Electrical Test Technician LV 1

Intermountain Electronics•Price, UT
•Onsite

About The Position

Intermountain Electronics (IE) designs, manufactures, automates, and tests custom-engineered power distribution equipment and critical power and process infrastructure for industrial, mission-critical, oil and gas, and mining markets. The Electrical Test Technician executes testing and commissioning procedures on integrated power products, verifies assemblies against schematics and specifications, controls equipment energization in the test bay, diagnoses electrical failures, and documents results to IE and customer acceptance criteria. The role reports directly to the PDU Production Manager and is based at the Helper, Utah facility, on a weekday day schedule with every other Friday off. The technician performs factory acceptance and inspection procedures, pre-energization checks, protective-device and control-circuit tests, load-bank and transfer testing, and PLC and monitoring-system I/O verification. The role also controls safe work around energized equipment, including lockout/tagout, hazard boundaries, PPE, safety briefings, and stop-work decisions. It assists with troubleshooting, performs in-scope repairs and retesting, supports customer witness testing and vendor commissioning, and prepares complete, accurate test documentation. The technician coordinates with production, quality, engineering, project management, customers, and third parties, and provides hands-on direction to Electrical Test Assistants. The position requires a currently registered electrical apprentice in the fourth year or higher, or a licensed Journeyman electrician. Prior electrical test or commissioning experience is not required. Candidates must be able to work a 40-hour week and additional time as required. Employment is conditional on successful completion of a background check and drug screen, subject to applicable laws and regulations.

Requirements

  • Currently registered electrical apprentice in the fourth year or higher, or licensed Journeyman electrician.
  • No prior electrical test or commissioning experience is required.
  • Ability to read, interpret, and understand electrical schematics, drawings, and specification charts and apply them to project setup and final products.
  • Ability to read and understand production reports related to quality and quantity, write nonconformance reports, and comply with safety rules.
  • Ability to communicate effectively and establish productive working relationships with coworkers, supervisors, customers, and staff.
  • Ability to perform electrical calculations involving ohms, resistance, voltage, and fusing capacity; follow schematics and wire-match accurately.
  • Ability to understand company operating, production, and overrun costs and apply fractions, percentages, ratios, and proportions to practical situations.
  • Ability to analyze project plans and specifications, resolve practical problems, and interpret written, oral, diagrammatic, or scheduled instructions.
  • Ability to use a computer to log time and job hours.
  • NFPA 70E Certificate.
  • For individuals in Colorado or Utah pursuing a Journeyman license through a state authority, maintain a valid apprentice license to receive signed hours toward that requirement.
  • Valid OSHA forklift and Overhead Crane certification, or ability to obtain them.
  • Ability to work a 40-hour work week and additional time as required.
  • Successful completion of a background check and drug screen, subject to applicable laws and regulations.

Responsibilities

  • Execute assigned factory acceptance test (FAT) and inspection and test plan (ITP) procedures on IE-manufactured equipment, working under a Technician 2 or above on complex and first-of-kind sequences.
  • Perform pre-energization checks, including insulation resistance, dielectric withstand, contact and winding resistance, continuity, point-to-point wire matching, CT/PT checks, phase rotation, phasing, and grounding and bonding continuity.
  • Test protective devices and control circuits, verify settings against approved settings sheets, and perform relay secondary injection under the direction of a Technician 2 or above.
  • Control energization and de-energization of equipment in the test bay, and apply test power for OEM and subcontractor commissioning after verifying source voltage, phase rotation, and capacity.
  • Operate load banks according to assigned test sequences, monitor and record results, and direct Electrical Test Assistants in cable handling and connection.
  • Execute transfer and failure-mode testing and record transfer times and system responses.
  • Verify PLC and control-system I/O, indications, alarms, metering accuracy, and remote monitoring points.
  • Execute lockout/tagout for multi-source assemblies; verify absence of voltage, discharge stored energy, and apply protective grounds before contact.
  • Select and wear appropriate arc-flash and shock PPE; establish and maintain approach and arc-flash boundaries, barricades, signage, and controlled access.
  • Participate in and lead routine pre-test safety briefings within own scope; enforce IE safety requirements for customers and third parties; exercise stop-work authority when needed.
  • Maintain a clean, controlled test area and promptly report near misses, incidents, and equipment damage.
  • Assist in diagnosing test failures, distinguish among potential causes, and escalate marginal, disputed, or out-of-scope conditions to a Technician 2 or above or the appropriate owner.
  • Perform corrective repairs, re-terminations, and settings changes within own scope, then retest and document the correction.
  • Use test and diagnostic equipment to characterize power quality, load imbalance, hot connections, and intermittent conditions; submit drawing redlines through proper channels.
  • Support customer and engineer witness testing and answer technical questions within scope.
  • Control power for OEM commissioning of vendor-supplied equipment, host and escort third-party personnel, coordinate access and resources, and witness and record third-party results affecting IE scope.
  • Complete test records accurately at the time of testing, record progress in CxAlloy, and write nonconformance reports for failed or out-of-tolerance conditions.
  • Verify assemblies against job travelers, bills of materials, approved submittals, and torque sheets; restore equipment to shipping configuration after testing.
  • Assemble and turn over complete test packages, close punch-list items within own scope, and verify instruments are within calibration and calibration information is recorded.
  • Log time and job hours accurately, flag conditions affecting test hours or ship schedules, and coordinate test readiness with assembly, quality, engineering, and project management.
  • Provide hands-on direction to Electrical Test Assistants and verify their work before results are recorded.
  • Maintain regular attendance, comply with IE Core Values and safety programs, and keep a safe and clean work area while following OSHA arc-flash safety requirements and wearing appropriate PPE.

Benefits

  • Paid time off (PTO)
  • 10 paid holidays
  • Medical and dental plans
  • 24/7/365 access to U.S. board-certified doctors through Teladoc
  • Employee Assistance Program
  • Company-paid life insurance
  • Supplemental vision, life, short-term disability, and long-term disability insurance
  • 401(k) with company match up to 6% of base salary
  • Health Savings Account (HSA) with available company match up to $2,000 based on family size
  • Paid parental leave
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service