Aircraft Mechanic I (General/Disassembly) - Night Shift

INNOVATIVE CONSULTING & MANAGEMENT • Elizabeth City, NC

1d • $44 • Onsite

About The Position

Innovative Consulting & Management Services (ICMS) is seeking an Aircraft Mechanic I for the U.S. Department of Homeland Security (DHS), U.S. Coast Guard (USCG) Aviation Logistics Center (ALC) for the Short-Range Recovery (SRR) Division. This role involves providing aircraft maintenance services, specifically focusing on the disassembly phase of Program Depot Maintenance (PDM) for the SRR MH-65 aircraft. PDM is a total overhaul of an airframe that occurs every four years, involving complete disassembly, cleaning, repair, repainting, and rebuilding of the aircraft. The mechanic will also perform other aircraft mechanical duties as needed throughout the ALC, including repairs and maintenance of various systems, flight line maintenance, and troubleshooting. The position requires adherence to work orders, technical guides, and safety practices, while maintaining a clean and safe work area. Responsibilities include handling hazardous materials and ensuring timely completion of repairs with minimal rework.

Requirements

• Minimum of two (2) years of aircraft related mechanical experience or an Airframe and Power Plant (A&P) certificate.
• Ability to demonstrate work methods and techniques.
• Extensive knowledge of a wide variety of parts, components, and complex assemblies associated with aircraft systems.
• Ability to rig, function test, or troubleshoot systems; determine when they are operating properly or whether portions of the system must be repaired or replaced; and the type and extent of adjustment and alignment needed.
• Knowledge of the make-up, operation, installation, and adjustment of a variety of major interrelated and/or integrated aircraft systems, subsystems, and assemblies such as fuel and hydraulic systems, flight control systems, instrumentation systems, engine(s), landing gear assemblies, airframe, and control surfaces.
• Skill in the use of standard and specialized tools and the equipment of the trade including fixtures, templates, scales, test stands and external power sources.
• Skill in reading and understanding data and settings from cockpit instruments and gauges.
• Knowledge of activity supply procedures to be able to initiate requisitions for needed parts and supplies and has a thorough knowledge of the publication order system to obtain the most up-to-date technical manuals and to propose changes to publications when they find a discrepancy.
• Ability to read, understand and apply trade or administrative guides such as technical manuals, technical orders, blueprints, sketches, and other related documents.
• Ability to reach, bend, walk, pull, sit, stand, crouch, stoop, kneel and stretch for prolonged periods of time.
• Frequently lift parts and equipment that weigh up to 20 pounds.
• Occasionally, may lift and carry items that weigh up to 50 pounds with mechanical lifting devices or assistance from other workers, if required.
• May be required to work in cramped, awkward and strained positions or required to climb ladders, work platforms, scaffolding and aircraft structures.
• Capability to work in regulated areas with toxic materials present including hexavalent chromium and cadmium. This will include use of Personal Protective Equipment (PPE) such as protective clothing, etc.
• Knowledge, skill and ability to follow appropriate safety procedures common to the trade.
• Knowledge of specific hazardous materials and hazardous wastes procedures is necessary, including the proper fitting and usage of protective gear and completion of related training.
• Skilled in the use of standard and specialized tools and the equipment of the trade including fixtures, templates, scales, test stands and external power sources.
• Technical capability/experience with aircraft, airframes, components, and substructures. Should include maintenance of primary, secondary, and tertiary structures.
• Technical capability to assist in PDM of USCG aviation assets.
• Ability to conduct research using USCG data systems such as TMAPS, or similar type systems.
• High school diploma or equivalent (unless higher education is required for a particular job category).
• Ability to read, write, speak, and understand English fluently.
• Shall be citizens of the U.S.
• Possess computer skills to include basic knowledge sufficient to complete internet searches and prepare/edit documents utilizing word processing or spreadsheet applications.
• Shall be capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time.
• Shall be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures.
• Shall be capable of carrying items up to 40 pounds and on heavier items shall seek assistance of other workers or weightlifting devices.
• Shall be capable of using cumbersome Personal Protective Equipment (PPE) for Hazardous Material (HAZMAT) operations.

Nice To Haves

• Familiarity with OEM’s manuals or similar manuals with the ability to research maintenance history, procedures and component limitations is desired.
• Technical capability to deal with aircraft upgrades and aging aircraft sustainment issues. Experience with new component integration and developing repair or replacement strategies for airframes, components, and/or substructures.

Responsibilities

• Conducting the Disassembly Phase of the PDM process, including complete disassembly of the aircraft and preparation for blast within six (6) workdays of receipt of the aircraft.
• Routing of required parts throughout the Disassembly Phase, completed no later than nine (9) workdays of receipt of aircraft.
• Performing other aircraft mechanical duties for the SRR Product Line and/or throughout Aviation Logistics Center (ALC) when Disassembly Phase is completed and prior to receipt of another aircraft.
• Repairing and maintaining various mechanical, fuel, and hydraulic systems.
• Performing flight line maintenance of assigned and transient operational aircraft, including functional testing, troubleshooting, and repairing all airframe mechanical systems, or post assembly checkout, adjustment, and repair of overhauled and modified aircraft to prepare for and correct deficiencies found on functional flights.
• Following work orders as assigned.
• Checking a variety of complex technical guides to ensure they include up-to-date changes.
• Reporting errors and poorly presented or confusing information to the COR.
• Demonstrating or explaining proper techniques, method of operation, and safety practices.
• Observing performance and working with the employee, leader, or supervisor to resolve problems.
• Maintaining a clean and safe work area.
• Cleaning, lubricating, and maintaining tools and equipment.
• Transporting, storing, or using hazardous wastes and materials (HAZMAT) during operations.
• Performing other Aircraft Maintenance duties as required.
• Working independently and completing all repairs and modifications in a timely manner, with minimal rework or discrepancies noted.

Benefits

• Health & Welfare Benefits as covered by the Collective Bargaining Agreement (CBA)
• Medical, Dental, and Vision Insurance 75% covered by employer or opt-out option
• Short Term Disability
• Voluntary Life Insurance for purchase
• 401K Retirement plan with matching program
• Generous sick and vacation leave based on seniority aligned to the CBA
• Any additional benefits as described in the CBA

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level
• Education Level: High school or GED