Offshore Crane Operator

Gulf Island•Houma, LA

1d•Onsite

About The Position

The Offshore Crane Operator is responsible for operating main and deck cranes within their designed safe working load (SWL), applying the relevant de-rating tables for prevailing weather and sea-state conditions. The position is located offshore in the Gulf of America, formerly known as the Gulf of Mexico. The operator inspects and maintains the crane and related equipment, performs required function tests and pre-use inspections, and ensures operations comply with manufacturer instructions and applicable requirements, including the most current edition of API RP 2D as incorporated by reference under 30 CFR 250.198. The operator participates in lift planning and safety meetings, verifies crane capacity and load conditions, coordinates with the appointed signalman, and conducts lifts safely and in a controlled manner. The role also includes following helicopter-operation precautions, securing the boom in specified conditions, complying with diving simultaneous-operations plans, and inspecting and protecting rigging equipment. Approximately 80–90% of work activities are outdoors. The operator may encounter changing temperatures and hot, cold, humid, wet, dry, dusty, or muddy conditions, as well as paint thinner and paint fumes. Gulf Island does not sponsor work visas; applicants must already be authorized to work in the United States on a full-time basis.

Requirements

Valid TWIC card.
Water survival qualification.
PEC or Rig Pass (Safe Gulf).
Crane Operator Classification A, as required by client standards.
Must be currently authorized to work in the United States on a full-time basis; the employer will not sponsor work visas.
Ability to meet the listed physical demands, including lifting up to 25 pounds and occasionally 50–75 pounds.

Nice To Haves

High school diploma or GED.

Responsibilities

Complete and document required inspections of operated equipment, recording and reporting discrepancies.
Conduct crane operations safely and within designed safe working loads and applicable de-rating limits.
Maintain the crane in accordance with the most current edition of API RP 2D, as incorporated by reference under 30 CFR 250.198, and ensure required documentation is maintained at the facility.
Use equipment in accordance with the manufacturer’s instructions.
Confirm safety devices are in good working order and maintained in accordance with local requirements.
Carry out function tests before each use and perform pre-use inspections of the crane and boom.
Participate in planning, job safety analysis (JSA), and pre-lift safety meetings for lifting operations requiring the crane.
Verify communication methods with the appointed signalman before starting a lift.
Verify crane capacity for the configuration, weather conditions, and other limiting factors; account for dynamic factors and check dynamic load charts before proceeding.
Know the load weight and center of gravity, assess the load path, and ensure the landing area is clear and has suitable capacity.
Ensure personnel are clear of the load and controls are in place before commencing a lift.
Operate the crane with controlled, smooth, and careful movements.
Check for expected helicopter operations, place the crane in a safe position, and exit the cab so the pilot can see the operator before helicopter landing and takeoff.
Cradle the crane boom during severe weather, high winds, and periods of infrequent use, especially at night.
Follow the Diving Operations Sim Ops Plan while diving operations are in progress.
Pre-use inspect synthetic and wire rope slings, protect them from sharp edges and damage during lifts, and understand rigging equipment operating limits.