EHS Field Manager - North Division

Kelso Industries•Dickinson, ND

About The Position

The EHS Field Manager provides Environmental, Health, and Safety leadership and field support for electrical construction, oil and gas, energy, industrial, and related field operations. The role partners with project leadership, supervisors, employees, subcontractors, and clients to identify and control high-risk exposures, support regulatory and client compliance, prevent incidents, and improve field safety performance. It is a field-focused leadership position requiring regular presence at active worksites and operational locations. The position supports work involving electrical systems and energized or de-energized equipment; hazardous classified locations; oil and gas facilities; hazardous energy isolation; excavation; lifting and rigging; mobile equipment; confined spaces; pressure systems; hot work; flammable materials; atmospheric hazards; and other high-hazard activities. The role requires assessing which OSHA framework applies to the activity and considering applicable state-plan, client, operator, and site requirements. NFPA 70E is treated as a consensus standard and company or client practice where adopted or required, not as a stand-alone OSHA regulation. The EHS Field Manager provides visible field leadership, reviews work planning and risk controls, conducts audits and inspections, supports incident investigations and corrective actions, contributes to training and competency development, and maintains EHS documentation. The position works with operational leadership and client or contractor EHS representatives, offering practical safety recommendations while leaving operational ownership with field leadership.

Requirements

  • Bachelor’s degree in Occupational Safety, Environmental Science, Construction Management, Engineering, or a related field preferred; equivalent relevant experience may be considered.
  • At least 5 years of progressive EHS experience supporting electrical construction, oil and gas, energy, industrial, or other high-hazard field operations.
  • Strong working knowledge of applicable OSHA 29 CFR 1910 and 1926 requirements and ability to determine which framework applies to the work being performed.
  • Working knowledge of electrical hazard recognition, electrical safety-related work practices, lockout/tagout, electrical PPE, and hazardous classified locations.
  • Demonstrated experience with high-hazard activities including electrical work, excavation, lifting and rigging, confined spaces, hot work, mobile equipment, and energy isolation.
  • Experience conducting field inspections, audits, risk assessments, incident investigations, and corrective-action follow-up.
  • Experience reviewing JHAs/JTAs, pre-task plans, energy-control plans, permits, lift plans, and other high-risk work documentation.
  • Knowledge of DOT/FMCSA requirements where commercial motor vehicle or regulated transportation activities fall within the assigned scope.
  • OSHA 30-Hour Construction certification required.
  • First Aid/CPR/AED certification required or ability to obtain it upon hire.
  • Strong written and verbal communication skills and ability to work effectively with craft employees, supervisors, project leadership, clients, and subcontractors.
  • Valid driver’s license and ability to travel regularly to jobsites and operational locations.
  • Ability to perform fieldwork, including walking uneven terrain, climbing, and navigating active construction, oil and gas, and industrial environments.

Nice To Haves

  • CSP, ASP, CHST, OHST, STS/STS-C, CSHO, or comparable recognized safety credential.
  • NFPA 70E training appropriate to assigned responsibilities.
  • Oil and gas safety orientation, H2S awareness, confined-space, excavation, rigging, or emergency-response training appropriate to the operations supported.

Responsibilities

  • Provide visible EHS leadership and regular field presence across assigned projects and operational locations.
  • Partner with project managers, supervisors, and foremen to identify hazards and establish controls before work begins.
  • Support implementation of company EHS programs, client requirements, and site-specific rules; coach employees and field leadership on hazard recognition, pre-task planning, and safe work practices.
  • Support safety meetings, stand-downs, lessons learned, and targeted improvement initiatives; exercise stop-work authority when an imminent or uncontrolled serious hazard is identified.
  • Provide field oversight for electrical installation, maintenance, testing, troubleshooting, commissioning, energization, and de-energization associated with oil and gas facilities and related infrastructure.
  • Verify electrical work planning and controls address applicable OSHA requirements, company and client procedures, hazardous-energy isolation, shock and arc-flash exposure, boundaries, barricades, access, briefings, test instruments, insulated tools, and task-appropriate PPE.
  • Verify electrical equipment and wiring used in hazardous classified locations are suitable, and support review and communication of area classifications before electrical work.
  • Coordinate electrical work controls with gas testing, hot-work restrictions, process isolation, simultaneous operations, and client/operator permit-to-work systems where applicable.
  • Support electrical and other hazardous-energy isolation practices, qualified-person and task-specific training requirements, and controls for temporary power, grounding and bonding, GFCI, cords, portable equipment, generators, and field electrical installations.
  • Screen for electric power generation, transmission, or distribution work and escalate for specialized requirements, including 29 CFR 1910.269 when within scope.
  • Support EHS controls for oil and gas and energy operations, including drilling and servicing interfaces, production and processing facilities, instrumentation work, confined spaces, excavation, pressure and stored energy, lifting and rigging, mobile equipment, flammable materials, atmospheric hazards, and H2S exposure where applicable.
  • Coordinate permit-to-work requirements, simultaneous operations, isolation boundaries, emergency arrangements, atmospheric testing, and hazard-based PPE and flame-resistant clothing requirements with operations and client representatives.
  • Conduct routine and targeted EHS inspections and audits, identify uncontrolled exposures, establish corrective actions with operational leadership, and track actions through completion.
  • Review high-risk activities before work begins, participate in job hazard analysis and pre-task planning, monitor subcontractor compliance, and support client, third-party, or regulatory inspections and audits.
  • Support prompt reporting of injuries, illnesses, near misses, environmental events, property damage, vehicle incidents, and other EHS events; participate in or lead investigations as appropriate.
  • Gather and preserve relevant incident facts and documentation, support root-cause and contributing-factor analysis, develop corrective and preventive actions with operational leadership, track them to closure, and communicate lessons learned and trends.
  • Support and, when qualified, deliver training in applicable areas such as electrical safety, NFPA 70E, hazardous energy control, hazardous classified locations, H2S, confined spaces, excavation, fall protection, rigging, hot work, hazard communication, PPE, emergency response, and job hazard analysis.
  • Monitor applicable employee qualifications and training requirements with operations and company training processes.
  • Participate in mobilization, preconstruction, constructability, shutdown, energization, commissioning, startup, and other high-risk activity reviews.
  • Support development and review of JHAs/JTAs, pre-task plans, switching and energy-isolation plans, lift plans, permits, and other risk-control documentation; identify changing conditions and emerging hazards and help select practical controls.
  • Support proper handling, storage, and disposal of hazardous materials and wastes, spill prevention and response, stormwater, and chemical-management requirements as applicable.
  • Maintain accurate EHS inspection, training, incident, and corrective-action records; support OSHA recordkeeping and claims documentation with corporate EHS, HR, Risk Management, and other responsible functions.
  • Confirm applicable OSHA frameworks and task-specific requirements during planning, including whether work falls under general-industry or construction standards, and review applicable state-plan, client/operator, and site-specific requirements.
  • Communicate significant hazards, incidents, trends, and corrective actions to appropriate leadership; coordinate with client/operator and contractor EHS representatives and build relationships that encourage early hazard identification and reporting.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service