Field Service Technician, Electrical Testing

Premise•Minneapolis, MN
•Onsite

About The Position

Premise Inc. is seeking an experienced Field Service Technician, Electrical Testing to perform electrical testing, inspection, troubleshooting, and commissioning on utility-scale solar farms, battery energy storage systems, transformers, switchgear, and associated low- and medium-voltage electrical systems. The technician independently plans and carries out testing, configures and operates test equipment, interprets results, troubleshoots failures, recommends corrective actions, and prepares testing and turnover documentation. During the first 6–12 months, approximately 50%–70% of the workload will focus on electrical testing, commissioning, and QA/QC, with approximately 30% dedicated to troubleshooting and operations and maintenance support. When testing is not scheduled, the technician will assist with switchgear and transformer terminations and other technical field-service needs, consistent with qualifications and applicable licensing requirements. The position initially supports projects in Illinois and Minnesota and involves travel between assigned project locations, overnight stays when required, and overtime during testing, commissioning, outage, or closeout periods. Work is primarily at active construction sites and operating facilities, often outdoors and near energized or potentially energized equipment. Emergency-call responsibilities are not anticipated at the start but may be introduced as the service offering expands.

Requirements

  • Three or more years of hands-on experience in electrical testing, commissioning, power-system field service, or industrial electrical maintenance.
  • Demonstrated experience with medium-voltage electrical systems and equipment.
  • Hands-on experience performing primary-injection testing.
  • Hands-on transformer-testing experience, including turns ratio, insulation-resistance, winding-resistance, and power-factor or Doble testing.
  • Experience testing and inspecting switchgear and circuit breakers.
  • Experience with protective-relay testing, calibration, functional testing, or settings verification.
  • Ability to independently develop testing plans, select and configure equipment, execute tests, interpret results, troubleshoot failures, recommend corrective actions, and complete final testing reports.
  • Ability to interpret test data and identify equipment deficiencies or abnormal results.
  • Ability to read and apply one-line diagrams, schematics, construction drawings, equipment manuals, project specifications, and test procedures.
  • Ability to produce accurate test reports and turnover documentation using project-specific forms and customer requirements.
  • Working knowledge of NFPA 70E electrical-safety practices, energized-work controls, arc-flash boundaries, and lockout/tagout procedures.
  • Proficiency with common electrical test instruments, including Megger, Doble, Omicron, or equivalent equipment.
  • Ability to use Microsoft Excel and electronic systems to enter test data, organize results, and prepare reports.
  • Valid driver’s license and ability to travel to active project sites.
  • Ability to work independently in the field and communicate effectively with construction, engineering, QA/QC, operations and maintenance, and project-management teams.
  • Ability to lift and carry up to 50 pounds, with or without reasonable accommodation.

Nice To Haves

  • NETA Level II or III certification or comparable hands-on electrical field-testing experience.
  • A current electrical license issued by Minnesota, Illinois, Wisconsin, or another state.
  • Experience performing VLF cable testing.
  • Experience with tan delta and hipot testing.
  • Experience performing grounding-system testing.
  • Experience working with 5 kV, 15 kV, 25 kV, 34.5 kV, or 35 kV electrical systems.
  • Experience in utility-scale solar, BESS, substations, wind energy, utilities, industrial facilities, data centers, or another comparable power-distribution environment.
  • Experience with SEL, GE, Schneider Electric, or comparable protective-relay and control systems.
  • Experience with PowerDB, relay-testing software, manufacturer-specific test-set software, or other electronic reporting platforms.
  • Associate degree in Electrical Power and Controls, Electrical Technology, or a related discipline; relevant military power-generation or electrical training may substitute.
  • OSHA 10 or OSHA 30 certification.
  • Current NFPA 70E training.
  • CPR and First Aid certification.
  • Experience leading field-testing activities or coordinating equipment-energization readiness.
  • Previous experience with PowerDB or similar platforms; this is beneficial but not a prerequisite.

Responsibilities

  • Develop and execute electrical testing plans based on project specifications, customer requirements, equipment documentation, and applicable standards.
  • Select, configure, and safely operate appropriate test equipment.
  • Perform primary-injection testing on electrical equipment and systems.
  • Perform transformer testing, including turns ratio, insulation-resistance, winding-resistance, and power-factor or Doble testing.
  • Inspect and test switchgear, circuit breakers, instrument transformers, and related power-distribution equipment.
  • Perform protective-relay testing, calibration, functional testing, and settings verification.
  • Interpret test data and identify abnormal results, failures, or deficiencies.
  • Troubleshoot failures, recommend corrective actions, and retest to confirm successful resolution.
  • Support acceptance testing and commissioning of low- and medium-voltage electrical systems.
  • Perform or support VLF cable testing, tan delta testing, hipot testing, grounding-system testing, and related diagnostics based on experience and project requirements.
  • Support equipment energization, startup, and commissioning activities.
  • Review one-line diagrams, electrical schematics, construction drawings, equipment submittals, project specifications, and customer closeout requirements.
  • Prepare accurate and timely test reports, turnover packages, deficiency logs, corrective-action records, and customer-specific documentation.
  • Coordinate testing schedules, outage windows, site access, and energization readiness with project and customer stakeholders.
  • Provide technical support for QA/QC, troubleshooting, operations and maintenance, field service, and project closeout as workload requires.
  • Assist with switchgear and transformer terminations when testing is not scheduled and when permitted by qualifications and licensing requirements.
  • Maintain test instruments, equipment records, and calibration documentation.
  • Follow approved procedures and electrical-safety, arc-flash, lockout/tagout, and project-specific requirements.
  • Travel between assigned project locations, stay overnight when required, support planned outage work, operate an assigned vehicle when authorized, and transport testing equipment and materials as assigned.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service