Pod 753 - Disassembly

Jasper Holdings Inc.•Jasper, IN

12h•$20•Onsite

About The Position

This position involves a variety of tasks, including the operation of basic hand tools and the detailed cleaning of parts using solvents, brushes, and scrapers. The associate will verify the tag of the Bill of Materials (BOM) matches the unit provided. The disassembly process begins by removing external components such as bolts and seals. Following this, the oil pan is removed to expose the internal parts. Subsequently, components like the valve body, pump(s), wiring harness, and clutch packs are removed. The final steps involve cleaning parts with solvent, placing them in baskets, and sending them through a washer.

Requirements

Ability to lift, bend, push, pull, and move materials up to 50lbs.
Ability to stand or walk for an entire shift (approximately 8-10 hours).
Ability to use handheld tools such as Impacts, Pneumatic Drills, and Hammers.
Must be able to stand continuously.
Must be able to occasionally walk.
Must never sit.
Must be able to occasionally stoop (forward leaning).
Must be able to occasionally reach/work overhead.

Responsibilities

Verify the tag of the BOM matches the unit (core) provided.
Remove bolts, seals, and other external components from the unit.
Remove the oil pan to access internal parts.
Remove internal components such as the valve body, pump(s), wiring harness, and clutch packs.
Clean parts using solvent.
Place cleaned parts in baskets.
Send parts through a washer.