Material Prep - Stile Manager

Owens Corning • Tega Cay, SC

6d • Onsite

About The Position

This role is responsible for preparing components for the layup line to build. The Material Prep - Stile Manager will read and interpret schedules, pull accurate materials and door skins, and manage material locations. They will read tickets and schedules to determine correct materials, count and stack skins in the correct orientation and order. The position involves using a conveyor belt to load components onto carts for the layup lines and unloading components as per tickets. Responsibilities include adding and rejecting cull boards, inspecting and recording reject skins, returning skins to the correct location, and moving cull boards by pushing a cart. The role also requires recording specific information on each stack of skins and identifying special cut skins. This involves measuring and setting up skins to cut to specific widths and lengths based on chart specifications, knowing all skin SKUs, and being able to handle multiple skins at once. Accuracy is crucial, requiring the use of a tape measure to the 32nd of an inch, validating skin accuracy before and after cuts, performing quality inspections, and pre-flipping skins in the proper orientation with the correct count and in schedule order. Other duties may be assigned by the leadership team.

Requirements

• Knowledge of all skin species, attention to detail in identifying skin defects, quality specs, pass/no pass parameters, read/interpret tickets/schedules and read a tape measure.
• Advanced knowledge of SKU's, material cut requirements, and coordinating material flow to/off skin lines.
• Knowledge of procedures, order tracking process and documents, door types, use of tape measure.
• pull requirements for materials/doors from main warehouse, knowledge of table saw operation.
• Excellent memory recall.
• Must have a high attention to detail.
• Must be mechanically inclined and have good math and measurement skills.
• Detailed orientated and ability to follow instructions on the tickets.
• Follow specifications and work instructions precisely.

Responsibilities

• Reads/interprets schedules, pulls accurate materials/door skins, knowledge of material locations.
• Read tickets/schedules to determine correct materials, counts /stacks skins onto cull board in correct orientation and in order of the schedule.
• Read the tickets and use a conveyor belt to load the components onto the cart to take them to the layup lines.
• Unload components via the ticket.
• Adds the correct amount of cull boards, reject bad cull boards, inspect and record reject skins, inspect and return skins to correct location and moves cull boards via pushing a cart.
• Records schedule # line # stack # date and initials on each stack of skins, flip over the top skin on skin stacks to be restocked.
• Highlight/identify special cut skins on printed schedule, measure and set-up skins to cut to width and length based on chart specifications, must know all skin SKU’s, be able to hold and cut up to 10+ skins at a time.
• Uses tape measure use to 32th of an inch, validates accuracy of skins before/after cuts, complete quality inspection and preflipping skins in proper orientation, correct count, and in order of the schedule.
• Other duties as assigned by leadership team.

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level
• Education Level: No Education Listed