3rd Shift Maintenance Tech - $31.30/hour

Campbell's•Ashland, OH

10d•$31•Onsite

About The Position

The Facilities Maintenance Technician is responsible for maintaining equipment and facilities to operate in the safest and most productive condition, supporting continuous improvement, production strategies and plant reliability of equipment and building systems. This role involves adhering to governmental regulatory programs and policies, plant and maintenance department safety procedures, and good manufacturing practices (GMPs). The technician will maintain and use appropriate personal protective equipment (PPE) and attend training to maintain skill levels. They will also make improvements and suggestions to optimize the maintenance program, execute and document work findings via a computerized maintenance management system (CMMS), and perform repairs and installations of parts, tools, and equipment. Fabrication or modification of machines, tools, or equipment may also be required. The role includes performing Preventative Maintenance (PM), inspections, corrective repairs, and special projects/equipment rebuilds, as well as executing and resolving equipment breakdowns/repairs. Leveraging methodologies such as root cause analysis (RCA), break down failure analysis (BDA), and cause maps to identify and resolve equipment issues is expected. The technician will utilize predictive maintenance technologies (ultrasound, thermal imaging, oil analysis, vibration analysis) to identify failures and take corrective actions, documenting the cause of failure and collaborating with the team to prevent reoccurrence. Understanding and interpreting technical documents and diagrams is crucial. The role also involves maintaining and repairing facility/utility systems (mechanical, electrical, building systems, water heater/boiler, steam, chilling system, electric power, gas, compressed air), HVAC systems, refrigeration, instrumentation, elevator maintenance, painting, plumbing, carpentry, grounds keeping, and mechanical repairs (pumps, motors). Testing, repair, and replacement of fire alarm, fire sprinkler, smoke detector, and emergency lighting systems may also be required. Plumbing fixture repair, replacement, and rebuilding, as well as cleaning and replacing traps, drains, faucets, and toilets, and basic wall repair are part of the duties. Handling plant waste, both hazardous and non-hazardous, in compliance with regulations is also a responsibility. Other duties may be required as needed.

Requirements

High School Diploma or GED
A minimum of 2 years of experience in a manufacturing facility performing mechanical and electrical inspections, troubleshooting and repairs
Pass plant specific maintenance test required

Nice To Haves

Some college or formal technical school education with demonstrated aptitude and skills in mechanical, electrical, pneumatic, carpentry, plumbing, and welding techniques.
Ability to deal with problems involving variables in standardized situations
Two years in food manufacturing environment experience

Responsibilities

Understands and adheres to governmental regulatory programs and policies, including National Electrical Code, Environmental Protection Agency (EPA), Uniform Building Code (UBC) and local government environmental agency policies.
Practices and complies with all plant and maintenance department safety procedures, including Lock-Out - Tag-Out; Arc Flash and Hot Work Permits.
Understands the concept of Permit Required Confined Spaces and assists with proper alternate entry of re-classified confined spaces when necessary.
Follows all applicable good manufacturing practices (GMP's) for area assigned.
Maintains and uses appropriate personal protective equipment (PPE) in accordance with Occupational Safety and Health Administration (OSHA), food handling before and after equipment inspection and repair activities.
Attends classes, seminars, and in-house training as needed to maintain skill level with changes in the industry.
Makes improvements and suggestions to optimize maintenance program.
Executes and document planned and unplanned work findings and data during shift via computerized maintenance management system (CMMS).
Repairs and installation of parts, tools and equipment. Fabricates or modifies machines, tools, or equipment to manufacture new products or improve existing products.
Performs Preventative Maintenance (PM), inspections, corrective repairs, special projects/equipment rebuilds.
Performs execution and resolution of equipment breakdowns/repairs.
Leverages methodologies including, but not limited to: root cause analysis (RCA), break down failure analysis (BDA) and cause maps to identify and resolve equipment issues.
Utilizes predictive maintenance technologies to identify failures and takes correct follow-up actions. Predictive maintenance technologies include ultrasound, thermal imaging, oil analysis, and vibration analysis.
Documents the cause of the failure and works with maintenance team, planner, supervisor, or other team members to take action to prevent a reoccurrence of the failure.
Understands and interprets technical documents and diagrams which include but are not limited to: factory manuals, blueprints, schematics, Single Line Electrical Drawings, mechanical and electrical equipment schematics, pneumatics, hydraulics, and Process and Instrumentation Diagrams (P&ID’s), and etc.
Maintains and repairs facility/utility systems such as mechanical, electrical, building systems, water heater/boiler, steam, chilling system, electric power, gas, or compressed air required for operations.
Executes PMs and repairs to Heating, Ventilation and Air Conditioning (HVAC) systems, refrigeration, instrumentation, elevator maintenance, painting, plumbing, carpentry, grounds keeping and mechanical repairs - pumps, motors systems.
May be required to perform tests, repair and replacement of fire alarm, fire sprinkler, smoke detector, emergency and exit sign lighting system and report any malfunctions to supervisor.
Repairs, replaces and/or rebuilds plumbing fixtures and connections.
Cleans and replaces traps, drains, vents and drain lines, faucets, and toilets, basic wall board repairs, including wall board installation.
Handles plant waste, both hazardous and non-hazardous, in a manner which will ensure compliance with local, state, federal, and EPA regulations.
May perform other duties as required.