Senor Electrical Materials & Process Engineer

Boeing•Huntington Beach, CA

3d•Onsite

About The Position

Boeing Defense, Space & Security (BDS) is seeking a Senor Electrical Materials & Process Engineer to work in Huntington Beach, CA. This position requires a candidate to Lead the Huntington Beach Electrical Materials & Process (EM&P) Team to support avionics IPT design and manufacturing teams across the Enterprise. The position also requires the candidate to lead teams across the enterprise and work with other subject matter experts (SMEs) in engineering, quality, and supplier management developing and improving electrical business processes and practices including qualifying suppliers and performing root cause and corrective actions (RCCA) on electrical material and process issues. The candidate will be required to disposition electrical materials, PWBs, PWA/CCAs, electrical COTs assemblies, and cable assemblies through material review boards (MRB) and solving obsolete materials and unqualified suppliers. The Candidate will collaborate with electrical Components and Materials Laboratory to support the evaluations noted above. Other knowledge and skill areas that are expected by the candidate are conductive metal finishes, conductive adhesives & composites, lead-free mitigation, and electrostatic discharge (ESD) handing requirements. This position requires the Candidate to be a US Citizen, able to obtain a DOD security clearance as well as SSBI security clearance.

Requirements

Consultant (Level 5): Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Senior Consultant (Level 6): Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 20 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Minimum of 15-years of experience in Printed Circuit Boards (PCB), and PCB Assembly & Interconnect packaging experience down to the hybrid/MCM level IAW AS8030 Requirements Electronic Materials and Processes Management Plan used in Proprietary, Human-Space flight, Missile, Navy Shipboard Navigation & Sensors, and Military & Commercial Aircraft applications.
Knowledge and experience in Printed Wiring Board (PWB), Printed Wiring Assemblies (PWA) / Circuit Card Assemblies (CCA) IAW IPC design, fabrication, and acceptance requirements i.e., IPC-2221 PWB design, IPC-IPC-6012 rigid PWB acceptance, IPC-A-610 CCA acceptance requirements, and IPC J-STD-001 soldering class 3 including Space Addendum.
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.
An interim U.S. Secret Clearance Pre-Start and final U.S. Secret Clearance Post-Start is required.
Employer will not sponsor applicants for employment visa status.
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Nice To Haves

IPC-600, IPC-6012, IPC-A-610, J-STD-001 Class 3 including Space Addendum Certifications
ESD Survey of Suppliers IAW ANSI/ESD S20.20-2021
Laboratory experience in electronic failure analysis is a plus

Responsibilities

Lead Teams and delegate to team members
Use project management tools to meet the cost, technical and schedule requirements
Mentor and coach early career electrical M&P Engineers
Develop program CDRL DID deliverables (M&P Plans, Lead-Free Mitigation Plans, Corrosion Control Plans, M&P Lists, Qualification reports, etc.)
Review and approve Supplier SDRL DID deliverables, (M&P Plans, Corrosion Control Plans, M&P Lists, Qualification reports, etc.)
Support electrical designers in the selection of electrical materials (conformal coatings, solder, cleaning solutions, solder mask, adhesives, etc.) and processes
Develop and revise Material & Process Specifications, Manufacturing Work Instructions, & Product Standards
Develop and qualify new materials, processes, tools, & training plans
Support in-house and supplier PWB & CCA manufacturers, CCA Box integrators
Qualify or perform engineering survey/evaluation of PWB fabricator suppliers and CCA suppliers, manufacturing readiness, manufacturing audits, ESD, contamination, cleanliness, SPC controls, etc.
Resolve electrical M&P issues (PWB/CCA manufacturing, etc.) by conducting failure analysis and RCCA (Root Cause and Corrective Action)
Coordinate with Boeing and external laboratories for electrical material evaluations
Improve manufacturing processes, business practices, qualification & Inspection process, etc.
Apply knowledge of material properties to develop, select, or recommend parts, materials and processes that meet the environmental and regulatory requirements for chemical, environmental, mechanical, and electrical systems
Support Boeing Initiatives (Design Practices, etc.)
Custodianship of electrical product standards
Represent Boeing/voting member in Industry IPC-610, J-STD-001, IPC-6012 and other IPC Committees/Subcommittees
Travel is required to support these responsibilities 10%-40% of the time
The selected candidate will be required to work 100% onsite in Huntington Beach CA.