Lead Test Engineer (Power Conversion)

Trystar•Merrimack, NH
•$135,000 - $155,000•Onsite

About The Position

Trystar is seeking a Lead Test Engineer, Power Conversion, to own the design verification and validation of power conversion products from initial prototypes through certification and release to commercial-scale manufacturing. Products include rectifiers, inverters, DC/DC converters, and integrated power conversion systems for data centers, energy storage, and other critical power applications, at power levels from tens to hundreds of kilowatts and voltages up to 1500 VDC. This senior individual-contributor role develops test methods, plans, procedures, acceptance criteria, and laboratory benches; conducts tests in the power laboratory; validates integration among power hardware, embedded controls, firmware, communications, and supervisory systems; and leads compliance, temperature-rise, and environmental testing at Trystar and external laboratories, including certification laboratories and NRTLs. The role establishes verification and validation practices for design teams and directs test technicians and engineers. The position is onsite in Merrimack, New Hampshire, with travel within North America up to 25%. Work takes place in power laboratories, manufacturing areas, and external test laboratories, including energized, high-voltage, and high-energy test areas. The role requires use of PPE in accordance with NFPA 70E and site rules; standing, walking, climbing, kneeling, and reaching for extended periods; and lifting test equipment up to 50 pounds, using mechanical aids where required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.

Requirements

  • Bachelor’s degree in electrical engineering or a related technical field.
  • Typically 7 or more years of relevant industrial experience in hands-on testing and validation of power electronic converters.
  • Hands-on bench-testing experience with rectifiers, inverters, DC/DC converters, UPS, or similar equipment at power levels from tens to hundreds of kilowatts.
  • Experience writing test methods, plans, procedures, and reports traced to product requirements.
  • Experience preparing for and conducting compliance testing at certification laboratories or NRTLs, including temperature-rise testing.
  • Experience validating interactions among power hardware, embedded controls, firmware, communications, and supervisory control systems, including sequencing, fault handling, and communications-loss recovery.
  • Experience planning and conducting environmental tests to IEC 60068-2, MIL-STD-810, or equivalent standards.
  • Experience automating tests and data acquisition in LabVIEW.
  • Proficiency with power analyzers, oscilloscopes, high-voltage and current probes, thermocouple data acquisition, grid simulators, regenerative DC sources and loads, and battery simulators.
  • Proficiency with Python for test automation and data analysis, and Jira for test planning and tracking.
  • Working knowledge of NFPA 70E and safe work practices for high-voltage and high-energy testing.
  • Experience planning and tracking test schedules, identifying dependencies, and communicating test readiness and risks to engineering and program leadership.
  • Demonstrated experience leading test programs, influencing design teams, and directing technicians and engineers.
  • Analytical rigor and attention to detail in measurement, data analysis, and test documentation.
  • Sound engineering judgment in balancing test coverage, risk, schedule, and safety, and independence and integrity in reporting results that constrain a design.
  • Clear written and verbal communication of test results, anomalies, and limitations to technical and non-technical audiences.
  • Collaborative technical leadership across power electronics, controls, firmware, mechanical, systems, compliance, and manufacturing engineering.
  • Disciplined planning, prioritization, and delivery of test campaigns against a development schedule.

Nice To Haves

  • Master’s degree in electrical engineering.
  • NI Certified LabVIEW Developer (CLD) or Certified LabVIEW Architect (CLA).
  • Experience with NI TestStand for test automation.
  • Experience with hardware-in-the-loop testing, such as OPAL-RT, and with PSCAD or MATLAB/Simulink.
  • Experience with product and test standards such as UL 62477-1, UL 1741 and IEEE 1547, IEC 62040-3, UL 9540, the IEC 61000 series, and IEC 60529 or UL 50E.
  • Experience testing DC power, data center, or battery energy storage products.
  • Experience testing liquid-cooled power equipment.
  • Experience with HALT, HASS, or accelerated life testing.
  • Experience with SCADA, test data logging, and test data management systems.
  • Experience with industrial communications protocols, such as Modbus or CAN, in testing power conversion controls.
  • NFPA Certified Electrical Safety Compliance Professional (CESCP).

Responsibilities

  • Own design verification by test and demonstration, and design validation, for assigned power conversion products from prototype through certification and commercial-scale manufacturing release.
  • Develop test methods, plans, procedures, and acceptance criteria traceable to product requirements, agreeing on verification methods with systems and design engineers.
  • Design, build, and commission test benches and fixtures for rectifiers, inverters, and DC/DC converters, including power sources and loads, instrumentation, interlocks, and protection.
  • Set up and operate power laboratory equipment, including grid simulators, regenerative DC sources and loads, power analyzers, oscilloscopes, high-voltage and current probes, thermal data acquisition, and liquid cooling systems.
  • Automate test sequences, equipment control, and data acquisition in LabVIEW, and maintain test software, data logging, and test records.
  • Run and analyze functionality, performance, efficiency, protection, fault-injection and fault-response, transient and load-step, parallel-operation, and endurance tests.
  • Validate interactions among power hardware, embedded controls, firmware, communications, and supervisory control systems, including sequencing, state transitions, fault handling, communications loss, and recovery behavior.
  • Plan and run temperature-rise tests and correlate measured temperatures with thermal models and component ratings.
  • Plan and run environmental tests, including cold, dry heat, damp heat, temperature cycling, vibration, and shock, at Trystar or external laboratories.
  • Prepare products and samples for compliance testing, conduct pre-compliance tests, and conduct and witness safety, grid-interconnection, and EMC tests at certification laboratories and NRTLs.
  • Record objective evidence for verified requirements, write test reports, and present test status, anomalies, and residual risks at design reviews and verification readiness reviews.
  • Investigate test failures, lead root-cause analysis with design engineers, and verify corrective actions through retesting.
  • Derive end-of-line test requirements for commercial-scale manufacturing from design verification results and hand them off to manufacturing test engineering.
  • Direct test technicians and engineers during test execution, enforce safe high-voltage and high-energy work practices, and keep test equipment calibrated and ready for use.
  • Evaluate test equipment and methods and recommend laboratory capability investments as product voltage and power ratings increase.
  • Develop and maintain product validation schedules, identify dependencies and critical-path activities, and communicate readiness, blockers, risks, and completion status to engineering and program leadership.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service