About The Position

ON.energy is hiring a product-focused Power Electronics Engineer to own the design and behavior of the power conversion system (PCS) in its medium-voltage AI UPS™ product. The role leads PCS product design and documentation, tunes inverter controls, leads laboratory and field testing, and demonstrates ride-through and fault compliance in grid-following (GFL) and grid-forming (GFM) modes. The engineer works closely with PCS supplier controls teams and ON.energy's business development, project, commissioning, and O&M engineering teams, and reports to the Senior Power Electronics Manager. The position covers inverter control settings and protection parameters, grid-integration testing, grid-code compliance, fault and weak-grid analysis, simulation and hardware-in-the-loop studies, product design, supplier technical leadership, proposal development, project execution, commissioning, and O&M support. Work involves MW-scale liquid-cooled PCS, 1.5 kV DC battery systems, and medium-voltage transformers, with applicable standards including IEEE 2800, IEEE 1547 / UL 1741, ERCOT rules, and IEC 62040-3.

Requirements

  • Bachelor's degree in Electrical Engineering, Power Electronics Engineering, or a similar field.
  • At least 8 years of hands-on power electronics engineering experience in project-based or industrial settings.
  • Proven system-level design experience with MW-scale power electronics equipment.
  • Understanding of how BESS integrates with power electronics equipment.
  • Hands-on control design or tuning experience with three-phase grid-connected inverters, including dq current control, PLL and synchronization, and DC-link control.
  • Working knowledge of grid-forming control, including droop, VSG, and virtual impedance, and how GFM current limiting differs from GFL.
  • Direct experience with inverter-based resource ride-through and fault behavior, including LVRT/HVRT, reactive current injection, negative-sequence response, and governing grid codes.
  • Ability to read and critically review PSCAD/EMT study reports and HIL results from OPAL-RT or Typhoon, and compare them with measured test data.
  • Experience planning and running tests on MW-scale inverters or BESS in a laboratory, factory acceptance test, or site commissioning setting.
  • Ability to produce and read SLDs and GA drawings.
  • Strong waveform and data analysis skills using Python, MATLAB, or similar tools.
  • Excellent communication across technical and non-technical teams, and clear technical writing for test procedures, reports, and settings rationale.

Nice To Haves

  • MS or PhD in a relevant field.
  • Experience with BESS, UPS / mission-critical, or utility-scale infrastructure projects, including IEC 62040-3 performance classes.
  • Experience with paralleled converters on common AC and DC buses, including load sharing, zero-sequence and circulating-current control, and interleaving.
  • Weak-grid (low-SCR) stability analysis experience using small-signal or impedance-based methods.
  • Grid-integration testing experience at a national laboratory or accredited facility.
  • Hands-on experience with PSCAD, MATLAB/Simulink, or real-time simulation tools such as RTDS, OPAL-RT, or Typhoon HIL.
  • ERCOT interconnection experience, including NOGRR 245 / 282 and large-load ride-through.
  • Experience working as a customer with an inverter OEM's firmware and parameter sets, not only as a designer.
  • AutoCAD and protection settings coordination experience.

Responsibilities

  • Own, define, tune, and maintain inverter control and protection settings for MW-scale PCS in GFL and GFM modes, including current and voltage loops, PLL, droop, virtual impedance, current limiting, overload, and ride-through curves.
  • Maintain a controlled settings baseline for each project and firmware release.
  • Plan and lead grid-integration test campaigns at national laboratories and third-party facilities, as well as factory acceptance tests and site tests.
  • Write test procedures, analyze waveforms, and issue test reports.
  • Demonstrate compliance with LVRT/HVRT, frequency ride-through, phase-jump, fault-current, and reactive-current requirements under IEEE 2800, IEEE 1547 / UL 1741, and ERCOT rules for grid-side GFL and load-side GFM converters.
  • Analyze three-phase and unbalanced faults, low-SCR operation, paralleled-converter interactions, and circulating currents; recommend control or setting changes and verify them through testing.
  • Coordinate simulation and HIL studies with the modeling team by defining study and test cases, supplying settings and test data, reviewing reports, and confirming that results match field and laboratory behavior.
  • Lead PCS product design, recommend design approaches and main-equipment vendors, and participate in product design sprints.
  • Serve as technical lead with PCS suppliers by reviewing firmware releases and change logs, specifying required behavior, and qualifying new or second-source inverters against a common test set.
  • Prepare technical proposals, including SLDs and GAs tailored to customer needs.
  • Support project execution by compiling technical information packages, co-leading PCS topic reviews and validation, and maintaining technical documentation, including as-built drawings.
  • Support commissioning and O&M, participate in commissioning, resolve field events through waveform analysis, and feed design improvements back into the product.

Benefits

  • Competitive salary and eligibility for an annual performance-based bonus.
  • Medical, dental, and vision insurance for US-based roles.
  • 401(k) with company match for US-based roles.
  • Paid time off and company holidays for US-based roles.
  • Christmas Bonus (Aguinaldo) of 30 days for Mexico-based roles.
  • Major medical expenses and life insurance for Mexico-based roles.
  • Paid time off and holidays under local policy for Mexico-based roles.
  • Professional development and growth opportunities.
  • Opportunity to grow with a mission-driven team shaping the future of clean energy.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service