2nd shift Corrugator Utility

International Paper•Columbus, GA
•Onsite

About The Position

The Corrugator Utility supports corrugator operations at International Paper’s Columbus Box Plant. The role includes work across the double backer, stacker, and baler areas to prepare equipment and materials, assist operators, maintain production flow, handle waste, and complete required records and data entry. The position is hourly, full-time, and scheduled for the second shift, 3 p.m. to 11 p.m. The listed pay rate is $23.64 per hour. In the double backer role, the employee prepares paper and equipment, makes machine and glue-station adjustments, supports corrugator operation and quality checks, assists with setups and jam-ups, and organizes finished sheets. In the stacker role, the employee prepares and operates stackers, collects pull sheets, assists the knife person, and provides breaks. In the baler role, the employee operates waste-handling systems, processes and records waste and bales, maintains housekeeping, and completes a PIT checklist before driving PIT.

Responsibilities

  • Use startup procedures to ensure machine setup is performed correctly.
  • Check electrical power for the glue station, roll stands, stackers, and conveyor system as applicable.
  • Set dams, put starch into pans, make starch settings, and adjust equipment as needed.
  • Peel, load, shaft, align, and record paper; ensure the correct paper is on the correct roll stand.
  • Thread paper through the double backer splicer, bridge, and glue station with the operator’s assistance, and run the board to the slitter station.
  • Strip and load paper and prepare splicers.
  • Keep work areas clean and assist the operator as needed.
  • Unlock, check, clean, and start up both stackers; collect pull sheets for current orders and the next shift.
  • Assist the knife person in running board through the slitter and knife, help with setups, and provide breaks.
  • Complete the PIT checklist before driving PIT.
  • Operate balers and the cyclone for machine-center scrap systems, turning them on or off as required.
  • Use run procedures to ensure the machine is operated correctly.
  • Report to the corrugator 3 to 5 minutes before the shift begins and communicate with the preceding shift’s double backer about corrugator issues and run status.
  • Make bridge and tension settings and board-combination changes at the glue station.
  • Check board setup and quality; notify the operator about warp, loose liner, or paper alignment issues.
  • Assist with bookkeeping and corrugator operation to support continuous production.
  • Put good pull sheets under loads, mark loads with the factory order number and shift, and prepare load tags for sheet orders.
  • Apply tear tape, Ludox, or Michelman if needed and assist with corrugator setups and operation.
  • Place good sheets on WIP lines in an organized manner; operate stackers and help clear jam-ups to keep the dry end running.
  • Process waste brought to the baler from Corrugator, Converting, and Shipping.
  • Enter Wet End waste into the Kiwi Combined Waste Report.
  • Load the bale-waste railcar, empty roll-core carts into the trailer at Dock 12, and weigh and log all produced bales.
  • Maintain baler-room housekeeping each shift and ensure waste is removed from the Wet End, Shearer, and Dry End throughout the shift.
  • Complete appropriate data entry.

Benefits

  • Paid time off, including vacation and holidays
  • Retirement and pension
  • 401k matching program
  • Medical and dental coverage
  • Education and development, including tuition reimbursement
  • Life and disability insurance
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service