Differential Disassembly

JASPER Engines & Transmissions•Jasper, IN

3d•Onsite

About The Position

This position involves the operation of basic hand tools such as hammers, impact tools, drills, screwdrivers, pliers, wrenches, picks, scrap scrapers, pullers, drivers, and punches, as well as arbor and hydraulic presses. The Disassembly Associate will also use an overhead hoist to load core units onto their bench. Responsibilities include operating a Pass-through Washer, Pressure Washer, and Soda Blaster. The Associate will verify the core matches the Bill of Materials (BOM) on the unit's tag. The unit will then be moved to the disassembly bench to remove external parts like the encoder motor, cables, and seals. Following this, the bolts connecting the case halves will be removed using a pneumatic impact and possibly a pry bar. Internal parts will be disassembled in the order dictated by Work Instructions, taking care not to damage parts. Once internal parts are removed, they are sorted into a wash basket, which is then loaded into the pass-through washer. While parts are washing, the Associate will pressure wash and soda blast parts from the previous unit. Once parts are cleaned to the standard, the Associate will begin the process again on the next core unit.

Requirements

Ability to lift, bend, push, pull, and move materials up to 50lbs.
Ability to stand or walk from 8 to 10 hours per day, 5 to 6 days per week.
Ability to use manual, battery-operated, and pneumatic handheld tools.
Ability to understand and operate with basic computer skills.
Ability to work in a loud environment where hearing protection is required at all times during production.
Ability to work in an environment that exposes the Associate to heat, oil, grease, chemicals, dust, etc.
Ability to work at a steady pace to meet production goals (Takt).

Responsibilities

Operate basic hand tools (hammer, impact, drill, screwdriver, pliers, wrenches, picks, scrappers, pullers, drivers, punches).
Operate arbor and hydraulic presses.
Use an overhead hoist to load core units.
Operate a Pass-through Washer, Pressure Washer, and Soda Blaster.
Verify core matches the BOM on the unit's tag.
Remove external parts (encoder motor, cables, seals, etc.).
Remove bolts connecting case halves using a pneumatic impact and possibly a pry bar.
Disassemble internal parts in the order dictated by Work Instructions.
Sort disassembled internal parts into a wash basket.
Load parts and case halves into the pass-through washer.
Pressure wash and soda blast cleaned parts.
Repeat the process on the next available core unit.