Hardware Test Engineer

American IT Systems•San Jose, CA

About The Position

The Hardware Test Engineer executes and automates validation tests for electric vehicle charging equipment and related energy systems. The role covers functional, power delivery and sharing, interoperability, thermal, efficiency, fault response, back-end (OCPP), and reliability testing across vendors’ charging equipment. Testing uses fleet vehicles or EV/battery emulators as specified by the test plan, with coordination of vehicle availability through Operations. The engineer collects measurements and logs, documents pass/fail results with supporting evidence, tracks defects through vendor root-cause analysis and fixes, runs regression tests, and monitors uptime, connectivity, and session-success KPIs. The role also develops documented, version-controlled, vendor-agnostic scripts and data-processing tools to automate repeatable tests and compare results with pass/fail limits. As a secondary responsibility, the engineer supports test-site setup, instrumentation calibration, network and data-logging setup, vendor commissioning, and reusable site documentation. The position requires safe hands-on work with high-voltage DC and 480 VAC three-phase equipment, adherence to high-voltage safety procedures and lockout/tagout, and stopping any unsafe test.

Requirements

  • Bachelor of Science in Electrical, Electronics, or Computer Engineering, or equivalent experience.
  • At least 3 years of hardware test or validation experience with power electronics, EV charging, or energy systems.
  • Safe hands-on experience with high-voltage DC and 480 VAC three-phase equipment.
  • Experience using power analyzers, oscilloscopes, current and voltage probes, thermal cameras, and data acquisition (DAQ) systems.
  • Python or similar scripting experience for test automation and data analysis.
  • Experience with Git.

Nice To Haves

  • Experience with DCFC protocols and standards, including CCS, NACS (SAE J3400), ISO 15118 / DIN 70121, OCPP, and UL 2202 / IEC 61851.
  • Experience with EV/battery emulators or CharIN conformance testing.

Responsibilities

  • Execute prioritized test cases (P0, then P1, then P2) on charging equipment from any vendor, covering functional, power delivery and sharing, interoperability, thermal, efficiency, fault response, back-end (OCPP), and reliability testing.
  • Coordinate vehicle availability with Operations and conduct tests using fleet vehicles or EV/battery emulators as specified in the test plan.
  • Collect measurement data and logs from power analyzers, thermal cameras, thermocouples, chargers, vehicles, and OCPP systems; report pass/fail results with evidence using the standard report template.
  • Log defects with reproduction steps and supporting data, follow them through vendor root-cause analysis and fixes, and run regression tests.
  • Track uptime, connectivity, and session-success KPIs against their targets.
  • Write scripts to automate repeatable test-plan cases, such as OCPP-driven session sequences, multi-session power-sharing runs, endurance cycles, and KPI calculations.
  • Build data-processing tools that combine instrument and log data and calculate results against pass/fail limits.
  • Keep test tools vendor-agnostic, version-controlled, and documented.
  • Support new test-site setup for selected hardware, including instrumentation installation and calibration, network and data-logging setup, and witnessing vendor commissioning.
  • Maintain a reusable test-site bring-up checklist and test setup diagrams.
  • Follow high-voltage safety procedures, lockout/tagout, and site rules, and stop any test that is unsafe.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service