Lead Test Engineer (Power Distribution)

Trystar•Cypress, TX
•$135,000 - $155,000•Onsite

About The Position

Trystar is hiring a Lead Test Engineer to establish and lead design verification and validation practices for power distribution products and integrated systems, from concept through certification and release to commercial-scale manufacturing. Products include docking stations, transfer switches, loadbanks, distribution panels, switchboards, switchgear, transformers, and integrated power distribution centers and e-houses for data centers and other critical power applications. Equipment spans AC and DC and low and medium voltage. This is a senior individual-contributor role with no direct reports. The engineer will develop test methods, plans, procedures, and setups to demonstrate that designs meet product requirements and applicable standards, and will conduct or witness testing at company facilities, supplier factories, NRTLs, high-power laboratories, integrated system tests, and customer sites. The role also directs technicians and engineers on a project basis, investigates failures, documents results and risks, and translates design verification results into end-of-line test requirements for manufacturing. The position is onsite in Houston, TX; Faribault, MN; Burnsville, MN; or Charlotte, NC, with travel within North America up to 30%. Work takes place in laboratories, factories, and customer sites, including energized, high-voltage, and high-energy test areas. Required PPE follows NFPA 70E and site rules. The role involves standing, walking, climbing, kneeling, and reaching for extended periods, and lifting test equipment weighing up to 50 pounds, using mechanical aids where required.

Requirements

  • Bachelor’s degree in electrical engineering or a related technical field.
  • Typically 7 or more years of relevant industrial experience in hands-on testing and validation of power distribution equipment.
  • Experience with design verification and type testing of power distribution equipment such as switchboards, switchgear, transfer switches, panelboards, transformers, or loadbanks, including test methods, plans, procedures, and reports traced to product requirements.
  • Working knowledge of product and test standards for power distribution equipment, such as UL 891; UL 1558 and IEEE C37.20.1; IEEE C37.20.2 and C37.20.3; UL 1008; UL 67; UL 1640; UL 508 and UL 508A; UL 1561 and the IEEE C57.12 series; UL 50, UL 50E, ANSI/NEMA 250, IEC 60529, and the NEC. Experience with every listed standard is not required.
  • Experience preparing for and conducting or witnessing tests at NRTLs or high-power laboratories.
  • Proficiency with most of the following: power analyzers, oscilloscopes, high-voltage and current probes, thermal data acquisition, hipot and insulation resistance testers, micro-ohmmeters, transformer turns ratio testers, and current injection test sets.
  • Proficiency with Python for test automation and data analysis.
  • Experience planning and tracking test schedules, identifying dependencies, and communicating test readiness and risks to engineering and program leadership.
  • Working knowledge of NFPA 70E and safe work practices for energized, high-voltage, and high-energy testing.
  • Demonstrated experience leading test programs, influencing design teams, and directing technicians and engineers.
  • Analytical rigor and attention to detail in measurement, data analysis, and test documentation.
  • Sound engineering judgment in balancing test coverage, risk, schedule, and safety, and independence and integrity in reporting results that constrain a design.
  • Clear written and verbal communication of test results, anomalies, and limitations to technical and non-technical audiences.
  • Collaborative technical leadership across electrical, mechanical, controls, compliance, quality, and manufacturing engineering, and with suppliers and customers.
  • Disciplined planning, prioritization, and delivery of test campaigns against a development schedule.

Nice To Haves

  • Master’s degree in electrical engineering, mechanical engineering, or a related technical field.
  • Experience testing medium-voltage equipment, including lightning impulse (BIL), power-frequency withstand, partial discharge, and internal arcing tests to IEEE C37.20.7, and working knowledge of UL 1562 for medium-voltage dry-type transformers.
  • Experience testing DC power distribution equipment up to 1500 VDC, including 800 VDC class systems, and validating loadbanks.
  • Experience with factory and site acceptance testing of power distribution centers, e-houses, or similar integrated systems, including acceptance testing to ANSI/NETA standards.
  • Experience testing controls and communications of power equipment, such as PLCs, transfer switch controllers, and Modbus, and working knowledge of UL 61010-1 and UL 61010-2-201.
  • Experience with seismic, environmental, transport, vibration, structural, and lifting validation of electrical equipment and enclosures.
  • Experience with test traceability, test data logging, and test data management systems.
  • Experience with data center or other critical power applications.
  • NETA Level 3 or Level 4 technician certification, NFPA Certified Electrical Safety Compliance Professional (CESCP), or Professional Engineer (PE) license.

Responsibilities

  • Own design verification by test and demonstration, and design validation, for assigned power distribution products and integrated systems from concept through certification and release to commercial-scale manufacturing.
  • Develop test methods, plans, procedures, and acceptance criteria traceable to product requirements, DFMEAs, and applicable standards; agree on verification methods with technical leads and design engineers.
  • Plan, run, and analyze design verification and type tests, including dielectric withstand, insulation resistance, temperature rise, short-circuit withstand and closing, endurance, and transformer ratio, impedance, and loss tests.
  • Plan reliability and accelerated life tests, and apply design of experiments when useful to reduce field-failure risk.
  • Verify enclosure performance to UL 50E and ANSI/NEMA 250, and IEC 60529 when a customer specifies an IP rating, including rain, external icing, and corrosion-protection tests for NEMA Type 3R outdoor enclosures.
  • Validate medium-voltage equipment, DC distribution equipment up to 1500 VDC, and AC and DC loadbanks, including protection, controls, metering, and communications; coordinate with power conversion test engineering when systems include rectifiers, converters, or solid-state transformers.
  • Prepare products and samples for compliance testing, conduct pre-compliance tests, and conduct or witness listing tests at NRTLs and high-power laboratories in coordination with the compliance team.
  • Agree on factory test plans with suppliers of new components and subsystems, witness factory acceptance tests, host customer witness tests of new products, and report results against acceptance criteria.
  • Plan and run integrated system tests of first-of-a-kind power distribution centers and e-houses, and validation tests at pilot customer sites in coordination with project, commissioning, and service teams.
  • Design, build, and maintain test benches, fixtures, instrumentation, data acquisition, and interlocks; maintain calibration records traceable to standards.
  • Write and maintain energized test procedures with environmental, health, and safety staff under NFPA 70E, and direct technicians, electricians, and assemblers in safe test execution.
  • Automate test sequences, data acquisition, and data analysis in Python, and maintain test records and data.
  • Record objective evidence for verified requirements, write independent test reports, and present test status, anomalies, and residual risks at design reviews and verification-of-readiness reviews.
  • Investigate test failures, support root-cause analysis with design and quality engineers, verify corrective actions by retest, and feed lessons learned into design guidelines and test standards across Trystar sites.
  • Derive end-of-line test requirements for commercial-scale manufacturing from design verification results and hand them over to manufacturing at each release.
  • Evaluate test equipment and methods, and specify laboratory capability investments as product voltage, current, and power ratings grow.
  • Develop and maintain the product validation schedule, identify dependencies and critical-path activities, and communicate readiness, blockers, risks, and completion status to engineering and program leadership.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service