Iron Worker

Turner Construction•San Antonio, TX

4d•Onsite

About The Position

Assemble, erect, connect, and weld steel projects. Fully comprehend scopes of work per plans and specifications to complete job assignment. Assemble hoisting equipment and rigging (e.g., cables, pulleys, and hooks, to move heavy equipment and materials). Bolt aligned structural-steel members in position for permanent riveting, bolting, or welding into place. Drive drift pins through rivet holes to align rivet holes in structural-steel members with corresponding holes in previously placed members. Erect metal and pre-cast concrete components for building structures. Fasten structural-steel members to hoist cables, using chains, cables, or rope. Force structural-steel members into final positions, using turnbuckles, crowbars, jacks, and hand tools. Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members. Pull, push, or pry structural-steel members into approximate positions for bolting into place. Unload and position prefabricated steel units for hoisting and use rope to guide them into position. Verify vertical and horizontal alignment of structural-steel members, using plumb bobs, laser equipment, transits, and/or levels. Cut, bend, and weld steel pieces, using metal shears, torches, and welding equipment. Dismantle structures and equipment as needed. Install fiberglass building insulation, metal cladding, and siding, standing seam roofing, insulated metal panels, windows, passage doors, and overhead doors. Fabricate metal parts such as steel frames, columns, beams, and girders, according to blueprints or instructions from supervisors. Operate equipment including forklifts, backhoe, skid steer, excavator, compactors, and construction hoist. Ensure Trade employees, subcontractors, and vendors to comply with Turner standards, safety codes, regulations, and jobsite security. Display high level of teamwork, integrity, commitment, and leadership in daily operations. Fully understand work instructions, project signage, and safety instructions from tool and equipment manufacturers and prepare and inspect tools prior use to ensure safe and working condition. Participate in daily Pre-Task Plans, follow safety expectations for operation of equipment and tools, select appropriate equipment for performing work, adhere to safety protocols to perform work, and wear appropriate PPE (Personal Protection Equipment). Ensure security of equipment and work area while conducting operations. Identify, communicate, and escalate problems and issues to supervisor for immediate resolution. Track production of completed tasks. Maintain positive working relationships with customers, contractors, suppliers and other employees. Other activities, duties, and responsibilities as assigned.

Requirements

Minimum of 3 years of welding experience required or equivalent combination of education, training, and experience
Structural Welding Certification, as required
Proficient knowledge of materials, methods, and tools involved in construction or repair of buildings or other structures, foundations, and framing
Ability to understand, and interpret construction contract documents, drawings (e.g., shop, structural, blueprints, sketches, and/or building plans), specifications, scopes of work, vendor tags, and project schedule to determine dimensions and materials to execute work activities
Proficient use of related tools to complete work assignments
Knowledge of and able to apply arithmetic and basic geometry to work tasks
Ability to measure, read, and convey lengths with ruler or tape with high degree of accuracy
Able to think critically and use good judgment to solve problems
Ability to take direction, work independently with minimal supervision, and in team environment
Ability to apply active listening skills, ask clarifying questions, and complete assignments as directed
Clear and professional verbal and written communication skills and engage with all levels of teams, clients, business partners, and management
Reliable transportation required
Ability to travel using various modes (e.g., automobile, train, air) and accommodate night and weekend work as needed

Responsibilities

Assemble hoisting equipment and rigging (e.g., cables, pulleys, and hooks, to move heavy equipment and materials).
Bolt aligned structural-steel members in position for permanent riveting, bolting, or welding into place.
Drive drift pins through rivet holes to align rivet holes in structural-steel members with corresponding holes in previously placed members.
Erect metal and pre-cast concrete components for building structures.
Fasten structural-steel members to hoist cables, using chains, cables, or rope.
Force structural-steel members into final positions, using turnbuckles, crowbars, jacks, and hand tools.
Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members.
Pull, push, or pry structural-steel members into approximate positions for bolting into place.
Unload and position prefabricated steel units for hoisting and use rope to guide them into position.
Verify vertical and horizontal alignment of structural-steel members, using plumb bobs, laser equipment, transits, and/or levels.
Cut, bend, and weld steel pieces, using metal shears, torches, and welding equipment.
Dismantle structures and equipment as needed.
Install fiberglass building insulation, metal cladding, and siding, standing seam roofing, insulated metal panels, windows, passage doors, and overhead doors.
Fabricate metal parts such as steel frames, columns, beams, and girders, according to blueprints or instructions from supervisors.
Operate equipment including forklifts, backhoe, skid steer, excavator, compactors, and construction hoist.
Ensure Trade employees, subcontractors, and vendors to comply with Turner standards, safety codes, regulations, and jobsite security.
Display high level of teamwork, integrity, commitment, and leadership in daily operations.
Fully understand work instructions, project signage, and safety instructions from tool and equipment manufacturers and prepare and inspect tools prior use to ensure safe and working condition.
Participate in daily Pre-Task Plans, follow safety expectations for operation of equipment and tools, select appropriate equipment for performing work, adhere to safety protocols to perform work, and wear appropriate PPE (Personal Protection Equipment).
Ensure security of equipment and work area while conducting operations.
Identify, communicate, and escalate problems and issues to supervisor for immediate resolution.
Track production of completed tasks.
Maintain positive working relationships with customers, contractors, suppliers and other employees.
Other activities, duties, and responsibilities as assigned.