Systems Integration Engineer, Senior

COLSA Corporation•Dayton, OH

About The Position

Perform systems engineering to include expertise in systems design and integration; manufacturing, quality and industrial engineering; airworthiness; and configuration, and data management. Assist in developing, deploying, and maintaining processes to assure weapon systems are fully integrated, manufactured, sustained, configuration managed and operationally safe, suitable and effective throughout their life cycle. Understand and execute AFPD 62-6, USAF Airworthiness, through standardized processes, and issuance of flight authorizations. Apply OSS&E and airworthiness processes, as well as assist in providing risk assessments, safety analysis and recommendations, and addressing high priority safety issues. Have knowledge of systems engineering in support of system definition, development, integration, verification methods, sustainment, risk modeling/simulation, testing and evaluation, human system integration (HSI), crew stations engineering, OSS&E efforts, interoperability requirements, and airworthiness certification across a wide range of hardware and software systems, including ground-based systems. Review and assist in performing assessments on program specific databases, analyzing BIT failure reports, and comparing failure reports against the BIT interpreter analyzer for accuracy of BIT indications; provide system integration guidance to aircraft program offices for the program system installation and system maintenance; review and analyze technical proposals or modifications for design feasibility and system capability; assist in conducting performance effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical and schedule risk assessments, and scheduling trade-off studies; and conducting systems analyses to including but not limited to system design/design feasibility and state-of-the-art assessments. Provide system integration guidance to the Government for the program system installation and system maintenance. Provide technical expertise and proper application of systems engineering processes to support technology and systems development. Assist in the development and review of the overall system design baseline (architecture and interoperability requirements). Apply an understanding of DoD, AF, and common engineering/scientific principles, processes, and procedures to improve performance and sustainability of existing and future AF and joint service weapon systems. Apply MIL-HDBK-516C Airworthiness Certification Criteria, to aircraft systems and subsystems and Support the System Integrity Programs including Mechanical Systems Integrity Program (MECSIP), assist in maintaining and updating the Critical Safety Item (CSI) list, and monitor airworthiness certification for mission partner aircraft. The Contractor shall understand and execute Air Force Policy Directive (AFPD) 62-6, USAF Airworthiness, associated AFIs and Airworthiness Bulletins through standardized processes and issuance of flight authorizations. Assist in translating user requirements into weapons system requirements, which will be used to design, develop, fabricate, test and evaluate weapons systems, subsystems and equipment for eventual fielding and deployment. Assist with the development of requirements and technology needs into action plans and policies necessary to improve and retain world class manufacturing, operations, re-manufacturing, and de-militarization/disposal of weapon system capabilities within the USAF. Assist in performing technical/mission analyses of existing and future operational requirements, assist in developing system concepts and perform technological/trade-off assessments of proposed designs/modifications. Assist in providing rapid response engineering service and support as augmentation to organic resources through in-depth problem identification, impact assessment, and development of corrective actions for critical supportability problems. Support and assist in conducting the system safety engineering program, including mishap risk assessments; evaluating contractor safety proposals and safety analyses; evaluating safety concerns of using and support commands; and assisting with resolution of high priority safety issues. Assist in performing material solution analyses leading up to design reviews and in producing or supporting development of draft documentation and presentation materials as requested or necessitated by programmatic limits based on cost, schedule, and performance. Assist in translating user requirements into system requirements, which will be used to design, develop, fabricate, test and evaluate systems, subsystems, and equipment for deployment and in providing support to produce or review products that include the following: technical evaluations/plans; engineering studies, reports, and analyses; and acquisition strategies/plans such as: ICD; Operational Requirements Document (ORD)/CDD; CONOPS; CPD; System Requirements Document (SRD); System Specification; RFPs; System Engineering Plan (SEP); Test and Evaluation Master Plan (TEMP); Test Acceptance Procedures (ATPs); Program Environment, Safety, and Occupational Health Evaluation (PESHE); information support plan; PPP; Technology Assessment/Control Plan (TA/CP); emerging technology assessments and Technology Transition Plans (TTPs); Information Assurance Strategy (IAS); Security Classification Guide (SCG); Alternative Live Fire Test and Evaluation Plan; Clinger-Cohen Act (CCA) compliance; Consideration of Technology Issues; Data Management Strategy; Chemical, Biological, Radiological, and Nuclear (CBRN) Survivability Assessments; Net-Centric Data Strategy; Spectrum Supportability Determination; Technical Data Rights Strategy; Technology Readiness 3.5.1.2.7 Assessment (TRA); Manufacturing Readiness Assessment (MRA); and other program/technical documents as required. Assist in developing and collecting technical data and inputs for staff summary packages and executive briefings to support coordination and signature of all associated documents for milestone approvals. Support project team meetings, working groups, and reviews as needed, such as: SRR, PDR, CDR, TRR, TCM, TIM, FCA, PCA, PRR, PMR, and other meetings/working groups/reviews as applicable. Assist in analyzing equipment and software deficiencies; make recommendations for equipment and software deficiency corrections; and assist in developing, integrating, and testing equipment and software deficiency solutions. Assist the USG in the engineering evaluation of prime and subcontractor recommendations for operational and support issues including but not limited to evaluations of Advance Change Study Notices (ACSN), ECPs, Contract Change Proposal (CCP), FAA bulletins, modification proposals, DMSMS, program risk, and related documents. Assist in the development and evaluation of IMP, IMS, and Systems Engineering Detail Schedule (SEDS) engineering cost estimates. Perform, as required, an advisory role for program weapon system contractor source selections on all engineering related requirements. Assist the USG in the performance of disciplined engineering activities to assure OSS&E for all products. The Contractor shall follow the Life Cycle Systems Engineering (LCSE) and OSS&E related AFIs and all lower level supplements and related documents including applicable OIs. Assist with establishing, implementing, and adhering to LCSE processes to ensure OSS&E compliance is achieved and maintained and aid the Air Force in reviewing and updating the OSS&E baseline document and shall support the Air Force in the identification of OSS&E elements, progress reporting of OSS&E metrics, and interaction with other organizations to ensure continued OSS&E compliance. Assist with the implementation of the SEP throughout program operations and advise the USG of pertinent shortfalls or gaps for which corrective actions may be needed. At COLSA, people are our most valuable resource and centered at our core value. We invite you to unite your talents with opportunity and be a part of our “Family of Professionals!” Learn about our employee-centric culture and benefits here: https://www.colsa.com/culture_benefits

Requirements

Expertise in systems design and integration.
Expertise in manufacturing, quality and industrial engineering.
Expertise in airworthiness.
Expertise in configuration and data management.
Understand and execute AFPD 62-6, USAF Airworthiness, through standardized processes, and issuance of flight authorizations.
Apply OSS&E and airworthiness processes.
Provide risk assessments, safety analysis and recommendations.
Address high priority safety issues.
Knowledge of systems engineering in support of system definition, development, integration, verification methods, sustainment, risk modeling/simulation, testing and evaluation, human system integration (HSI), crew stations engineering, OSS&E efforts, interoperability requirements, and airworthiness certification across a wide range of hardware and software systems, including ground-based systems.
Review and perform assessments on program specific databases.
Analyze BIT failure reports.
Compare failure reports against the BIT interpreter analyzer for accuracy of BIT indications.
Provide system integration guidance to aircraft program offices for the program system installation and system maintenance.
Review and analyze technical proposals or modifications for design feasibility and system capability.
Conduct performance effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical and schedule risk assessments, and scheduling trade-off studies.
Conduct systems analyses to including but not limited to system design/design feasibility and state-of-the-art assessments.
Provide system integration guidance to the Government for the program system installation and system maintenance.
Provide technical expertise and proper application of systems engineering processes to support technology and systems development.
Assist in the development and review of the overall system design baseline (architecture and interoperability requirements).
Apply an understanding of DoD, AF, and common engineering/scientific principles, processes, and procedures to improve performance and sustainability of existing and future AF and joint service weapon systems.
Apply MIL-HDBK-516C Airworthiness Certification Criteria, to aircraft systems and subsystems.
Support the System Integrity Programs including Mechanical Systems Integrity Program (MECSIP).
Maintain and update the Critical Safety Item (CSI) list.
Monitor airworthiness certification for mission partner aircraft.
Understand and execute Air Force Policy Directive (AFPD) 62-6, USAF Airworthiness, associated AFIs and Airworthiness Bulletins through standardized processes and issuance of flight authorizations.
Translate user requirements into weapons system requirements, which will be used to design, develop, fabricate, test and evaluate weapons systems, subsystems and equipment for eventual fielding and deployment.
Develop requirements and technology needs into action plans and policies necessary to improve and retain world class manufacturing, operations, re-manufacturing, and de-militarization/disposal of weapon system capabilities within the USAF.
Perform technical/mission analyses of existing and future operational requirements.
Develop system concepts.
Perform technological/trade-off assessments of proposed designs/modifications.
Provide rapid response engineering service and support as augmentation to organic resources through in-depth problem identification, impact assessment, and development of corrective actions for critical supportability problems.
Support and conduct the system safety engineering program, including mishap risk assessments.
Evaluate contractor safety proposals and safety analyses.
Evaluate safety concerns of using and support commands.
Assist with resolution of high priority safety issues.
Perform material solution analyses leading up to design reviews.
Produce or support development of draft documentation and presentation materials as requested or necessitated by programmatic limits based on cost, schedule, and performance.
Translate user requirements into system requirements, which will be used to design, develop, fabricate, test and evaluate systems, subsystems, and equipment for deployment.
Produce or review products that include the following: technical evaluations/plans; engineering studies, reports, and analyses; and acquisition strategies/plans such as: ICD; Operational Requirements Document (ORD)/CDD; CONOPS; CPD; System Requirements Document (SRD); System Specification; RFPs; System Engineering Plan (SEP); Test and Evaluation Master Plan (TEMP); Test Acceptance Procedures (ATPs); Program Environment, Safety, and Occupational Health Evaluation (PESHE); information support plan; PPP; Technology Assessment/Control Plan (TA/CP); emerging technology assessments and Technology Transition Plans (TTPs); Information Assurance Strategy (IAS); Security Classification Guide (SCG); Alternative Live Fire Test and Evaluation Plan; Clinger-Cohen Act (CCA) compliance; Consideration of Technology Issues; Data Management Strategy; Chemical, Biological, Radiological, and Nuclear (CBRN) Survivability Assessments; Net-Centric Data Strategy; Spectrum Supportability Determination; Technical Data Rights Strategy; Technology Readiness 3.5.1.2.7 Assessment (TRA); Manufacturing Readiness Assessment (MRA); and other program/technical documents as required.
Develop and collect technical data and inputs for staff summary packages and executive briefings to support coordination and signature of all associated documents for milestone approvals.
Support project team meetings, working groups, and reviews as needed, such as: SRR, PDR, CDR, TRR, TCM, TIM, FCA, PCA, PRR, PMR, and other meetings/working groups/reviews as applicable.
Analyze equipment and software deficiencies.
Make recommendations for equipment and software deficiency corrections.
Develop, integrate, and test equipment and software deficiency solutions.
Perform an advisory role for program weapon system contractor source selections on all engineering related requirements.
Perform disciplined engineering activities to assure OSS&E for all products.
Follow the Life Cycle Systems Engineering (LCSE) and OSS&E related AFIs and all lower level supplements and related documents including applicable OIs.
Establish, implement, and adhere to LCSE processes to ensure OSS&E compliance is achieved and maintained.
Review and update the OSS&E baseline document.
Identify OSS&E elements, progress reporting of OSS&E metrics, and interaction with other organizations to ensure continued OSS&E compliance.
Implement the SEP throughout program operations.
Advise the USG of pertinent shortfalls or gaps for which corrective actions may be needed.

Responsibilities

Perform systems engineering to include expertise in systems design and integration; manufacturing, quality and industrial engineering; airworthiness; and configuration, and data management.
Assist in developing, deploying, and maintaining processes to assure weapon systems are fully integrated, manufactured, sustained, configuration managed and operationally safe, suitable and effective throughout their life cycle.
Understand and execute AFPD 62-6, USAF Airworthiness, through standardized processes, and issuance of flight authorizations.
Apply OSS&E and airworthiness processes, as well as assist in providing risk assessments, safety analysis and recommendations, and addressing high priority safety issues.
Have knowledge of systems engineering in support of system definition, development, integration, verification methods, sustainment, risk modeling/simulation, testing and evaluation, human system integration (HSI), crew stations engineering, OSS&E efforts, interoperability requirements, and airworthiness certification across a wide range of hardware and software systems, including ground-based systems.
Review and assist in performing assessments on program specific databases, analyzing BIT failure reports, and comparing failure reports against the BIT interpreter analyzer for accuracy of BIT indications.
Provide system integration guidance to aircraft program offices for the program system installation and system maintenance.
Review and analyze technical proposals or modifications for design feasibility and system capability.
Assist in conducting performance effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical and schedule risk assessments, and scheduling trade-off studies.
Conduct systems analyses to including but not limited to system design/design feasibility and state-of-the-art assessments.
Provide system integration guidance to the Government for the program system installation and system maintenance.
Provide technical expertise and proper application of systems engineering processes to support technology and systems development.
Assist in the development and review of the overall system design baseline (architecture and interoperability requirements).
Apply an understanding of DoD, AF, and common engineering/scientific principles, processes, and procedures to improve performance and sustainability of existing and future AF and joint service weapon systems.
Apply MIL-HDBK-516C Airworthiness Certification Criteria, to aircraft systems and subsystems.
Support the System Integrity Programs including Mechanical Systems Integrity Program (MECSIP).
Assist in maintaining and updating the Critical Safety Item (CSI) list.
Monitor airworthiness certification for mission partner aircraft.
Understand and execute Air Force Policy Directive (AFPD) 62-6, USAF Airworthiness, associated AFIs and Airworthiness Bulletins through standardized processes and issuance of flight authorizations.
Assist in translating user requirements into weapons system requirements, which will be used to design, develop, fabricate, test and evaluate weapons systems, subsystems and equipment for eventual fielding and deployment.
Assist with the development of requirements and technology needs into action plans and policies necessary to improve and retain world class manufacturing, operations, re-manufacturing, and de-militarization/disposal of weapon system capabilities within the USAF.
Assist in performing technical/mission analyses of existing and future operational requirements.
Assist in developing system concepts and perform technological/trade-off assessments of proposed designs/modifications.
Assist in providing rapid response engineering service and support as augmentation to organic resources through in-depth problem identification, impact assessment, and development of corrective actions for critical supportability problems.
Support and assist in conducting the system safety engineering program, including mishap risk assessments.
Evaluate contractor safety proposals and safety analyses.
Evaluate safety concerns of using and support commands.
Assist with resolution of high priority safety issues.
Assist in performing material solution analyses leading up to design reviews.
Assist in producing or supporting development of draft documentation and presentation materials as requested or necessitated by programmatic limits based on cost, schedule, and performance.
Assist in translating user requirements into system requirements, which will be used to design, develop, fabricate, test and evaluate systems, subsystems, and equipment for deployment.
Provide support to produce or review products that include the following: technical evaluations/plans; engineering studies, reports, and analyses; and acquisition strategies/plans such as: ICD; Operational Requirements Document (ORD)/CDD; CONOPS; CPD; System Requirements Document (SRD); System Specification; RFPs; System Engineering Plan (SEP); Test and Evaluation Master Plan (TEMP); Test Acceptance Procedures (ATPs); Program Environment, Safety, and Occupational Health Evaluation (PESHE); information support plan; PPP; Technology Assessment/Control Plan (TA/CP); emerging technology assessments and Technology Transition Plans (TTPs); Information Assurance Strategy (IAS); Security Classification Guide (SCG); Alternative Live Fire Test and Evaluation Plan; Clinger-Cohen Act (CCA) compliance; Consideration of Technology Issues; Data Management Strategy; Chemical, Biological, Radiological, and Nuclear (CBRN) Survivability Assessments; Net-Centric Data Strategy; Spectrum Supportability Determination; Technical Data Rights Strategy; Technology Readiness 3.5.1.2.7 Assessment (TRA); Manufacturing Readiness Assessment (MRA); and other program/technical documents as required.
Assist in developing and collecting technical data and inputs for staff summary packages and executive briefings to support coordination and signature of all associated documents for milestone approvals.
Support project team meetings, working groups, and reviews as needed, such as: SRR, PDR, CDR, TRR, TCM, TIM, FCA, PCA, PRR, PMR, and other meetings/working groups/reviews as applicable.
Assist in analyzing equipment and software deficiencies.
Make recommendations for equipment and software deficiency corrections.
Assist in developing, integrating, and testing equipment and software deficiency solutions.
Assist the USG in the engineering evaluation of prime and subcontractor recommendations for operational and support issues including but not limited to evaluations of Advance Change Study Notices (ACSN), ECPs, Contract Change Proposal (CCP), FAA bulletins, modification proposals, DMSMS, program risk, and related documents.
Assist in the development and evaluation of IMP, IMS, and Systems Engineering Detail Schedule (SEDS) engineering cost estimates.
Perform, as required, an advisory role for program weapon system contractor source selections on all engineering related requirements.
Assist the USG in the performance of disciplined engineering activities to assure OSS&E for all products.
Follow the Life Cycle Systems Engineering (LCSE) and OSS&E related AFIs and all lower level supplements and related documents including applicable OIs.
Assist with establishing, implementing, and adhering to LCSE processes to ensure OSS&E compliance is achieved and maintained.
Aid the Air Force in reviewing and updating the OSS&E baseline document.
Support the Air Force in the identification of OSS&E elements, progress reporting of OSS&E metrics, and interaction with other organizations to ensure continued OSS&E compliance.
Assist with the implementation of the SEP throughout program operations.
Advise the USG of pertinent shortfalls or gaps for which corrective actions may be needed.