Electrical Hardware Design Engineer

Ralliant•Spartanburg, SC
•$83,400 - $155,000•Onsite

About The Position

Anderson-Negele is seeking a hands-on Electrical Hardware Design Engineer in Spartanburg, South Carolina, to own electronics for new hygienic sensors and measurement systems from architecture through production. The role covers requirements, component selection, circuit design, schematic capture, personally performing PCB layout and routing, prototypes, board bring-up, validation, production release, and product certification. Products are used in continuous-operation food, beverage, and pharmaceutical plants, so the engineer is expected to account for compliance from the beginning of the design process. The engineer designs analog, mixed-signal, power, and microcontroller circuits for industrial sensing, including RTD/NTC, 4–20 mA, HART, and industrial I/O. The position includes simulation, worst-case analysis, derating, and hands-on ownership of multilayer PCB placement, stack-up, routing, libraries, design rules, and fabrication and assembly outputs. The engineer also works with fabricators and contract manufacturers on DFM, DFT, prototype builds, and production ramp-up. The role involves designing to UL, CSA, and CE requirements; conducting pre-compliance testing; coordinating with certification laboratories; and maintaining technical files and critical component lists. It also includes board validation and environmental testing, production-floor support, troubleshooting and root cause analysis, and reliability, cost, and obsolescence redesigns while protecting existing certifications. The engineer collaborates with mechanical, firmware, manufacturing, quality, and product management teams, as well as vendors and certification bodies.

Requirements

  • Bachelor of Science in Electrical Engineering; a master's degree is preferred.
  • At least 5 years of hands-on hardware design experience on industrial or similarly regulated products.
  • Ownership of at least two electronic products designed from scratch, from concept through production.
  • Hands-on PCB layout and routing experience, including personally routing multilayer boards that entered production; experience with Altium, KiCad, or similar tools.
  • Direct experience taking a product through UL, CSA, and/or CE certification, including resolving safety and EMC findings with test laboratories.
  • Working knowledge of safety standards including UL/IEC 61010-1, UL 508, and IEC 62368-1, and EMC standards including IEC 61326-1, IEC 61000-4-x, and CISPR 11.
  • Strong knowledge of analog and mixed-signal design, microcontroller systems, power supplies and isolation, signal conditioning, and circuit protection such as ESD, surge, and transient protection.
  • Experience with board bring-up, debugging, laboratory instrumentation, and PCB or contract manufacturers.
  • Ability to discuss a product personally designed, layouts personally routed, and certifications earned.

Nice To Haves

  • Industrial instrumentation or sensor experience in areas such as temperature, pressure, level, flow, or weighing.
  • Experience with industrial protocols such as 4–20 mA/HART, IO-Link, Modbus, PROFINET, or EtherNet/IP.
  • Experience in hygienic processing environments, including food, beverage, or pharmaceutical applications; 3-A or EHEDG; or harsh-environment design such as washdown and IP67/IP69K.
  • Hazardous-location experience, such as ATEX/IECEx or Class I Division 2, or experience with functional safety (IEC 61508) or MID/NTEP.
  • RF, wireless, or IoT connectivity experience with FCC/RED compliance.
  • Experience leading design reviews or mentoring engineers.

Responsibilities

  • Own new-product electronics from requirements and architecture through component selection, schematics, prototypes, and production release.
  • Design analog, mixed-signal, power, and microcontroller circuits for industrial sensing, using simulation, worst-case analysis, and derating.
  • Lead and participate in schematic and PCB design reviews.
  • Personally perform PCB placement, stack-up design, and multilayer routing, and own libraries, design rules, and fabrication and assembly outputs.
  • Work with fabricators and contract manufacturers on DFM, DFT, Gerber and BOM reviews, prototype builds, and production ramp-up.
  • Design products to UL, CSA, and CE requirements, applying relevant safety and EMC standards from the initial schematic onward.
  • Run pre-compliance tests and work with third-party laboratories through certification; maintain technical files and critical component lists.
  • Bring up and validate new boards using laboratory instruments, and write and execute DVT plans that include environmental testing.
  • Support manufacturing production by resolving build and test issues, troubleshooting, and leading root cause analysis of hardware, manufacturing, and field failures.
  • Drive reliability, cost, and obsolescence redesigns while protecting existing UL, CSA, and CE listings.
  • Collaborate with mechanical, firmware, manufacturing, quality, and product management teams, and communicate design intent to vendors and certification bodies.

Benefits

  • Bonus or equity eligibility as part of the total compensation package.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service