OT/IT Network Engineer (Transportation)

Leidos•McLean, VA
•$73,450 - $132,775•Onsite

About The Position

Leidos is seeking a hands-on OT/IT Network Engineer to join the Saxton Lab Team, which operates the Federal Highway Administration’s Saxton Transportation Operations Laboratory (STOL), a USDOT research and development center for connected and automated vehicle technologies and digital roadway infrastructure. The lab advances transportation safety, mobility, and environmental outcomes through innovation, testing, and real-world demonstrations involving V2V, V2I, V2X, and cooperative driving automation. The engineer will own STOL’s network and connected-vehicle testbed infrastructure, designing, administering, securing, documenting, and troubleshooting networks that connect lab systems, field sites, roadside infrastructure, edge platforms, and connected-vehicle devices. The position is primarily focused on network engineering and administration, with approximately 60% of time on network and testbed infrastructure, 20% on network security and ATO/RMF documentation and vulnerability remediation, and 20% on connected-vehicle testbed operations and experiment support. The role sits within the lab’s Operations team and works across a matrix organization with researchers and project engineers to support testing campaigns and demonstrations. The engineer will also contribute to the network’s federal security authorization posture, including ATO/RMF artifacts, POA&Ms, and vulnerability remediation, in partnership with cybersecurity and Corporate Information Security teams. The position is full-time at the customer site in McLean, Virginia. Candidates must have been located in the United States for the three consecutive years preceding application, be eligible for a Public Trust Clearance, and possess a valid driver’s license.

Requirements

  • Bachelor’s degree in network engineering, Information Technology, Electrical/Computer Engineering, Computer Science, or a related technical field and 4–8 years of relevant experience; or a technical associate’s degree and 7+ years of experience. Equivalent demonstrated experience may be considered instead of a degree.
  • At least 4 years of hands-on experience designing, configuring, administering, and troubleshooting OT, industrial, laboratory/testbed, or field-deployed networks.
  • Strong knowledge of TCP/IP, switching, routing, VLANs, subnetting, ACLs, NAT, VPNs, firewalls, and network segmentation.
  • Knowledge of fiber/copper infrastructure, network diagrams, IP addressing, DNS/DHCP, and time synchronization technologies, including NTP, PTP/IEEE 1588, and GPS.
  • Comfort administering Linux-based devices and using Linux for troubleshooting and basic scripting.
  • Working knowledge of network security, vulnerability remediation, and secure network architecture.
  • Familiarity with federal ATO/RMF processes, NIST SP 800-53/800-82, security plans, POA&Ms, and maintaining technical authorization documentation.
  • Strong written and verbal communication skills and the ability to maintain clear, accurate technical documentation.
  • Strong organizational skills and the ability to manage competing operational, security, and research priorities.
  • Ability to work hands-on in laboratory, garage, vehicle, and field environments, including lifting up to 50 pounds.
  • Availability for occasional off-hours support for testing, maintenance, or demonstrations.
  • Must have been located in the United States for the current three consecutive years and be eligible for a Public Trust Clearance.
  • Must possess a valid driver’s license.

Nice To Haves

  • CCNA, CCNP, or equivalent networking experience.
  • Security+ or equivalent cybersecurity knowledge.
  • Experience with Cisco, Juniper, Aruba, Fortinet, Palo Alto, or similar networking platforms.
  • Experience with C-V2X PC5/Uu, 5G NR, SAE J2735/J3161, or connected-vehicle technologies.
  • Hands-on experience with Roadside Units (RSUs) and Onboard Units (OBUs) from vendors such as Yunex, Cohda Wireless, Commsignia, Kapsch, or Ettifos.
  • Familiarity with PKI/SCMS credentialing and OT/ICS security concepts.
  • Experience supporting federally funded R&D, government laboratories, or government contracting.

Responsibilities

  • Design, configure, administer, and troubleshoot switches, routers, firewalls, wireless infrastructure, VPNs, and remote-site connectivity.
  • Manage Layer 2 and Layer 3 networking, including VLANs, routing, subnetting, ACLs, NAT, segmentation, and IP addressing.
  • Administer DNS, DHCP, NTP, PTP/IEEE 1588, GPS timing, and remote connectivity services.
  • Monitor network health, availability, latency, and performance, and troubleshoot using Wireshark/tcpdump, SNMP, syslog, and packet captures.
  • Maintain network configurations, backups, firmware, certificates, device inventories, IP plans, port maps, and network diagrams.
  • Install and troubleshoot fiber and copper infrastructure and support connectivity to field-deployed RSUs, edge nodes, traffic systems, and remote sites.
  • Plan and execute network changes, upgrades, and equipment replacements using established change-control practices.
  • Operate and maintain STOL’s Smart Garage and connected-vehicle testbeds, including RSUs, OBUs, signal controllers, edge platforms, and network-connected research equipment.
  • Configure and troubleshoot C-V2X PC5/Uu, 5G NR, Wi-Fi, Ethernet, fiber, and cellular/backhaul connectivity.
  • Translate research requirements into network and testbed configurations and maintain environments in known, repeatable states.
  • Support laboratory experiments, field testing, demonstrations, and troubleshooting across network, device, timing, protocol, and application layers.
  • Maintain the network’s security posture and documentation for ATO and ongoing RMF activities.
  • Develop and update security/network architecture and boundary diagrams, data-flow diagrams, inventories, and other authorization artifacts.
  • Develop, maintain, and track network-related POA&Ms, coordinating remediation and evidence collection for closure.
  • Review vulnerability findings affecting operating systems, network infrastructure, and edge infrastructure, and implement or coordinate remediation through patches, firmware upgrades, configuration changes, or compensating controls.
  • Implement network security controls, including segmentation, firewall/ACL policies, VPNs, secure administrative access, and IT/OT boundary protections.
  • Partner with cybersecurity, ISSO/ISSM, and program personnel on assessments, continuous monitoring, and applicable NIST SP 800-53/800-82 requirements.
  • Support concurrent R&D projects, laboratory demonstrations, field deployments, and high-visibility stakeholder events.
  • Apply appropriate safety practices when working with network equipment, RF systems, vehicles, cabling, and roadside infrastructure.
  • Uphold the lab’s safety posture during routine operations, testing, and special events, and partner with facilities on power, environmental controls, and cable management.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service