulic ES1124 weld standard.
- Proficient understanding of part configurations via shop drawing.
- Proficient understanding of Victaulic weld symbols.
- Proficient understanding of measurement devices.
- Proficiently configure Victaulic standard parts 4” – 12” in diameter at any length.
- Proficiently weld Victaulic standard parts 4” - 12” in diameter at any length.
- Assist Welding Robot Operators with Fitup of Full Flow & Flange parts when required.
- Assist Welding Robot Operators with basic Weld Robot Operation when required.
- Certification to weld A53 pipe in 2G position using the RMD & GMAW-P processes in accordance with ASME Sec. IX.
- Certification to weld A312 pipe in 2G position using the RMD & GMAW-P processes in accordance with ASME Sec. IX.
- Proficient Rigging & Crane operation for non-standard, long, and large parts.
- Proficiently weld Victaulic standard parts < 3” in diameter at any length.
- Proficiently weld Victaulic standard parts 12” + in diameter at any length.
- Balance welding related production where required.
- Perform the duties of a Level 1 Structural Welder.
- Assist in trialing new part weldability and feasibility.
- Assist in mentoring less skilled welders with best practices.
- Advanced knowledge on troubleshooting procedures.
Stand Out From the Crowd
Upload your resume and get instant feedback on how well it matches this job.
What This Job Offers
Career Level
Entry Level
Education Level
No Education Listed
