Electrical Hardware Design Engineer

Ralliant•Spartanburg, SC

About The Position

Anderson-Negele is seeking a hands-on Electrical Hardware Design Engineer in Spartanburg, South Carolina, to own electronics for new hygienic sensors and measurement systems from concept through production. The role covers requirements and architecture, component selection, schematic design, personally completing PCB layout and routing, prototypes, board bring-up, validation, production release, and product certification. Products are used continuously in food, beverage, and pharmaceutical plants, so the engineer must design for compliance from the outset. The engineer designs analog, mixed-signal, power, and microcontroller circuits for industrial sensing and personally owns PCB placement, stack-up, multilayer routing, libraries, design rules, and fabrication and assembly outputs. The role also involves working with fabricators and contract manufacturers on design-for-manufacturing and test, prototype builds, and production ramp-up. The position is responsible for designing to applicable safety, EMC, and environmental requirements; conducting pre-compliance testing; and working with third-party laboratories through certification. It includes board validation and environmental testing, production-floor support, troubleshooting and root-cause analysis, sustaining and redesign work, and collaboration with mechanical, firmware, manufacturing, quality, and product management teams.

Requirements

  • Bachelor of Science in Electrical Engineering; a master's degree is preferred.
  • At least 5 years of hands-on hardware design experience on industrial or similarly regulated products.
  • Ownership of at least two electronic products from concept through production, designed from scratch rather than modified.
  • Hands-on PCB layout and routing experience, including personally routing multilayer boards that entered production; Altium, KiCad, or similar tools.
  • Direct experience taking a product through UL, CSA, and/or CE certification, including resolving safety and EMC findings with test laboratories.
  • Working knowledge of safety standards including UL/IEC 61010-1, UL 508, and IEC 62368-1, and EMC standards including IEC 61326-1, IEC 61000-4-x, and CISPR 11.
  • Strong understanding of analog and mixed-signal design, microcontroller systems, power supplies and isolation, signal conditioning, and circuit protection such as ESD, surge, and transients.
  • Experience with board bring-up, debugging, laboratory instrumentation, and PCB or contract manufacturers.
  • Ability to walk through a product personally designed, layouts personally routed, and certifications earned.

Nice To Haves

  • Industrial instrumentation or sensor experience, such as temperature, pressure, level, flow, or weighing.
  • Experience with industrial protocols such as 4–20 mA/HART, IO-Link, Modbus, PROFINET, or EtherNet/IP.
  • Experience with hygienic processing environments, including food, beverage, or pharmaceutical applications and 3-A or EHEDG, and harsh-environment design such as washdown or IP67/IP69K.
  • Experience with hazardous locations (ATEX/IECEx, Class I Div 2), functional safety (IEC 61508), or MID/NTEP.
  • RF, wireless, or IoT connectivity experience with FCC/RED compliance.
  • Experience leading design reviews or mentoring engineers.

Responsibilities

  • Own new-product electronics from requirements and architecture through component selection, schematics, prototypes, and production release.
  • Design analog, mixed-signal, power, and microcontroller circuits for industrial sensing, including RTD/NTC, 4–20 mA, HART, and industrial I/O; perform simulation, worst-case analysis, and derating.
  • Lead and participate in schematic and PCB design reviews.
  • Personally lay out and route PCBs, including placement, stack-up, multilayer routing, libraries, design rules, and fabrication and assembly outputs.
  • Work with fabricators and contract manufacturers on DFM, DFT, Gerber/BOM reviews, prototype builds, and production ramp-up.
  • Design for UL, CSA, and CE requirements, including relevant safety and EMC standards, from the first schematic.
  • Run pre-compliance testing, work with third-party laboratories through certification, and maintain technical files and critical component lists.
  • Bring up and validate boards using laboratory instruments and write and execute DVT plans, including environmental testing.
  • Support the manufacturing production floor by resolving build and test issues, troubleshooting, and leading root-cause analysis of hardware, manufacturing, and field failures.
  • Drive reliability, cost, and obsolescence redesigns while protecting existing UL/CSA/CE listings.
  • Collaborate with mechanical, firmware, manufacturing, quality, and product management teams, and communicate design intent to vendors and certification bodies.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service