Crane Operator 1

M.C. Dean, Inc•Caroline County , MD

1d•Onsite

About The Position

The Crane Operator 1 operates assigned fixed-cab telescopic cranes on routine lifts under direct supervision and documented employer evaluation. The role completes basic inspections, assists with setup, applies provided load-chart information, follows the designated signal person, and performs smooth basic operating functions within assigned limits. Work outside the approved setup, load information, or operating conditions is stopped and referred to a qualified operator or supervisor.

Requirements

Minimum of high school diploma or GED with 2 years of experience, or combination of equivalent experience and training.
Current CCO Telescopic Boom Crane - Fixed Cab (TSS) certification.
Documented employer operator evaluation for the assigned crane type, size, configuration, and work.
CDL Class A and medical card when assigned carrier or transport duties.
State, local, project, or customer crane qualification when required.
Ability to work outdoors, enter and exit equipment safely, and maintain attention during lifting operations.
The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis.
Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials.
Proper lifting techniques and safety protocols must be followed to ensure personal and team safety.
Relocates a 12 foot stepladder without assistance.
Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
May use a standard ladder without exceeding the weight limit while carrying tools.
Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
Apply general rules to specific problems to produce answers that make sense.
Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
See details at close range (within a few feet of the observer).
Listen to and understand information and ideas presented through spoken words and sentences.

Responsibilities

Review the assigned load, pick and set points, route, signal method, basic crane configuration, operating limits, and stop conditions with the lead or operator trainer.
Complete assigned pre-use walk-around and cab checks; report leaks, damage, failed functions, warning lights, unusual sounds, or missing documents before operation.
Assist with crane positioning, mats, cribbing, outrigger deployment, leveling, accessories, and work-area controls exactly as directed.
Locate the correct load chart and confirm basic inputs such as load weight, radius, boom length, outrigger position, hook block, attachments, and rigging deductions with a qualified operator.
Maintain swing-radius, fall-zone, power-line, traffic, and access controls and verify personnel are clear before moving the crane, boom, hook, or load.
Perform basic hoist, lower, boom, telescope, and swing functions smoothly under direct supervision; keep the load line vertical and avoid shock loading or side pulling.
Follow the designated qualified signal person, confirm the radio channel and stop signal, and stop immediately when signals are lost, conflicting, or unclear.
Perform routine test lifts under supervision and move loads slowly through the approved path while watching balance, rigging seating, brake response, and clearance.
Stop operation when an alarm activates, the load behaves unexpectedly, the crane response changes, or weather or site conditions no longer match the direction given.
Complete inspection, hour, fuel, and work records accurately; keep the cab, access points, windows, cameras, and controls clean and serviceable.
Support ground-crew setup, accessory handling, breakdown, fueling, lubrication, and housekeeping when authorized and not operating.