Inspector - MCO

Frontier Careers • Orlando, FL

4d • Onsite

About The Position

Performs inspection functions according to Frontier's Continuous Airworthiness Maintenance Program (CAMP) and FAA Regulations to ensure flight safety and airworthiness of Frontier aircraft. This role involves ensuring compliance with approved published procedures, performing various types of inspections, monitoring maintenance and materials, auditing aircraft records, and actively participating in the improvement of the CAMP. The Inspector also assists with vendor audits, conducts on-the-job training, and ensures the accuracy and completeness of all work documents and records. Maintaining familiarity with company manuals and safety regulations is crucial. The role also includes responsibilities related to tool control, calibration, and evaluation of equipment for training purposes.

Requirements

• Current Airframe & Powerplant Certificate; must have possessed an A&P Certificate for at least 5 years
• Previous and verifiable (OJT/training records/certificates, etc.) Inspection experience to include: RII Authorization, Designated Inspection Authorization, NDT Inspections (to include Eddy Current (ET), Liquid Penetrant (PT), & Ultrasonic (UT) Methods) and Borescope experience
• Minimum 3 years of verifiable (OJT/training records/certificates, etc.) experience performing maintenance checks, engine changes, gear changes, structural repairs, flight control rigging, etc. on large aircraft operated under Part 121 or 135
• Must be Fleet Qualified on Frontier's aircraft
• Ability to acquire, hold, maintain, and execute Required Inspection Item (RII) authorization
• Must have a current US Passport or shall be able to obtain a US Passport within 3 months of assignment in the Inspection department and be willing to travel to provide quality oversight on Frontier Airlines aircraft
• Vision must meet a minimum requirement of 20/25 corrected or uncorrected
• Ability to acquire, hold, and maintain Borescope Inspection capabilities and execute Borescope inspections as required
• Ability to acquire, hold, maintain, and execute Level 1 Special/Level I NDT certification in Eddy Current (ET), Liquid Penetrant (PT), & Ultrasonic (UT) Methods
• Shall acquire, hold, maintain and execute Level II NDT certification in Eddy Current (ET), Liquid Penetrant (PT), & Ultrasonic (UT) Methods after having held NDT Level I Certification for 3 years
• When directed by management acquire, hold, maintain and execute Level III NDT certification in Eddy Current (ET), Liquid Penetrant (PT), & Ultrasonic (UT) Methods after having held NDT Level II Certification for 5 years
• Ability to complete (and pass) differences training
• Ability to acquire, hold, maintain and execute the use of a valid motor vehicle driver's license
• Must demonstrate behavior that portrays the company core values of Safety, Respect, Trust, Collaboration, Value, and Passion while communicating with personnel and acting on behalf of the company.

Nice To Haves

• The Director, Quality Assurance/Chief Inspector may waive any one or more of these requirements if experience level is comparable and deemed acceptable.

Responsibilities

• Always follow (never deviate from) approved published procedures unless proper deviation approval is authorized.
• Perform proper Required Inspection Item (RII) inspections and documentation thereof in accordance with Frontier's Continued Airworthiness Maintenance Program (CAMP) and FAA Regulations.
• Perform C-Check, line maintenance/RON, and receiving inspections.
• Perform light and/or intricate cleaning as required or directed by supervisor of the department.
• Monitor maintenance, workmanship and materials to verify compliance with applicable approved published procedures (Frontier Airlines and FAA rules, regulations and standards, etc.).
• Perform on-site quality control monitoring of work performed on company aircraft.
• Audit completed aircraft records (e.g., logbook pages, work cards, non-routines, Engineering documents (EOs, EAs, etc.) and other related documents) generated by C-Check, RON and Line Maintenance.
• Monitor the proper completion of aircraft records (e.g., logbook pages, work cards, non-routines, Engineering documents (EOs, EAs, etc.) and other related documents) during C-Check, RON and line maintenance.
• Actively participate in the improvement of Frontier's CAMP by identifying concerns and providing documented suggestions for resolution.
• Assist Receiving Inspection, conduct periodic inspections and audits of vendors, line stations, and contract overhaul agencies.
• Perform On-The-Job Training (OJT) in various functions such as NDT, RII, borescope, and receiving inspection as required or directed from supervisor of the department.
• Ensure accuracy and completeness of all assigned work documents and records.
• Maintain currency on all revisions to company manuals.
• Research all pertinent information and material for work scheduled on aircraft.
• Make FMIS entries as required.
• Follow all safety rules and regulations in order to maintain a safe working environment for all employees.
• Maintain cleanliness of maintenance areas at all times.
• Ensure a “clean as you go” job ethic is adhered to.
• Ensure that all maintenance areas meet good “housekeeping” standards.
• Ensure that all tools (both personal and company owned) are removed from the aircraft, aircraft engines, appliances and components.
• Always maintain positive tool control accountability.
• Immediately report lost and/or found tools to management.
• Assist in the daily (after each shift) cleanup of Inspection work areas and other areas as required or directed by Supervisor of the department.
• Follow the company's guidelines provided in Frontier's Employee Handbook, exception being those specific areas governed by a collective bargaining agreement.
• Maintain familiarization with the training requirements necessary as defined in the GMM 100: Maintenance Training Program and ensure training is current prior to performing the functions and tasks of this position.
• Receive tools returned from calibration vendors.
• Ensure proper data concerning calibrated tooling is entered in FMIS.
• Assist in the evaluation of new tooling.
• Ensure lost and/or found tools are addressed in accordance with the current policies and procedures.
• Evaluate aircraft equipment, tooling, and support equipment for new training topics per GMM 100.01: Maintenance Training General Information.
• Perform other duties as required or directed from supervisor of the department.

Benefits

• Flight benefits for you and your family to fly on Frontier Airlines.
• Buddy passes for your friends so they can experience what makes us so great.
• Discounts throughout the travel industry on hotels, car rentals, cruises and vacation packages.
• Discounts on cell phone plans, movie tickets, restaurants, luggage and over 2,000 other vendors.
• Paid holidays
• 401(k) plan
• Vacation/sick time
• Medical/dental/vision insurance that begins the 1st of the month following your hire date.

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level
• Education Level: High school or GED