Finisher - 3rd Shift - Sun - Thurs 10pm - 6:30am

Fenner Precision Polymers•Lancaster, PA

1d•Onsite

About The Position

This position involves various levels of finishing work, from basic operation and quality checks to complex problem-solving and training. The role requires attention to detail, the ability to use measuring tools and perform mathematical calculations, and a commitment to quality and safety standards. As a Finisher progresses through levels 1, 2, and 3, responsibilities increase to include more complex tasks, troubleshooting, training peers, and potentially acting as a quality inspector.

Requirements

Able to operate all welder styles and independently make adjustments to equipment for the proper weld.
Able to follow the standard table setup process and identify adjustments to the setup based on the type of product being finished.
Capable of using a measuring tape, and able to use math with fractions, decimals, and multiplication/addition.
Maintains quality standards by reviewing product appearance and appropriate specifications.
Utilizes tape measure to ensure width & length specifications are met.
Able to correctly identify an unacceptable weld and make adjustments.
Able to identify visual defects and adjust belt tension to correct.
Performs quality checks and records quality information on the work order.
Follows appropriate work instructions; reporting quality problems to engineering and supervision.
Able to properly shear, inspect, and weld balanced weave jobs & other common high-runners without support.
Able to consistently meet throughput expectations.
Supports the department by performing other tasks of equal to or lesser job grades as required.
Able to diagnose problems and follow work instructions with limited supervision.
Willingly supports the team in all efforts towards continuous improvement.
Always Promote Fenner Precision Polymers values and behaviors.
Able to complete all of Level 1 Finisher responsibilities.
Mastery of a large variety of Product Finishing Requirements, including: Jobs that require adding custom attachments (flights, chain, side plates, etc.), Jobs that require squaring & utilization of secondary tooling to complete (drills, jigs), Jobs that require very tight, small welds (up to 84 count) or plasma cutting.
Meets and occasionally exceeds throughput expectations.
Demonstrates the ability to troubleshoot and solve technical problems impacting product quality without supervision across the majority of products.
Willing to train Level 1 & 2 Finishers as required.
May be established as a Finishing Inspector.
Responsible for signing off on product quality for peers.
Embraces flexibility within daily responsibilities and is willing to support however needed most.
Proactively offers ideas to drive continuous improvement.
Able to complete all of Level 1 & 2 Operator responsibilities.
Has been established as a Finishing Inspector.
Responsible for signing off on product quality for peers.
Takes initiative to support and help guide peers with a mistake that has or could impact quality.
Has established themselves a go-to resource in questions of product quality & problem solving.
Mastery of Finishing virtually every product made within the shop.
Able to complete jobs with extremely tight specs (more than 84 count).
Consistently exceeds throughput expectations.
Demonstrates the ability to troubleshoot and solve virtually all technical & complex problems without supervision.
Takes initiative to train others across all products and willingly supports others when they face difficulties – is a designated trainer.
Leads by example in willingness to be flexible and support the business however needed with a positive attitude.
Demonstrates leadership in providing ideas to drive continuous improvement.
High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.
Learn and follow EHS policies, rules and work instructions.
Attend required EHS training.
Wear the required PPE at all times.
Take personal responsibility for keeping yourself and your co-workers and visitors free from injury by participating in and/or conducting risk assessments, work place inspections, corrective actions and safety observations.
Report incidents, near miss, unsafe conditions, unsafe acts and other hazards in the work place.
STOP WORK when imminent danger is present.
Maintain work area in a neat and orderly fashion and keep equipment in proper working condition.

Responsibilities

Operate all welder styles and independently make adjustments to equipment for the proper weld.
Follow the standard table setup process and identify adjustments to the setup based on the type of product being finished.
Use a measuring tape, and able to use math with fractions, decimals, and multiplication/addition.
Maintain quality standards by reviewing product appearance and appropriate specifications.
Utilize tape measure to ensure width & length specifications are met.
Correctly identify an unacceptable weld and make adjustments.
Identify visual defects and adjust belt tension to correct.
Perform quality checks and record quality information on the work order.
Follow appropriate work instructions; reporting quality problems to engineering and supervision.
Properly shear, inspect, and weld balanced weave jobs & other common high-runners without support.
Consistently meet throughput expectations.
Support the department by performing other tasks of equal to or lesser job grades as required.
Diagnose problems and follow work instructions with limited supervision.
Willingly support the team in all efforts towards continuous improvement.
Promote Fenner Precision Polymers values and behaviors.
Complete all of Level 1 Finisher responsibilities (for Level 2).
Mastery of a large variety of Product Finishing Requirements, including: Jobs that require adding custom attachments (flights, chain, side plates, etc.), Jobs that require squaring & utilization of secondary tooling to complete (drills, jigs), Jobs that require very tight, small welds (up to 84 count) or plasma cutting (for Level 2).
Meet and occasionally exceed throughput expectations (for Level 2).
Demonstrate the ability to troubleshoot and solve technical problems impacting product quality without supervision across the majority of products (for Level 2).
Willing to train Level 1 & 2 Finishers as required (for Level 2).
May be established as a Finishing Inspector (for Level 2).
Responsible for signing off on product quality for peers (for Level 2 & 3).
Embrace flexibility within daily responsibilities and is willing to support however needed most (for Level 2).
Proactively offer ideas to drive continuous improvement (for Level 2).
Complete all of Level 1 & 2 Operator responsibilities (for Level 3).
Has been established as a Finishing Inspector (for Level 3).
Take initiative to support and help guide peers with a mistake that has or could impact quality (for Level 3).
Has established themselves a go-to resource in questions of product quality & problem solving (for Level 3).
Mastery of Finishing virtually every product made within the shop (for Level 3).
Complete jobs with extremely tight specs (more than 84 count) (for Level 3).
Consistently exceed throughput expectations (for Level 3).
Demonstrate the ability to troubleshoot and solve virtually all technical & complex problems without supervision (for Level 3).
Take initiative to train others across all products and willingly support others when they face difficulties – is a designated trainer (for Level 3).
Lead by example in willingness to be flexible and support the business however needed with a positive attitude (for Level 3).
Demonstrate leadership in providing ideas to drive continuous improvement (for Level 3).
Learn and follow EHS policies, rules and work instructions.
Attend required EHS training.
Wear the required PPE at all times.
Take personal responsibility for keeping yourself and your co-workers and visitors free from injury by participating in and/or conducting risk assessments, work place inspections, corrective actions and safety observations.
Report incidents, near miss, unsafe conditions, unsafe acts and other hazards in the work place.
STOP WORK when imminent danger is present.
Maintain work area in a neat and orderly fashion and keep equipment in proper working condition.