Tacker 2

The Shaw Group•Walker, LA

About The Position

The Shop Tacker welds metal components of products using the TIG process. The role requires passing an on-site test involving a 2-inch Schedule 80 TIG weld in a 5G position, with successful visual inspection and X-ray. The position does not pay per diem. The tacker performs welding and related preparation, assembly, and repair tasks, following instructions and established guidelines. Work is performed under minimal supervision, and the role typically reports to a supervisor. Employees must perform only work for which they are trained or authorized and follow company safety practices.

Requirements

  • Successfully pass the on-site Tacker Test: TIG weld 2-inch Schedule 80 pipe in a 5G position.
  • Pass visual inspection and X-ray of the test weld.
  • Use required personal protective equipment and comply with company safety rules.
  • Perform only jobs for which trained and/or authorized.

Responsibilities

  • Manually guide the electrode or gun along the weld line, maintaining arc length and travel speed to achieve the specified fusion depth and bead.
  • Obtain and install the specified electrode or thread consumable electrode wire through the welding gun.
  • Connect welding-unit cables to set amperage, voltage, slope, and pulse as specified by the Welding Engineer.
  • Start the power supply and strike an arc to generate heat, deposit electrode metal, and join work-piece edges.
  • Weld in flat, horizontal, vertical, or overhead positions.
  • Clean or degrease weld joints or work pieces using a wire brush, portable grinder, or chemical bath, as needed.
  • Repair broken or cracked parts and fill holes, as needed.
  • Prepare broken parts for welding by grooving or scarfing surfaces, as needed.
  • Remove excess weld, slag, and spatter using a hand scraper or power chipper, as needed.
  • Preheat work pieces using a hand torch or heating furnace, as needed.
  • Position and clamp work pieces together or assemble them in a jig or fixture, as needed.
  • Tack assemblies together, as needed.
  • Cut metal plates or structural shapes, as needed.
  • Pass employer performance tests or standard tests for certification when required.
  • Perform only work for which trained and/or authorized.
  • Follow safe job practices and company safety rules, use required personal protective equipment, and report unsafe conditions or practices.
  • Cooperate in investigations of accidents and participate in safety meetings, pre-job safety briefings, task hazard analyses, and Job Safety Analyses.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service