Lead Engineer 2nd Shift

Q - Center•St. Charles, IL

5d•Onsite

About The Position

The Lead Maintenance Engineer is responsible for overseeing decisions on operating adjustments, operating and maintaining all mechanical, electrical, plumbing and building equipment to perform as intended and to provide a comfortable stay to all guests and associates. The Engineer Lead will provide experienced, detailed and technical maintenance support for all levels of maintenance and repairs to the building systems, building equipment and property structures. They will supervise other Maintenance associates on the 2nd shift and be the point person for mechanical issues during the shift.

Requirements

High School diploma or equivalent and/or experience in a hotel or a related field required.
EPA Refrigeration Technician Certification.
Valid Driver’s License.
Associate must, at all times, be attentive, friendly, helpful, and courteous to all guests and fellow associates.
Maintain a professional working relationship and promote open lines of communication with managers, associates, and other departments.
Perform other related duties as assigned.
Ability to safely work in enclosed spaces.
Awareness of and ability to engage any backup equipment.
Ability to follow instructions to utilize Building Automation System (BAS) to quickly transition boilers/chillers/cooling towers back and forth between heating and cooling without damaging equipment.
Knowledge of Safety Data Sheets and safe transport, handling, use and storage of chemicals.
Knowledge of electrical and other Personal Protection Equipment and ability to select proper protection levels.
Advanced knowledge of electrical concepts, relationships, distribution equipment; wire gauges, amps, volts.
Electrical conduit bending and installation.
Ability to work on electrical panels and disconnects up to 480 volts.
Ability to perform pipe work; galvanized and black pipe fitting/threading/installing, cast iron pipe replacement.
Ability to read and understand blueprints, wiring diagrams and equipment schematics.
Have a comfort level in working alone, with others, and on group projects with teams.
Request necessary parts with accurate detailed information.
Diagnose and repair small cleaning equipment.
Proficient in the use of rodding equipment, power hand tools and floor mounted tools.
Able to repair a mechanical window.
Perform and maintain work to local, state, and Federal codes including boilers, electrical and plumbing.

Nice To Haves

At least 10 years of progressive experience in a hotel or a related field preferred.
Trade school and/or College course work in related field preferred.
Previous supervisory experience preferred.
Stationary Engineer License from Chicago or Elgin preferred.
Comfort level with operating and working from a lift up to 40 feet high.
Comprehensive understanding of all building systems with awareness of differences for each portion of the facility.
Training maintenance associates in understanding of the commercial kitchen equipment and systems including ovens, steam kettles, coolers as well as the BAS and mechanical systems, HVAC equipment, electrical and plumbing systems.
Ability to access, evaluate and repair roof exhaust fans.

Responsibilities

Oversee decisions on operating adjustments, operating and maintaining all mechanical, electrical, plumbing and building equipment.
Provide experienced, detailed and technical maintenance support for all levels of maintenance and repairs to the building systems, building equipment and property structures.
Supervise other Maintenance associates on the 2nd shift.
Be the point person for mechanical issues during the shift.
Monitor and supervise the daily operations of department and associates.
Identify opportunities to update or improve department objectives and standard operating procedures and make recommendations to appropriate staff.
Conduct departmental training, departmental meetings developing associate morale and skills.
Prepare knowledge-based documents for training and development of associates.
Motivate, coach and counsel all department personnel according to Q Center Policy.
Ensure training and compliance of all associates on Standard Operating Procedures, Q Center policies, technical tasks and risk management is achieved.
Operate all aspects of the department computer system, including software maintenance, report generation and analysis, and simple programming.
Ensure associates are informed timely and appropriately of any business changes.
Keep immediate supervisor fully informed of all problems or matters requiring their attention.
Respond to all associate and guest requests, problems, complaints and/or accidents presented through various channels, in an attentive, courteous, and efficient manner; follow up to ensure guest and associate satisfaction.
Maintain a clean, organized work area.
Ensure overall associate and guest satisfaction and safety is achieved.
Perform other related duties as assigned.
Monitor all department functions with the ability to handle equipment and building adjustments, keeping immediate supervisor fully informed of all problems or matters requiring their attention.
Interpret equipment gauges information to assess equipment performance and ability to adjust as needed according to the size and type of equipment (steam, water, etc.).
Use analytical reasoning and problem-solving skills to troubleshoot and devise effective repairs to various equipment and systems.
Operate and handle mechanical equipment, such as boilers, hot water heaters, chillers, cooling towers, air handlers, pumps, etc.
Perform preventative maintenance on all HVAC equipment and electrical systems (i.e. boilers, cooling towers, chillers, AHU's, HVAC system, electrical panels, etc.)
Monitor equipment with a knowledge of typical operating pressures, temperatures, flows for refrigerants, water, chillers, boilers, hot water heaters, steam boilers, coolers, etc.
Responsible for boiler cleaning, burner testing, seasonal startups, and overseeing Illinois state inspections.
Make repairs to property HVAC system: change filters, clean coils, replace motors, belts, repair water distribution pumps, etc.
Drain, refill, bleed HVAC closed loop piping systems.
Perform routine run testing of all generators; check batteries, heater, fuel level and perform maintenance.
Have thorough knowledge of HVAC closed loop distribution system layout for each individual building section and associated pump and valve operation; supplies, returns, cold/hot.
Thorough knowledge of all sections of 2 and 4 pipe HVAC systems, location and areas served; adjusting to maximize building temperature and humidity control.
Thorough understanding of all equipment parts and processes to ensure proper function.
Ability to safely work in enclosed spaces.
Awareness of and ability to engage any backup equipment.
Thorough knowledge of system functions and ability to perform complex functions; responding, evaluating and resolving critical alarms received from the Building Automation System.
Ability to follow instructions to utilize Building Automation System (BAS) to quickly transition boilers/chillers/cooling towers back and forth between heating and cooling without damaging equipment.
Thorough knowledge of water softener equipment and operation, including hardness testing and corrective actions.
Take required readings on equipment and act per protocols.
Test water treatment for cooling towers, boilers and chiller and take corrective action per protocols.
Operate water treatment equipment, make necessary chemical adjustments properly handling chemical according to Safety Data Sheets.
Knowledge of Safety Data Sheets and safe transport, handling, use and storage of chemicals.
Replace light switches, receptacles, light bulbs, ballasts, and fixtures as needed.
Knowledge of electrical and other Personal Protection Equipment and ability to select proper protection levels.
Advanced knowledge of electrical concepts, relationships, distribution equipment; wire gauges, amps, volts.
Electrical conduit bending and installation.
Ability to work on electrical panels and disconnects up to 480 volts.
Perform furniture repair and office furniture/workstation installation.
Perform major (HVAC and domestic water lines, etc.) plumbing repairs.
Cutting, joining, and soldering up to ¾” to 6” copper pipe and fixtures.
Cutting, joining, and gluing up to 6” PVC pipe and fixtures.
Ability to perform pipe work; galvanized and black pipe fitting/threading/installing, cast iron pipe replacement.
Ability to read and understand blueprints, wiring diagrams and equipment schematics.
Trace and repair all types of water lines (domestic, HVAC, equipment, sewer, etc.).
Lead in preventative maintenance; advanced evaluation, troubleshooting and repairing commercial kitchen, cleaning, and catering equipment.
Ceiling tile repair and replacement.
Basic knowledge of elevator systems and ability to perform processes as allowed by the designated elevator service company; safe shut down, start up, car access.
Maintain repair and preventative maintenance automated and manual records.
Become proficient in the use of electronic devices (TMA/CMMS) for recording work activity, generating, receiving, and scheduling work orders and preventative maintenance requests.
Troubleshoot and repair guest room electronic lock system.
Complete assigned work orders for general repair within assigned time frame in order to achieve operational efficiency of the property, its safety and its equipment.
Immediately and courteously respond to guests needs in order to repair and resolve room maintenance requests and problems as they arise.
Perform all other maintenance and facility care tasks as requested to assist Q Center as a whole.
Have a comfort level in working alone, with others, and on group projects with teams.
Request necessary parts with accurate detailed information.
Participate in inventory maintenance and periodic counting.
Comprehensive understanding of all building systems with awareness of differences for each portion of the facility.
Diagnose and repair small cleaning equipment.
Training maintenance associates in understanding of the commercial kitchen equipment and systems including ovens, steam kettles, coolers as well as the BAS and mechanical systems, HVAC equipment, electrical and plumbing systems.
Proficient in the use of rodding equipment, power hand tools and floor mounted tools.
Ability to access, evaluate and repair roof exhaust fans.
Able to repair a mechanical window.
Perform and maintain work to local, state, and Federal codes including boilers, electrical and plumbing.