Crash Attenuator Operator (Equipment Operator II) - Golden (4 positions)

State of Colorado•Denver, CO

10d•Onsite

About The Position

These positions are within the Division of Maintenance and Operations and Traffic Operations Branch of the Colorado Department of Transportation (CDOT). The Traffic Operations Services Branch exists to improve the safety and efficiency of Colorado’s transportation system through institutionalized and forward leaning real-time operational excellence. This is accomplished through two primary program areas, the Operation Centers program and the Incident Response program. The Operation Centers program is focused on providing credible, real-time information to the department, first responders, and public. The Incident Response program is focused on providing expert traffic incident management, reducing roadway impacts, and protecting the lives of motorists and responders through coordinated and efficient incident response. The Crash Attenuator Operator positions are to ensure safe travel for the traveling public by operating equipment and providing traffic control when CDOT responds to highway incidents. All duties are performed with safety as the primary goal and to provide essential or emergency services that ensure the health, safety, and welfare of the traveling public on state highways. These positions provide exceptional internal and external customer service, continually learns and develops job knowledge to keep up with changes in procedures, technology, and priorities. The Crash Attenuator Operator positions must maintain operational readiness for snow events and other emergencies and may be placed on call.

Requirements

At least two (2) years of experience with vehicle operation to include one or more of the following in: Traffic Control, Incident Management, Transportation, Transportation Management, Emergency Management, Management, Safety Management or other work related to the major duties of this position.
Must pass a pre-employment screening which may include social security number trace, criminal records check, public court records check, educational records, and driving records checks
Must complete IS 100, IS 200 and IS 700 training within 3 months of employment
Must complete and obtain the Traffic Control Technican certification within 3 months of employment

Nice To Haves

Demonstrated success with the duties as listed in the Description of the Job section
Years of State service experience related to the duties of this position
Highest work/personal ethics and integrity
Experience with Traffic Control or Incidents
Depth and Breadth of experience with heavy equipment operation
Depth and Breadth of experience operating equipment such as truck mounted crash attenuators or Truck Mounted VMS boards
Effective interpersonal and relationship building skills
Effective oral communication and customer service skills
Strong attention to detail and accuracy
Mechanical ability
Flexibility in adapting to changing circumstances
Strong commitment to safety
Strong positive and can-do attitude
Self-starter and motivated to accomplish assigned tasks
Strong attention to technical detail and accuracy
Ability to quickly learn with minimal direction
Ability to work effectively in both independent and team situations
Strong analytical, reasoning, troubleshooting, and problem solving skills
Familiarity with SAP and the knowledge and know how to use computers and the ability to एकमे

Responsibilities

Perform skilled physical work using appropriate tools and materials to achieve Division of Maintenance Operations (DMO) objectives, to ensure the safety of the traveling public, and to remove debris and obstruction as quickly as possible
Set up traffic control zones on the interstate and/or ramps by correctly deploying crash attenuator, traffic cones, and other items to close any necessary lanes
Move vehicle from the road by pushing it to the side, directing the motorist to move it, or keeping it safe for a tow truck
Clear crash scenes by removing debris, placing absorbent on the road for oil/gas leaks, and evaluating guardrail and other infrastructure for damage/ safety
Provide fuel, change tires, and give jumps to stalled vehicles
Pick up and deliver materials from the storeroom
Ensure tools are in safe operating condition. Perform and assist in maintaining and repairing tools
Maintain knowledge and skill in operating hand tools, including learning new pieces/types of tools and related technology
Obtain, maintain, and use certifications for, Traffic Incident Management (TIMS), traffic control technician and flagger
Perform physical labor such as bending, reaching, carrying, pounding, lifting, pulling, shoveling, raking, throwing, twisting, walking, stretching to achieve maintenance objectives
Safely and proficiently drive, operate, and maintain equipment such as truck mounted crash attenuators, and Truck Mounted VMS boards
Ensure equipment is in safe operating condition. Complete pre- and post-trip inspections, via paper and electronically
Perform and assist in basic equipment maintenance and repair
Learn to operate and maneuver new pieces/types of equipment and related technology systems
Maneuver equipment safely in and out of hard to access locations and areas that have buildings, guard rail, slopes, trees, or hidden hazards
Operate technology systems in the equipment to help with operational decision-making, inspections, and maintenance. (example systems include Truck and Equipment Controller Systems, electronic fleet management systems, Automatic Vehicle Location (AVL) System, etc
Develop proficiency in operations in three key areas: equipment maintenance (pre/post trips, operators manual, proper servicing and cleaning), safety and environmental awareness (safe operations, situational awareness, environmental impact awareness, and equipment specific operating hazards), and effective operations (accomplishing specific tasks under field conditions)
Utilize laptop, radio, and a tablet based data collection system can be notified of incident locations, communicate with local responders and dispatch, and locate available resources
Update data collection system with data on each incident, such as what occurred on scene, what supplies were used, time spent en route and on scene, which agencies responded, information on the vehicles involved, VMS used, and cones used/hit. The data collection system maintains the data on all incidents
Notify the maintenance section if any guardrail or other structures are damaged and need repair
Assess emergency situations to determine appropriate action to take. Ensure supervisor is notified
Ensure interactions with internal and external customers are professional. Communicate effectively and professionally. Exhibit acceptance of diversity in providing effective customer service to diverse groups of internal and external customers
Provide assistance to the public during emergency situations. Take appropriate action to keep self and the public safe
Provide information, education, and guidance to supervisor, team members, dispatch, local responders, DMO, the public and Communications Office as needed
Take appropriate action when a complaint is received; ensure the supervisor is notified
Develop and maintain effective working relationships with other resources within CDOT, such as maintenance, equipment shop
Develop and maintain effective working relationships with external entities, such as law enforcement, fire, municipalities, counties, and other state agencies
Other duties as assigned