Assistant Meter & Relay Technician

PacifiCorp•Bend, OR
•Onsite

About The Position

PacifiCorp is hiring an Assistant Station Meter and Relay Technician for a hands-on, in-the-field training position similar to an apprenticeship. Assistants work with or under the direction of Journeyman Technicians while learning the Meter and Relay Trade. The training period is a minimum of two years, as defined by labor-management agreements, and consists of eight quarters of bookwork and hands-on tasks, with a test at the end of each quarter. A passing score is required to advance. Hands-on tasks take place during normal business hours; bookwork is completed outside work. Out-of-town travel is required for training classes and to work with technicians in other areas. Upon completing the training course, assistants advance to the Journeyman classification. The position is based in Bend, Oregon, and is 100% onsite. Training locations listed are Klamath Falls, Medford, Roseburg, and Yreka. Candidates must be willing and available to relocate to a training location and may need to relocate again after training, depending on whether they are assigned to a permanent position or must bid for an available position. Work may be performed alone or in crews, including crews with workers from other trades. Technicians may work under others' direction or direct others' work, depending on the assignment. Conditions may include adverse weather, extended hours during emergencies or to minimize customer impacts, confined spaces, elevated platforms, moving mechanical parts, dust, fumes, noise, water, and proximity to cables and conductors energized above 600 volts. Employees must be able to perform the essential functions of the position with or without accommodation.

Requirements

  • High school diploma, GED, or an equivalent combination of education and experience.
  • Successful completion of a required written examination covering AC and DC electrical theory, based on chapters 1–5, 7, and 12–14 of Schaum's Outlines of Basic Electricity, 2nd edition.
  • Valid driver's license with a good driving record and ability to acquire a Medical Examiner's Certificate.
  • Willingness and availability to relocate to a location where a training position is available and possibly relocate again after training.
  • Ability to understand and comply with company policies and procedures.
  • Ability to follow safety rules and use PPE appropriate for the work being performed.
  • Ability to communicate professionally and effectively, verbally and in writing.
  • Ability to lift and move objects exceeding 50 pounds.
  • Ability to work in the stated conditions, which may include adverse weather, long hours during emergencies, confined spaces, elevated platforms, and proximity to energized conductors above 600 volts.

Nice To Haves

  • Experience in electrical construction or maintenance in commercial or industrial settings.
  • Experience installing and troubleshooting motor controls and process instrumentation.
  • Working knowledge of AC and DC electrical theory.
  • Ability to troubleshoot, diagnose, and repair electrical installations safely and effectively.
  • Knowledge of and ability to safely use hand tools such as screwdrivers, pliers, wrenches, sockets, and tape measures.
  • Knowledge of and ability to safely use power tools such as drills, grinders, saws, heat guns, and soldering irons.
  • Knowledge of and ability to safely use electrical test equipment such as volt meters, amp meters, ohm meters, Meggers, and power quality analyzers.
  • Ability to read, understand, and use electrical schematics.
  • Ability to read and comprehend technical manuals.
  • Basic computer knowledge and ability to use programs such as Word, Excel, Outlook, and Internet Explorer.
  • PLC programming and troubleshooting experience.
  • State-issued Journeyman Electrician's license.
  • College or trade school degree or certificate in the electrical field with applicable hands-on experience.
  • Military experience in the electrical field with applicable hands-on experience.
  • Experience in the electrical utility industry or applicable high-voltage experience.
  • Department of Motor Vehicles CMV medical card.

Responsibilities

  • Install, commission, test, adjust, repair, and replace protection and control equipment in high-voltage generation plants and transmission and distribution substations.
  • Work with electro-mechanical, solid-state, and microprocessor protection relays; Watt and VAR meters; recording instruments such as Sequence of Event Recorders and Digital Fault Recorders; and controls for substation equipment including circuit breakers, motor-operated switches, transformers, load tap changers, voltage regulators, capacitor banks, and reactors.
  • Use computers to communicate with substation equipment and operate test gear.
  • Complete maintenance and commissioning forms accurately and submit them with all test records to the appropriate company departments.
  • Routinely operate substation equipment and perform substation switching and grounding as necessary.
  • Lift and move heavy objects exceeding 50 pounds.
  • Be responsible for assigned tools, computer, test equipment, and vehicles.
  • Complete the required quarterly training bookwork, hands-on tasks, and examinations; complete bookwork outside work hours.
  • Travel out of town to attend training classes and work with technicians from other areas.

Benefits

  • Medical insurance
  • Dental insurance
  • Vision insurance
  • 401(k) with matching contributions and a Roth and savings option
  • Life insurance
  • Voluntary benefits, including pet insurance
  • Tuition assistance
  • Mass transit pass for employees in the Portland and Salt Lake City offices
  • Paid time off
  • Paid short-term disability leave
  • Long-term disability insurance
  • Paid parental leave
  • Paid bereavement leave
  • Employee Assistance Program supporting mental and emotional wellbeing
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service