Avionics Technician I-III
About The Position
The Avionics Technician provides support to Company owned aircraft, including but not limited to OV-10 Bronco, IAR-823 Brasov, A-90 Raider, PC-9, and Bell 206LR helicopter. The information below is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that areุ required for this position. Duties, responsibilities and activities may change at any time with or without notice. Avionics Technician I-II Apply basic technical knowledge to perform simple or routine tasks following detailed instructions; Perform such tasks as replacing components, wiring circuits, repairing simple electronic equipment; Take test readings using common instruments, such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes; Apply technical knowledge of avionics systems in determining equipment malfunctions and expertise in restoring equipment condition and or operation; Work under close supervision, receiving technical guidance from supervisor or higher-level technician; Report to the Shift Lead/Maintenance Manager any safety issues/incidents/concerns as it happens; Ensures hangar and work areas are neat, clean, orderly and in accordance with Blue Air Instruction Vol 4.; Exercise knowledge of technical publications; Comply with company maintenance and logistics procedures and policies; Comply with FAA regulations as applicable; Know and understand the functions and requirements of computerized maintenance software; Perform other duties as assigned. Avionics Technician III Apply advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents; Determine the location and density of circuitry, evaluate electromagnetic radiation, isolate malfunctions, and incorporates engineering; Exercises understanding of the interrelationships of circuits; Exercise independent judgment in performing circuit analyses, calculating wave forms, and tracing relationships in signal flow; Uses complex test instruments, such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment; Provide technical guidance to lower level technicians; Report to the Shift Lead/Maintenance Manager any safety issues/incidents/concerns as it happens; Ensures hangar and work areas are neat, clean, orderly and in accordance with Blue Air Instruction Vol 4.; Exercise knowledge of technical publications; Comply with company maintenance and logistics procedures and policies; Comply with FAA regulations as applicable; Know and understand the functions and requirements of computerized maintenance software; Perform other duties as assigned.
Requirements
- Must be familiar with, able to read and understand wiring manuals, schematics, Company/Manufacturer, and Wire Diagram Manuals.
- Must be familiar with Garmin navigation.
- Must be familiar with FLIR systems.
- Must be able to wire and troubleshoot UFH/VHF radio systems.
- Must be a self-starter, able to work independently or part of a team.
- Must possess excellent communication and people skills, to include problem solving and organizational skills.
- Must be willing to travel.
- Must be willing to work nights and holidays.
- Must be able to lift fifty (50) pounds or more.
- Must be able to climb, stoop, bend, and crouch.
- Must be fluent in the English language with excellent communication skills.
- Must be able to obtain a Common Access Card (CAC) and must not be barred from any government installation.
- Avionics Technician I: Must have three (3) years avionics experience and be detail oriented.
- Avionics Technician I: Must be able to listen to hear and look to see.
- Avionics Technician I: Must demonstrate the knowledge, skills, and abilities of an Avionics Technician I in daily work performance.
- Avionics Technician II: Must have five (5) years avionics experience and be detail oriented.
- Avionics Technician II: Must be able to listen to hear and look to see.
- Avionics Technician II: Must demonstrate the knowledge, skills, and abilities of an Avionics Technician II in daily work performance.
- Avionics Technician III: Must have eight (8) years avionics experience and be detail oriented.
- Avionics Technician III: Must be able to stand, lift overhead, bend, crouch, climb a ladder, see to look, and hear the listen.
- Avionics Technician III: Must demonstrate the knowledge, skills, and abilities of an Avionics Technician III in daily work performance.
Nice To Haves
- Experience in a flight test instrumentation group involved in the designing, installing, gathering, and reducing flight test instrumentation data preferred.
- Airframe and Powerplant (A&P) certification a plus.
- An FCC repairman certificate is a bonus.
Responsibilities
- Apply basic technical knowledge to perform simple or routine tasks following detailed instructions
- Perform tasks such as replacing components, wiring circuits, repairing simple electronic equipment
- Take test readings using common instruments, such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes
- Apply technical knowledge of avionics systems in determining equipment malfunctions and expertise in restoring equipment condition and or operation
- Work under close supervision, receiving technical guidance from supervisor or higher-level technician
- Report to the Shift Lead/Maintenance Manager any safety issues/incidents/concerns as it happens
- Ensures hangar and work areas are neat, clean, orderly and in accordance with Blue Air Instruction Vol 4.
- Exercise knowledge of technical publications
- Comply with company maintenance and logistics procedures and policies
- Comply with FAA regulations as applicable
- Know and understand the functions and requirements of computerized maintenance software
- Perform other duties as assigned
- Apply advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents
- Determine the location and density of circuitry, evaluate electromagnetic radiation, isolate malfunctions, and incorporates engineering
- Exercises understanding of the interrelationships of circuits
- Exercise independent judgment in performing circuit analyses, calculating wave forms, and tracing relationships in signal flow
- Uses complex test instruments, such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment
- Provide technical guidance to lower level technicians
Stand Out From the Crowd
Upload your resume and get instant feedback on how well it matches this job.
What This Job Offers
Job Type
Full-time
Career Level
Entry Level
Education Level
No Education Listed
