QC Inspector II
About The Position
Responsible for a wide range of inspection functions supporting sheet metal, assembly and machining operations without direct supervision. Interprets drawings, specifications, GD&T, MRB inputs and quality standards to perform and document inspection functions, including First Article Inspection Reports. Perform first article inspections on machined parts per AS9102 using micrometers, calipers, CMM and other measurement devices while working in compliance with AS9100 standards. Conduct inspection of finished machined parts; include in-process from first piece to final inspection. Participate in audits for AS9100 and Customers. Perform analytical investigations and develop root cause for non-conformance NCMRs and RMAs. Prepare product and inspection data for customer source inspection events; present product for buy-off and re-verify characteristics as requested by the Customer Representative. Mentor Level I Inspectors on inspection methods and documentation. Communicates with internal customers. Miscellaneous tasks as assigned.
Requirements
- Minimum of 5 years’ experience in an aerospace/aircraft environment
- Minimum 3 years Quality Inspection aerospace/aircraft GD&T tolerance application
- Inspection of machined parts
- Proficient in the use of precision measurement tools/equipment including but not limited to caliper, micrometer, height gage, hardness and conductivity
- Familiar with surface finish, edge preparation and general appearance of machined parts
- Familiar with outside processing certifications
- Proficient with Engineering drawings/models
- Computer literate
- Understanding of GD&T tolerance
- Basic knowledge of CATIA
- Set up and operate a CMM
- Basic understanding of CNC machining
- Understanding AS9100/QMS
- Perform audits and report findings
- Perform RCCA to solve issues using Lean Manufacturing tools
- Understanding and performing FAIRs per AS9102
- MRB participation
Nice To Haves
- Verisurf is a plus
- Net-Inspect is a plus
Responsibilities
- Perform first article inspections on machined parts per AS9102 using micrometers, calipers, CMM and other measurement devices while working in compliance with AS9100 standards
- Conduct inspection of finished machined parts; include in-process from first piece to final inspection
- Participate in audits for AS9100 and Customers
- Perform analytical investigations and develop root cause for non-conformance NCMRs and RMAs
- Set up and operate CMM, as well as other measurement/inspection tools
- Prepare product and inspection data for customer source inspection events; present product for buy-off and re-verify characteristics as requested by the Customer Representative
- Mentor Level I Inspectors on inspection methods and documentation
- Communicates with internal customers
- Miscellaneous tasks as assigned
Stand Out From the Crowd
Upload your resume and get instant feedback on how well it matches this job.
What This Job Offers
Job Type
Full-time
Career Level
Mid Level
Education Level
No Education Listed
