Facilities Maintenance Technician 3rd Shift

The Ohio State University

3d•Onsite

About The Position

Under the general supervision of a senior technician or supervisor, the facilities maintenance technician performs intermediate tasks related to day-to-day inspections, preventative maintenance and repair of buildings and equipment. Functions will include but are not limited to: daily inspections, installations, general maintenance (plumbing, electrical, carpentry, HVAC) and repairs. Responds to emergency situations and evaluates and corrects defects. May assist lower level facilities technicians. Assists other trades as needed; adheres to all safety practices and procedures; cleans and maintains work areas and equipment; attends meetings; properly completes documentation; provides a high level of customer service; communicates to customers, coworkers and supervision via written, electronic and verbal methods and devices; operates department vehicle; performs other duties as assigned. Actively supports our commitment to the university value of acting with integrity and personal accountability to establish a culture of professionalism in the workplace. Shift, hours, days, and/or location are subject to change based on operational need in accordance with the collective bargaining agreement; may work overtime; subject to 24 hour emergency call.

Requirements

High school diploma/GED or equivalent combination of education and experience.
Two years’ experience in general maintenance or equivalent combination of education and experience.
Obtain a valid OSHA 10-hour General Industry Safety and Health card within the probationary period.
Demonstrated competence in each of the identified technical specialties as required for this position’s level of responsibility: carpentry, electrical, plumbing, and HVAC/R upon successful completion of the probationary period.
Ability to read, understand and update blueprints, schematics and as built drawings.
Ability to read, understand and apply safety standards and practices (e.g., hazard communication, infection, prevention, lock-out/ tag-out).
Ability to read, interpret and apply technical manuals and systems specifications.
Ability to follow applicable trade specific codes, standards and regulations.
Ability to learn technical skills and apply new knowledge to solve problems.
Ability to select and use hand, power and machine tools.
Ability to maintain a clean and safe work environment.
Ability to add, subtract, multiply and divide whole numbers; calculate fractions, decimals and percentages; use algebra, geometry and trigonometry.
Ability to locate, disable and enable electrical disconnects and plumbing shut-offs.
Ability to instruct others to perform a task.
Ability to provide guidance and expert advice about technical systems or processes.
Problem solving skills.
Conflict management skills (e.g. handle complaints, identify issues and negotiate with others).
Computer skills (e.g., data entry, data retrieval, electronic communication, internet searches, navigate and retrieve information from websites, create basic reports using Microsoft Word).
Customer service skills (e.g. demonstrate empathy, meet quality standards, actively look for ways to help others).
Brazing and soldering skills.
Planning and prioritizing work skills.
Resource management skills.
Troubleshooting skills (e.g. plumbing systems, HVAC/R systems, electrical circuits).
Knowledge of chilled water and hot water systems integration and operation.
Knowledge of air flow principles, tools and techniques.
Knowledge of the relationship of preventive maintenance and equipment life-cycle.
Knowledge of building automation systems and controls.
Knowledge of AC/DC theory.

Nice To Haves

Associates/technical degree or certificate in skilled trades/maintenance related field.
Basic understanding of university building design standards (BDS) related to the maintenance and repair of building systems and equipment.
Basic understanding of the capital project process as managed by FOD Design and Construction.

Responsibilities

Performs intermediate tasks related to day-to-day inspections, preventative maintenance and repair of buildings and equipment.
Conducts daily inspections, installations, general maintenance (plumbing, electrical, carpentry, HVAC) and repairs.
Responds to emergency situations and evaluates and corrects defects.
Assists lower level facilities technicians.
Assists other trades as needed.
Adheres to all safety practices and procedures.
Cleans and maintains work areas and equipment.
Attends meetings.
Properly completes documentation.
Provides a high level of customer service.
Communicates to customers, coworkers and supervision via written, electronic and verbal methods and devices.
Operates department vehicle.
Installs/removes fixtures (e.g., bulletin boards, clocks, pictures, coat hooks, signs).
Installs/repairs shelves, ceiling tiles, drywall, flooring and trim.
Paints and patches walls.
Assembles, installs, repairs and replaces dispensers, beds, furniture, doors, and associated hardware.
Repairs fire wall penetrations.
Repairs fire doors and related hardware.
Installs/repairs various electrical equipment, including but not limited to: light fixtures, electrical outlets, switches, appliances, controls and motors.
Repairs 1 phase motors.
Retrofits lighting fixtures.
Resets breakers.
Replaces fuses.
Resolves local power outages.
Locates local electrical disconnects.
Performs basic preventative maintenance on electrical systems and equipment.
Responds to electrical emergencies.
Performs intermediate and complex preventative maintenance on electrical systems and equipment.
Repairs/installs plumbing equipment (e.g., toilets, sinks, showers).
Repairs/installs plumbing components (e.g., supply lines, mixing valves, traps, pipes).
Tests eye wash stations and emergency showers.
Resolves water temperature (e.g., too hot, too cold) requests.
Unclogs drains (e.g., sink, shower, floor).
Repairs/replaces water fountains.
Replaces damaged/missing piping insulation.
Locates local water shut-off valves.
Performs intermediate and complex preventative maintenance on plumbing systems and equipment.
Responds to plumbing emergencies.
Responds to and assesses room temperature (e.g., too hot, too cold) requests.
Repairs/replaces thermostats.
Calibrates/programs thermostats.
Cleans external ducts, cooling towers, air dampers, condensers, evaporator coils, etc.
Replaces room unit motors and filters.
Repairs and replaces HVAC components (e.g., actuators, fan blades, pump seals, bearings).
Performs intermediate and complex preventative maintenance on HVAC/R systems and equipment.
Ensures areas are in compliance with applicable codes.
Documents regulatory compliance tests.
Becomes knowledgeable of equipment and utilities and transfers that knowledge to other staff.
Locates, identifies, disables and enables local utility shut-offs.
Updates building drawings.
Troubleshoots and resolves field problems.
Participates on emergency response teams.
Documents labor, materials and work performed on work orders.
Provides feedback on materials.
Informs customers when tasks are completed.
Communicates and initiates work order escalation, if needed.
Requests equipment and materials required to perform tasks.
Participates in professional development/ continuing education activities: obtaining and maintaining required certifications, soft skill development, etc.
Interacts with and assists other areas and staff within the department.
Participates in meetings, trainings, orientation.
May participate on committees.
Performs other duties as assigned.