Principal Power Electronics Engineer

ON.energy•Houston, TX

About The Position

ON.energy is hiring a product-focused Principal Power Electronics Engineer to own the design and behavior of the power conversion system (PCS) in its medium-voltage AI UPS™ product. The engineer will lead PCS product design and documentation, tune inverter controls, lead laboratory and field testing, and demonstrate ride-through and fault compliance in grid-following (GFL) and grid-forming (GFM) modes. The role works closely with PCS supplier control teams and internal business development, project, commissioning, and operations and maintenance engineering teams. It reports to the Senior Power Electronics Manager. The position covers inverter-control settings and protection parameters for MW-scale PCS, grid-integration and factory/site testing, and compliance with applicable IEEE, UL, and ERCOT requirements. It also includes reviewing simulations and hardware-in-the-loop (HIL) results, leading technical work with PCS suppliers, contributing to product and project engineering, supporting customer proposals and commissioning, and incorporating field learnings into product improvements.

Requirements

  • Bachelor's degree in Electrical Engineering, Power Electronics Engineering, or a similar field.
  • 8+ years of hands-on power electronics engineering experience in project-based or industrial settings.
  • Proven system-level design experience with MW-scale power electronics equipment.
  • Understanding of how BESS integrates with power electronics equipment.
  • Hands-on control design or tuning of three-phase grid-connected inverters, including dq current control, PLL and synchronization, and DC-link control.
  • Working knowledge of grid-forming control, including droop, VSG, and virtual impedance, and how GFM current limiting differs from GFL.
  • Direct experience with ride-through and fault behavior of inverter-based resources, including LVRT/HVRT, reactive current injection, and negative-sequence response, and knowledge of the governing grid codes.
  • Ability to read and critically review PSCAD/EMT study reports and HIL results from OPAL-RT or Typhoon, and compare them with measured test data.
  • Experience planning and running tests on MW-scale inverters or BESS in a laboratory, at FAT, or during site commissioning.
  • Ability to produce and read SLDs and GA drawings.
  • Strong waveform and data-analysis skills using Python, MATLAB, or similar tools.
  • Excellent communication across technical and non-technical teams, including clear technical writing for test procedures, reports, and settings rationale.

Nice To Haves

  • MS or PhD in a relevant field.
  • Experience with BESS, UPS / mission-critical, or utility-scale infrastructure projects, including IEC 62040-3 performance classes.
  • Experience with paralleled converters on common AC and DC buses, including load sharing, zero-sequence and circulating-current control, and interleaving.
  • Weak-grid (low-SCR) stability analysis and small-signal or impedance-based methods.
  • Grid-integration testing at a national laboratory or accredited facility.
  • Hands-on use of PSCAD, MATLAB/Simulink, or real-time simulation platforms such as RTDS, OPAL-RT, or Typhoon HIL.
  • ERCOT interconnection experience, including NOGRR 245 / 282 or large-load ride-through.
  • Experience working with an inverter OEM's firmware and parameter sets as the customer, not only as the designer.
  • AutoCAD experience and protection-settings coordination.

Responsibilities

  • Own, define, tune, and maintain inverter control and protection settings for MW-scale PCS in GFL and GFM modes, including current and voltage loops, PLL, droop and virtual impedance, current limiting and overload, and ride-through curves.
  • Maintain a controlled settings baseline for each project and firmware release.
  • Plan and lead grid-integration test campaigns at national laboratories, third-party facilities, factories, and project sites; write procedures, analyze waveforms, and issue reports.
  • Demonstrate compliance with LVRT/HVRT, frequency ride-through, phase-jump, fault-current, and reactive-current requirements under IEEE 2800, IEEE 1547 / UL 1741, and ERCOT rules for grid-side GFL and load-side GFM converters.
  • Analyze three-phase and unbalanced faults, low-SCR operation, paralleled-converter interactions, and circulating currents; recommend control or settings changes and verify them in testing.
  • Coordinate simulation and HIL studies with the modeling team by defining study and test cases, supplying settings and test data, reviewing reports, and comparing results with field and laboratory behavior.
  • Lead PCS product design by recommending design approaches and main-equipment vendors and participating in product design sprints.
  • Serve as technical lead with PCS suppliers; review firmware releases and change logs, specify required behavior, and qualify new or second-source inverters against a common test set.
  • Support business development by preparing technical proposals, including customer-specific SLDs and GAs.
  • Support project execution by compiling technical information packages, co-leading PCS reviews and validation, and maintaining technical documentation, including as-built drawings.
  • Support commissioning and O&M, participate in commissioning, resolve field events using waveform analysis, and feed design improvements back into the product.

Benefits

  • Competitive salary and annual performance-based bonus eligibility (US-based roles).
  • Medical, dental, and vision insurance (US-based roles).
  • 401(k) with company match (US-based roles).
  • Paid time off and company holidays (US-based roles).
  • Competitive salary and annual performance bonus eligibility (Mexico-based roles).
  • Christmas Bonus (Aguinaldo) of 30 days (Mexico-based roles).
  • Major medical expenses and life insurance (Mexico-based roles).
  • Paid time off and holidays per local policy (Mexico-based roles).
  • Professional development and growth opportunities (all roles).
  • Opportunity to grow with a mission-driven team shaping the future of clean energy (all roles).
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service