Pipe Welder

RC&E•Fort Worth, TX

5h•Onsite

About The Position

Responsible for the installation, repair, and construction of industrial refrigeration systems for ammonia piping and other related piping systems. Works on components that include structural frames, pipe supports, equipment, steel supports, and all carbon and stainless refrigeration materials. Must have successfully achieved documented welding certification for stick welding of Carbon Steel and/or Stainless-Steel pressure piping and structures to applicable ASME code and RC&E welding procedure standards. Uses a variety of hand tools and sketches, and directs helpers in limited tasks. Responsibilities include clamping, holding, tack-welding, heat-bending, grinding, or bolting component parts to obtain required configurations and positions for welding. Prepares all material surfaces to be welded, ensuring they are free of loose or thick scale, slag, rust, moisture, grease, or other foreign matter. Removes rough spots from work pieces using portable grinders, hand files, or scrapers. Chips or grinds off excess weld, slag, or spatter using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Welds steel structures and components in flat or vertical positions using fillet weld procedures.

Requirements

Must have successfully achieved documented welding certification for stick welding of Carbon Steel and/or Stainless-Steel pressure piping and structures to applicable ASME code and RC&E welding procedure standards.
Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc, gas metal arc, and orbital welding equipment.
Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
Monitor the fitting, burning, and welding processes to avoid overheating parts or warping, shrinking, distortion, or expansion of material.
Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
Detect faulty operation of equipment or defective materials and notify supervisors.
Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, submerged arc welding, and orbital welding.
Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.

Nice To Haves

Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
Analyze sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
Hammer out bulges or bends in metal work pieces.
Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
Use fire suppression methods in industrial emergencies.
Participate in site housekeeping.
Become familiar with and learn to be able do the following: Mark or tag material with proper job number, piece marks, and other identifying marks as required.
Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.

Responsibilities

Works on components that include the following: structural frames, pipe supports, equipment, steel supports, all carbon and stainless refrigeration materials.
Works with carbon and stainless-steel materials.
Use a variety of hand tools and sketches.
Direct helpers in limited tasks.
Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required limited configurations & positions for welding.
Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment
Weld steel structures and components in flat or vertical positions using fillet weld procedures.
Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc, gas metal arc, and orbital welding equipment.
Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
Monitor the fitting, burning, and welding processes to avoid overheating parts or warping, shrinking, distortion, or expansion of material.
Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
Detect faulty operation of equipment or defective materials and notify supervisors.
Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, submerged arc welding, and orbital welding.
Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
Analyze sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
Hammer out bulges or bends in metal work pieces.
Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
Use fire suppression methods in industrial emergencies.
Participate in site housekeeping.
Mark or tag material with proper job number, piece marks, and other identifying marks as required.
Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.

Benefits

Eligible for healthcare benefits on Day 1 of employment: Medical, dental, vision, and prescription drug coverage
Flexible Spending Account (FSA), Dependent Care Spending Account (DCSA)
Health Savings Account (HSA)
Company-paid Life Insurance; Supplemental Employee, Spouse, and Dependent Life
Accident Hospital Indemnity
Company-paid Short and Long-term Disability Insurance
Pet Insurance
Employer matched 401(k) saving plan (with Roth option)
Weekly paycheck
Generous paid holiday schedule (11 days per year)
Paid time off (vacation + sick time)
Learning & Development programs
Employee Referral Bonus Program
Tuition Reimbursement