GENERAL OPERATOR II-1st Shift

LISI Aerospace•City of Industry, CA

3d•Onsite

About The Position

The General Operator II is responsible for performing basic set-ups, operating production machines, and accurately measuring products to meet company targets and standards. This role requires the ability to set up and operate secondary production machines including Drill, Milling, Trim, Tapping, Crimping, Vision, Stamping, Marking, Deburr, Manual Punch Press, EDM, and Auto Assembly. The General Operator II must maintain the expected level of competency for production machines as assessed.

Requirements

High school diploma or general education degree (GED).
1 – 4 years related industrial manufacturing experience or equivalent combination of education and experience.
Ability to read and interpret blueprints or other job specifications.
Knowledge of basic computer skills and departmental applications: SPC & Shop Floor System.
Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence.
Ability to effectively present information in one-on-one and small group situations.
Ability to add and subtract six digit numbers and to multiply and divide with 10’s and 100’s.
Ability to perform calculations using units of measurement, weight, volume, and distance.
Ability to comprehend detailed but uninvolved written or oral instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
Must be able to stand for extended periods of time.
Must be able to use hands to finger, handle, or feel; requires repetitive hand movement and manual dexterity.
Must frequently bend, reach to shoulder level and lift, carry, push and/or pull up to 30 pounds.
Specific vision abilities required include close vision, distance vision, and ability to adjust focus.
Hearing level within normal/average range.
Must wear personal safety equipment such as safety glasses, hearing protection, or proper footwear PPE in specified areas.

Nice To Haves

Has clear understanding and perform following SOP (Standard Operating Procedures), work instructions, SPC, and/or special requirements if applicable, including but not exclusive to: Drill, Milling, Trim, Tapping, Crimping, Vision, Stamping, Marking, Deburr, Sorting and Assembly.
Assists less-skilled operators to develop skills and set-ups.
Understands work flows and procedures.
Comprehends manufacturing processes and methods including flow, layout, assembly and production equipment.
Communicates technical documents clearly and accurately; Transfers technical data into meaningful written documents that can be understood by all levels of the organization.
Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests.
Understands business implications of decisions; Aligns work with strategic goals.
Works within the direction of the department’s resources; Contributes to profits and revenue; Conserves organizational resources.
Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans.
Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.
Participate in the development and promotion of the HSE culture.
Be exemplary in terms of health, safety and the environment, in particular by: Respecting and ensuring respect for the instructions and rules established in the field of health, safety and the environment (in particular the LISI golden rules).
Immediately correcting, whenever possible, or reporting to his or her superiors and/or the HSE department, any malfunction or risky situation in the fields of health, safety and environmental protection.
Implementing preventive actions to reduce the environmental footprint and control health and safety risks.
Participate, upon request, in analyses (of risks, incidents) and HSE working groups related to his/her professional scope.
Be familiar with the main health and safety risks and the main environmental impacts relating to the scope of his/her work.
Be familiar with the site's HSE policy and objectives.
To be able to make proposals for improving working conditions and limiting environmental impact.

Responsibilities

Performs basic set-ups and tooling changes and operates secondary production machines after JSA training.
Understands and performs Standard Operating Procedures (SOPs), work instructions, SPC, and special requirements for machines such as Drill, Milling, Trim, Tapping, Crimping, Vision, Stamping, Marking, Deburr, Sorting, and Assembly.
Recognizes and remedies minor machine or tooling malfunctions, making minor adjustments as necessary, and reporting major discrepancies to lead or supervisor.
Observes machine operation to detect workpiece defects or malfunctions.
Reads blueprints or Manufacturing Orders (MOs) for product specifications including dimensions, tolerances, number of parts to be formed, and tooling instructions.
Inspects products using calipers, micrometers, comparators, scales, templates, or other measuring instruments to verify conformance to specifications.
Records information such as first article inspection, in-process inspection, number of products tested, meter readings, and dates/times of production; performs SPC as required.
Recognizes cosmetic non-conformances based on company specifications (e.g., burrs, galling, cracked edges, slug marks, dimensional changes) and initiates action to prevent them by stopping the machine and notifying the Lead person or Supervisor.
Operates Shop Floor System and records MO information.
Performs minor machine maintenance, including changing worn accessories, oiling and cleaning machines, dies, or parts, and adding coolant.
Reports all malfunctioning equipment and non-conforming parts to Lead or Supervisors.
Performs record keeping, data entry, housekeeping, and follows safety regulations.
Assists less-skilled operators in developing skills and set-ups.
Complies with rules and regulations set by Federal, Local, and State government, LISI Aerospace, and HSE Procedures.
Follows all 5S department procedures, including keeping floors clean, returning tools to proper locations, organizing part pans, and performing other housekeeping duties.
Attends all provided training and adheres to all HSE procedures, policies, and plans, conforming to reporting requirements and safe operating procedures.
Immediately reports any known or suspected nonconformance for all company procedures or legal requirements to management.
Seeks opportunities to improve HSE performance by establishing objectives and targets, measuring progress, and reporting results.
Works under recommended waste elimination initiatives, such as recycling opportunities, to eliminate or minimize production waste.
Performs a variety of other related duties as assigned.