Machinist II - Cylindrical Grind 2nd Shift - Monroe NC

Military Spouse Corporate Career Network•Monroe, NC

1d•Onsite

About The Position

This position involves semi and finish grinding all outside diameters (ODs) on rotors, shafts, ring gears, etc. Some toolroom grinding such as arbors and bushings will also be required. The machinist will use their own judgment and minimal direction to produce a quality ground rotor in a safe and efficient manner. Responsibilities include grinding all diameters on all rotors, shafts, etc., inspecting sizes, lengths, finishes, radii, etc., filling out all paperwork, monitoring coolant, and maintaining good housekeeping.

Requirements

Must be able to read and follow detailed instructions.
Must be able to fill out forms as needed such as: daily labor report, log sheet, etc.
Use of mathematics.
Reading fairly complicated drawings, specifications, charts, etc.
Lift, pull, and push.
Continuously, walk or move from one machine to as many as three.
Physically, load and unload parts.
Clean parts and centers of chips and wipe dry.
Physically, lift and check all dimensions, machine to conform with finish drawing.
Make adjustment on machine as needed to produce quality parts within specifications and standards given/per piece.
HS Diploma – with 1-3 years machining experience preferred.

Nice To Haves

Technical Degree in Machining a plus.

Responsibilities

Semi and finish grind all ODs on rotors, shafts, ring gears, etc.
Perform toolroom grinding such as arbors and bushings.
Produce a quality ground rotor in a safe and efficient manner with own judgement and minimal directions.
Grind all diameters on all rotors, shafts, etc.
Inspect sizes, lengths, finishes, radii, etc.
Properly fill-out all paperwork.
Monitor coolant.
Keep good housekeeping.
Operate one, two, or more machines including: NCCG, CYC, lapper, etc.
Use precision measuring equipment such as micrometer, dial caliper, profilometer, etc. to inspect rotor, shafts, ring gears, and various other parts.
Operate electric or air-power crane/forklift.
Deburr utilizing a file, or other hand tool such as die grinder.
Clean parts and centers of chips and wipe dry.
Lift and check all dimensions, machine to conform with finish drawing.
Make adjustment on machine as needed to produce quality parts within specifications and standards given/per piece.
Utilize multi-function electric or air-crane (where available) to lift/move/load/unload parts, to perform workcenter functions.
Step up to and down from elevator work platform and on to various parts of machine for wheel changes and cleaning.
Compliance with all rules and regulations, normal safety precautions.
Work alone, recognize, and immediately correct machine difficulties or errors; or, cause to have corrected; if fault is due to machine tool, equipment, or material.
Maintain a clean, safe, efficient work area.
Maintain all paperwork as needed.
Consistently produce work of proper quality and required quantity.