Pipe Welder/Fabricator

Victaulic•McMinnville, OR

1d•Onsite

About The Position

This role involves various levels of pipe welding and fabrication, focusing on Victaulic standard and engineered products. The position requires proficiency in different welding processes (GMAW-P, GTAW, RMD) and adherence to ASME Section IX standards. Responsibilities range from basic setup and welding of standard parts to more complex fabrication, rigging, crane operation, and assisting with welding robot operations. The role also includes troubleshooting, mentoring, and contributing to new product weldability assessments.

Requirements

Certification to weld A53 pipe in 1G-R position using the GMAW-P process in accordance with ASME Sec. IX.
Certification to weld A312 pipe in 1G-R position using the GMAW-P process in accordance with ASME Sec. IX.
Certification to weld A53 O-Lets using the GTAW process for root and using the GMAW-P process on cap in accordance with ASME Sec. IX.
Pass Visual test for SCH. 10 & 40 TEE Fittings in a 1G-R position using the GMAW-P Process.
Pass a configuration / fitup test which includes an O-Lets and flange configured part.
Proficient understanding of Victaulic ES1124 weld standard.
Proficient understanding of part configurations via shop drawing.
Proficient understanding of Victaulic weld symbols.
Proficient understanding of measurement devices.
Proficiently configure Victaulic standard parts 4” – 12” in diameter at any length.
Proficiently weld Victaulic standard parts 4” - 12” in diameter at any length.
Certification to weld A53 pipe in 2G position using the RMD & GMAW-P processes in accordance with ASME Sec. IX.
Certification to weld A312 pipe in 2G position using the RMD & GMAW-P processes in accordance with ASME Sec. IX.
Proficient Rigging & Crane operation for non-standard, long, and large parts.
Proficiently weld Victaulic standard parts < 3” in diameter at any length.
Proficiently weld Victaulic standard parts 12” + in diameter at any length.
Perform the duties of a Level 1 Structural Welder.
Advanced knowledge on troubleshooting procedures.

Nice To Haves

Assist Welding Robot Operators with Fitup of Full Flow & Flange parts when required.
Assist Welding Robot Operators with basic Weld Robot Operation when required.
Balance welding related production where required.
Assist in trialing new part weldability and feasibility.
Assist in mentoring less skilled welders with best practices.

Responsibilities

Proper machine/positioner setup and upkeep procedures.
Welding A53 pipe in 1G-R position using GMAW-P process.
Welding A312 pipe in 1G-R position using GMAW-P process.
Welding A53 O-Lets using GTAW for root and GMAW-P for cap.
Passing Visual tests for SCH. 10 & 40 TEE Fittings in 1G-R position using GMAW-P Process.
Passing a configuration/fitup test including O-Lets and flange configured part.
Configuring Victaulic standard parts 4” – 12” in diameter at any length.
Welding Victaulic standard parts 4” - 12” in diameter at any length.
Assisting Welding Robot Operators with Fitup of Full Flow & Flange parts.
Assisting Welding Robot Operators with basic Weld Robot Operation.
Welding A53 pipe in 2G position using RMD & GMAW-P processes.
Welding A312 pipe in 2G position using RMD & GMAW-P processes.
Rigging & Crane operation for non-standard, long, and large parts.
Welding Victaulic standard parts < 3” in diameter at any length.
Welding Victaulic standard parts 12” + in diameter at any length.
Balancing welding-related production where required.
Performing duties of a Level 1 Structural Welder.
Assisting in trialing new part weldability and feasibility.
Assisting in mentoring less skilled welders with best practices.