PRODUCTION WORKER 1ST SHIFT CURTAIN

ENGINEERING SERVICES & PRODUCTS C•Dyersville, IA
•Onsite

About The Position

A Production Worker produces, fabricates, and/or assembles products and sets up and maintains an environment in which products can be made. This is a safety-sensitive position involving the use of manufacturing machinery and tools, including fabric cutters, power hand tools, quilters, saws, and sewing machines. The position usually reports to an area supervisor, who reports to the Manufacturing ClearSpan Manager. The role involves preparing tools, machines, and materials; following work orders and design drawings; measuring, cutting, moving, fabricating, and assembling materials; inspecting and correcting work; and preparing finished products for the next assembly stage or transfer. The worker documents completed work, maintains and performs daily maintenance on equipment, keeps the workstation organized, and follows company safety procedures and OSHA regulations. The worker may be trained to operate a sit-down forklift as needed. Work takes place at a manufacturing facility in Dyersville, Iowa. The environment may have fluctuating indoor temperatures and may be dry, dusty, humid, cold, or hot, both indoors and outdoors. The position requires frequent standing, walking, hand and finger use, reaching, climbing or balancing, and stooping, kneeling, crouching, or crawling. It also involves lifting and moving up to 50 pounds, along with carrying, pushing, and pulling.

Requirements

  • Knowledge of corporate production methods and safety procedures.
  • Ability to lift up to 50 pounds.
  • Ability to read blueprints, schematics, drawings, and instructions.
  • Ability to use power and hand tools safely and effectively.
  • Ability to use a tape measure accurately.
  • Ability to handle production raw materials.
  • Skill in following directions and solving problems.
  • Appropriate communication skills.
  • Ability to read and follow written and verbal instructions.
  • Ability to work with minimal supervision.
  • Ability to interpret safety rules, operating and maintenance instructions, and procedure manuals.
  • Ability to perform basic arithmetic using whole numbers, common fractions, and decimals.
  • Ability to meet the role's physical demands, including regularly standing, walking, reaching, climbing or balancing, and stooping, kneeling, crouching, or crawling; occasionally sitting; and carrying, pushing, or pulling.

Nice To Haves

  • High school diploma or equivalent preferred.
  • Forklift certification is a plus.

Responsibilities

  • Set up the tools, sewing machines, saws, quilters, and materials needed for assigned products.
  • Operate power and hand tools, drills, fabric cutters, and other manufacturing machinery.
  • Load and unload workstations with tooling and product.
  • Review work orders for instructions and special requirements.
  • Measure, cut, and move materials into position according to design drawings and work order instructions.
  • Fabricate and/or assemble products.
  • Inspect completed work for quality, identify errors, and correct or rework them as needed.
  • Notify an external inspector and wait for inspection when required by the instructions.
  • Prepare finished products for the next assembly stage or transfer to another location as instructed.
  • Operate equipment safely in accordance with company safety procedures and regulations.
  • Document completed work.
  • Maintain a clean and organized workstation.
  • Perform daily equipment maintenance.
  • Follow safety and OSHA regulations.
  • Operate a sit-down forklift as needed after training.
  • Perform other duties as assigned.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service