EHS Field Manager - North Division

Kelso Industries•Dickinson, ND

About The Position

The EHS Field Manager provides Environmental, Health, and Safety leadership and field support for electrical construction, oil and gas, energy, industrial, and related field operations. The position partners with project leadership, supervisors, employees, subcontractors, and clients to identify and control high-risk exposures, support regulatory and client compliance, prevent incidents, and improve field safety performance. This is a field-focused leadership position requiring regular presence at active worksites and operational locations. Supported work may involve electrical systems and energized or de-energized equipment; hazardous classified locations; oil and gas facilities; hazardous-energy isolation; excavation; lifting and rigging; mobile equipment; confined spaces; pressure systems; hot work; flammable materials; atmospheric hazards; and other high-hazard activities. The role provides practical safety guidance while supporting operational leadership and field employees. It includes field inspections and audits, risk assessment and pre-task planning, incident investigation and corrective-action follow-up, training and competency support, environmental and EHS documentation, and coordination with clients and contractors. The manager must determine which OSHA framework and other requirements apply to the specific work and environment, rather than assuming one standard governs all oil and gas work.

Requirements

  • At least 5 years of progressive EHS experience supporting electrical construction, oil and gas, energy, industrial, or other high-hazard field operations.
  • Strong working knowledge of applicable OSHA 29 CFR 1910 and 1926 requirements and ability to determine which framework applies to the work being performed.
  • Working knowledge of electrical hazard recognition, electrical safety-related work practices, lockout/tagout, electrical PPE, and hazardous classified locations.
  • Demonstrated experience with high-hazard activities, including electrical work, excavation, lifting and rigging, confined spaces, hot work, mobile equipment, and energy isolation.
  • Experience conducting field inspections, audits, risk assessments, incident investigations, and corrective-action follow-up.
  • Experience reviewing JHAs/JTAs, pre-task plans, energy-control plans, permits, lift plans, and other high-risk work documentation.
  • Knowledge of DOT/FMCSA requirements where commercial motor vehicle or regulated transportation activities fall within the assigned scope.
  • OSHA 30-Hour Construction certification.
  • First Aid/CPR/AED certification, or ability to obtain it upon hire.
  • Strong written and verbal communication skills and ability to work effectively with craft employees, supervisors, project leadership, clients, and subcontractors.
  • Valid driver’s license and ability to travel regularly to jobsites and operational locations.
  • Ability to perform fieldwork, including walking uneven terrain, climbing, and navigating active construction, oil and gas, and industrial environments.
  • Ability to identify which OSHA standards and other requirements apply to the specific activity and work environment.

Nice To Haves

  • Bachelor’s degree in Occupational Safety, Environmental Science, Construction Management, Engineering, or a related field; equivalent relevant experience may be considered.
  • CSP, ASP, CHST, OHST, STS/STS-C, CSHO, or comparable recognized safety credential.
  • NFPA 70E training appropriate to assigned responsibilities.
  • Oil and gas safety orientation, H2S awareness, confined-space, excavation, rigging, or emergency-response training appropriate to the operations supported.

Responsibilities

  • Provide visible EHS leadership and regular field presence across assigned projects and operational locations.
  • Partner with project managers, supervisors, and foremen to identify hazards and establish controls before work begins.
  • Support implementation of company EHS programs, client requirements, and site-specific rules.
  • Coach field leadership and employees on hazard recognition, pre-task planning, and safe work practices.
  • Support safety meetings, stand-downs, lessons learned, and targeted improvement initiatives.
  • Exercise stop-work authority when an imminent or uncontrolled serious hazard is identified, consistent with company and project requirements.
  • Provide field oversight for installation, maintenance, testing, troubleshooting, commissioning, energization, and de-energization of electrical systems associated with oil and gas facilities and related infrastructure.
  • Verify electrical work is planned and controlled using applicable OSHA electrical requirements, company procedures, client requirements, and NFPA 70E practices where applicable.
  • Support establishment of electrically safe work conditions and verification of hazardous-energy isolation before work begins.
  • Review electrical work planning for shock and arc-flash exposure, approach boundaries, barricades, restricted access, job briefings, test instruments, insulated tools, and task-appropriate electrical PPE.
  • Verify electrical equipment, wiring methods, fittings, enclosures, seals, and utilization equipment are suitable for hazardous classified locations and conditions of use.
  • Support verification that hazardous-area classifications are available and understood before electrical installation, maintenance, or modification where ignitable atmospheres may be present.
  • Coordinate electrical work controls with gas testing, hot-work restrictions, process isolation, simultaneous operations, and client/operator permit-to-work systems where applicable.
  • Support electrical LOTO and circuit lockout/tagging practices, including coordination of electrical and non-electrical hazardous-energy sources.
  • Verify qualified-person and task-specific electrical training requirements are addressed for employees exposed to electrical hazards.
  • Support controls for temporary power, grounding and bonding, GFCI requirements, extension cords, portable equipment, generators, and electrical installations used in field construction.
  • Identify electric power generation, transmission, or distribution work and escalate for specialized requirements, including 29 CFR 1910.269 where within scope.
  • Support EHS controls for drilling and servicing interfaces, production and processing facilities, electrical and instrumentation work, hot work, confined spaces, excavation, pressure and stored energy, lifting and rigging, mobile equipment, flammable materials, atmospheric hazards, and H2S exposure where applicable.
  • Coordinate with operations and client representatives on permit-to-work requirements, simultaneous operations, isolation boundaries, and emergency arrangements.
  • Support atmospheric testing requirements for work with potential exposure to oxygen deficiency or enrichment, flammable atmospheres, or toxic contaminants.
  • Support PPE and flame-resistant clothing requirements based on hazard assessment, applicable regulations, and client/site requirements.
  • Conduct routine and targeted EHS inspections and audits; identify uncontrolled exposures and partner with operational leadership on corrective actions.
  • Track corrective actions through completion and review high-risk activities before work begins, including participation in job hazard analysis and pre-task planning.
  • Monitor subcontractor compliance with applicable company, project, client, and regulatory requirements; support client, third-party, and regulatory inspections or audits.
  • Support prompt reporting of injuries, illnesses, near misses, environmental events, property damage, vehicle incidents, and other EHS events.
  • Participate in or lead investigations as appropriate; gather and preserve relevant facts and documentation; support root-cause and contributing-factor analysis.
  • Work with operational leadership to develop practical corrective and preventive actions, track them to closure, and communicate lessons learned and recurring trends.
  • Support and, when qualified, deliver training in electrical safety/NFPA 70E, hazardous-energy control, hazardous classified locations awareness, H2S awareness, confined spaces, excavation, fall protection, rigging, hot work, hazard communication, PPE, emergency response, and job hazard analysis.
  • Monitor applicable employee qualifications and training requirements in coordination with operations and company training processes.
  • Participate in mobilization, preconstruction, constructability, shutdown, energization, commissioning, startup, and other high-risk activity reviews.
  • Support development and review of JHAs/JTAs, pre-task plans, switching and energy-isolation plans, lift plans, permits, and other risk-control documentation.
  • Identify changing conditions and emerging hazards and assist leadership in selecting practical engineering, administrative, and PPE controls.
  • Support proper handling, storage, and disposal of hazardous materials and wastes; spill prevention and response; stormwater; and chemical-management requirements as applicable.
  • Maintain accurate EHS inspection, training, incident, and corrective-action records; support OSHA recordkeeping and claims documentation with corporate EHS, HR, Risk Management, and other responsible functions.
  • Confirm the applicable OSHA framework during planning and document task-specific requirements, including review of applicable state-plan, client/operator, and site-specific requirements before mobilization.
  • Screen whether 29 CFR 1910.119 applies to covered processes involving highly hazardous chemicals and follow site/operator requirements where applicable.
  • Serve as a field EHS resource to project and operational leadership; communicate significant hazards, incidents, trends, and corrective actions to appropriate leadership.
  • Coordinate with client/operator and contractor EHS representatives regarding site-specific requirements and shared exposures.
  • Build relationships with field employees and supervisors that encourage early identification and reporting of hazards.
  • Provide practical recommendations that support employee protection and safe field execution without transferring operational ownership from field leadership to EHS.

Benefits

  • Growth opportunities and career development.
  • Company culture that supports employee growth and values contributions.
  • Work with meaningful impact across industrial, commercial, and institutional sectors.
  • Competitive compensation and benefits intended to support financial security, health, and overall well-being.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service