Electronics Technician Maintenance II CBSP (SATCOM)

Centurum • San Diego, CA

75d • $44 - $52 • Onsite

About The Position

The Electronics Technician Maintenance (ETM) II applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers' manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required, from a supervisor or higher-level technician.

Requirements

• Completed formal system-specific training on either the Unit Level Variant (ULV) AN/USC-69(v)3/A(v)3/B(v)3/C(v)3 or Force Level Variant (FLV) AN/USC-69(v)2/A(v)2.
• Complete understanding of electrical safety, raw AC/DC power handling, and Hazards of Electromagnetic Radiation to Personnel (HERP/RF radiated power) protection.
• Ability to read, interpret, and execute steps in System Operational Verification Test (SOVT) documents, including all safety and security measures.
• Proficiency in reading and interpreting shipboard installation drawings, including Installation Requirements Drawings (IRD), Ship Installation Drawings (SID), Ship Alterations (SHIPALT), and Liaison Action Requests (LAR).
• Demonstrated experience with shipboard hardware installation, high-standard cable management, and conducting thorough physical inspections (checking for cable damage, correct labeling, and secure equipment mounting).
• Hands-on proficiency in configuring and verifying settings on Cisco routers and network switches.
• Experience configuring and managing cryptographic equipment, specifically the KG-175 TACLANE.
• Solid understanding of networking protocols, including TCP/IP, basic routing, Access Control Lists (ACLs), and Virtual Private Networks (VPNs).
• Familiarity with core cybersecurity principles, the purpose and application of Security Technical Implementation Guides (STIGs), and standard vulnerability scans.
• Understanding SATCOM architecture (ship/shore), SATCOM modem settings.
• Ability to deliver detailed technical documentation and final system status reports upon project completion to ensure smooth cross-functional handoffs.
• Competent in operating a Digital Multimeter for basic AC (single-phase and 3-phase) and DC power verifications, alongside DC-bias troubleshooting of sub-level electronic components.
• Competent in operating a Spectrum Analyzer: Setup and display the Signal Of Interest (SOI), interpret reference levels, bandwidth, Carrier-to-Noise (□(C/N)) ratios, distinguish between dBm and dB readings, and perform/analyze Insertion Loss (□(S_□21 )) and Voltage Standing Wave Ratio (VSWR) measurements.
• Competent in operating a Bit Error Rate Tester (BERT): Clear understanding of the differences between Serial and Ethernet BERT, with the ability to configure and utilize Serial and/or Ethernet BERT to troubleshoot active SATCOM links.
• Competent in operating a LAN Cable Tester: Capability to test Ethernet cables for proper pinout, continuity, and wiring verification.
• Proficient with terminal emulators (e.g., PuTTY, Tera Term) and GUI-based management interfaces to configure and diagnose routers, modems, and Ethernet switches.
• HS Diploma
• Must be able to communicate effectively in English, both verbally and in writing.
• Must be able to interface effectively with all levels of technical and management personnel.
• Must have and maintain a Secret US DoD security clearance.

Nice To Haves

• Direct, hands-on experience or familiarity with the Satellite Terminal (Transportable) non-geostationary (STtNG) Increment 1.
• Demonstrated experience performing shipboard testing, specifically including the execution of System Operational Verification Tests (SOVT).
• Proven experience supporting Navy modernization initiatives, installation cycles, and system upgrades for C4I systems.
• Hands-on experience configuring and maintaining Virtual Cisco Routers.
• Possession of current CompTIA Security+, CompTIA Network+, and CCNA certifications.

Responsibilities

• Applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers' manuals or similar documents.
• Works under immediate supervision and achieves technical guidance, as required, from a supervisor or higher-level technician.
• Demonstrates complete understanding of electrical safety, raw AC/DC power handling, and Hazards of Electromagnetic Radiation to Personnel (HERP/RF radiated power) protection.
• Reads, interprets, and executes steps in System Operational Verification Test (SOVT) documents, including all safety and security measures.
• Reads and interprets shipboard installation drawings, including Installation Requirements Drawings (IRD), Ship Installation Drawings (SID), Ship Alterations (SHIPALT), and Liaison Action Requests (LAR).
• Demonstrates experience with shipboard hardware installation, high-standard cable management, and conducting thorough physical inspections (checking for cable damage, correct labeling, and secure equipment mounting).
• Configures and verifies settings on Cisco routers and network switches.
• Configures and manages cryptographic equipment, specifically the KG-175 TACLANE.
• Understands networking protocols, including TCP/IP, basic routing, Access Control Lists (ACLs), and Virtual Private Networks (VPNs).
• Familiarity with core cybersecurity principles, the purpose and application of Security Technical Implementation Guides (STIGs), and standard vulnerability scans.
• Understands SATCOM architecture (ship/shore) and SATCOM modem settings.
• Delivers detailed technical documentation and final system status reports upon project completion to ensure smooth cross-functional handoffs.
• Operates specialized tools to troubleshoot SATCOM links and electronic components, including Digital Multimeter, Spectrum Analyzer, Bit Error Rate Tester (BERT), LAN Cable Tester, and software tools like terminal emulators and GUI-based management interfaces.

Benefits

• Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis.
• Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent.
• Basic Life Insurance - Company provided benefit for all full-time employees.
• Supplemental Life Insurance - Optional life insurance coverage to employees at group rates.
• Dependant Life Insurance - Optional coverage for dependents at a group rate.
• Long Term Disability Insurance - Optional coverage available to employees at group rates.
• Vacation and Sick Leave - Leave accrual is determined by length of service.
• Holidays - The company observes ten paid holidays each year.
• Retirement 401(k) Plan - Centurum’s corporate benefits package includes 401K with a company bi-weekly match and a year-end profit sharing company match for all eligible employees. Investments can be made into selected funds under this plan.

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level
• Education Level: High school or GED