Assembly Finishing Operator | Monday- Thursday

Shaw•Dalton, GA

1d•Onsite

About The Position

This position is Monday - Thursday 2:45pm-12:45am. Position Objectives: Assemble sample boards, label Hard Surface samples and pack samples for shipping ensuring samples are free from defects. Position will require working at different stages of assembly according to production needs.

Requirements

Standing during entire shift.
Walking as needed to move material for rework or set-up in between orders.
Squatting as needed to move materials.
Lifting totes of swatches for set-up weighing an average 10 lbs.
Lifting up to 50 lbs. of Hard Surfaces boxes
Continual use of arms and hands lifting samples boards, placing swatches.
Pushing buggy or pallet jack.
Must be able to exert a maximum of 17 lbs. of downward force to push pallet jack handle down, and approximately 50 lbs. of pushing force when moving loaded buggies.
Must be able to work in a manufacturing environment.
Must have basic knowledge of computer operation.

Nice To Haves

Pulling and stocking mezz panels as necessary.
Running the edge staining machine.

Responsibilities

Set up totes in correct order checking with the go-by board to ensure order and colors are correct.
Place the swatches in position as the empty binder/board is conveyed through the work station.
Inspect work. Look for correct swatch alignment and color in board and check for excessive glue, under/oversized swatch cutting, obvious material defects, etc.
Inspect boards during processing and upon completion for defects.
Rework swatches/boards as needed.
Retrieve tops and topping supplies for sample boards as needed.
Adjust back glue head as needed.
Install tops using glue or posts as called for by work order.
Ensure materials are correct for order to be ran.
Set up glue heads and ensure glue is shooting on boards correctly.
Clean off lint and debris from the swatched binder/board using a vacuum.
Check gluepot and fill as needed.
Determine box size, package into box, secure with tape or strapping and stack onto pallet.
Stage work area with all required materials, ie. labels, swatches, work order, etc.
Inspect all labeling production and samples for quality defects.
Place the appropriate label on the back of the sample.
Place appropriate face sticker(s) on front of board if required.
Place appropriate product ID sticker on Mezz chips.
Fill glue reservoir tray on Gluefast machine with cold glue. Refill throughout day as necessary.
Inspect work, watching for obvious material defects to ensure that the finished sample will be of the highest quality.
Neatly restack all labeled work onto buggies or pallets.
Thoroughly clean Gluefast machine at end of shift.
Must use ink stamp to apply w/o number on all finished boards.
Put plastic handles on wood panels where oval shaped hole has been routed out.
Obtain boards that are to be packed from designated area.
Each buggy / pallet retrieved should be identified by a traveler and pulled up by promise date unless otherwise directed by lead or manager.
If there’s no buggy in staging area, consult Lead.
Verify that the traveler and label on board are same.
All boards, planks, etc. must have w/o number on it.
Make sure the amount of boards / panels match with the amount printed on the traveler.
Assemble all boards / panels for an order together.
Package as needed.
Attach shipping labels on the box(es).
Packer must always be aware of the condition of the boards and check for defects and incorrect labels.
Packer will printer and apply correct box stickers.
Packer is responsible to move full pallets to staging / pick up area beyond assembly tables.
Must meet production standards.
Key in production in computer throughout the day.
Set-up materials for subsequent jobs.
Rework samples or boards as needed.
Must adhere to the normal work schedule, i.e. starting and stopping times.
Attend job on a regular basis and comply with the Corporate Absenteeism and Tardiness Policy.
Must be flexible and work at different stages of assembly as requested by Supervisor or Lead.
Clean work area at end of shift and periodically during shift.
Any duties found necessary to aid in a safe and efficient operation.
Will be required to participate in stretching exercises as directed by the supervisor or lead.