Fabrication Weld Tacker

Zachry Group•Freeport, TX
•Onsite

About The Position

ZACHRY/JVIC is seeking an experienced Tack Welder to join its fabrication team at the Freeport Shop. The role involves welding and fabricating, and assisting pipe fitters with installing industrial pipe into project piping systems. The posting states that no per diem is provided. The Tack Welder sets up equipment and welds parts using GTAW, reads and interprets WPS, prepares and joins component parts, performs quality tests on pipe and piping systems, and handles tools and rigging equipment. The position requires adherence to safety and environmental guidelines, reporting hazards and incidents, and commitment to Zachry’s values and safety rules. The work involves prolonged standing, walking, bending, squatting, and lifting, with the ability to work outdoors in varied weather and for periods up to 12 hours a day. Employees must wear required personal protective equipment.

Requirements

  • At least 1 year of welding experience.
  • Ability to weld in 2G, 4G, and 6G conditions.
  • Ability to TIG weld on pipe.
  • Familiarity with GTAW.
  • Current applicable welding certification with Zachry, or ability to successfully pass a weld test.
  • Ability to stand for 10 hours and squat and bend at the waist as needed throughout the day.
  • Ability to lift at least 50 pounds.
  • Professional ability to work well with management.
  • Excellent communication and teamwork abilities.
  • Attention to detail.
  • Proven work ethic.
  • Ability to work outdoors in weather including heat, cold, rain, snow, and wind, and for periods up to 12 hours a day.
  • Ability to use required personal protective equipment, including safety glasses, ear plugs, gloves, and steel-toe boots.

Nice To Haves

  • Former Zachry/JVIC employee.
  • High school diploma or GED, or formal/technical education.
  • Good communication skills.

Responsibilities

  • Comply with safety and environmental guidelines, policies, and regulations.
  • Identify tools required for tasks and perform minor tool maintenance and cleaning.
  • Identify safety risks and the precautions required to eliminate them.
  • Set up equipment and weld parts using GTAW.
  • Read and interpret WPS.
  • Clamp, hold, tack-weld, heat-bend, grind, or bolt component parts.
  • Operate a 4-inch angle grinder and small die grinder to grind pipe and fittings.
  • Perform tests to ensure the quality of pipe and piping systems.
  • Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment.
  • Report unsafe conditions to the safety department, supervisor, or management.
  • Immediately report incidents, accidents, and injuries involving employees to management.
  • Follow Zachry values, safety rules, and regulations.
  • Assist pipe fitters with installation of industrial pipe into project piping systems.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service